User manual AGFAPHOTO LC 19010 DVD

[. . . ] Before plugging the power cord into an AC outlet, make sure that all the connections have been made. This product uses a visible laser beam which could cause hazardous radiation exposure. Do not remove any covers or look into the DVD drawers opening while power is applied. This manual explains the features available on the model of LC 19010 DVD. [. . . ] Wall Mount: Horizontal installation (1 ) Secure the wall brackets with the bolts (not provided as parts of the product, must be purchased separately) on the wall. Please see the position of the wall brackets bolts in the following picture. Please adjust the bolts of the wall brackets according to the product dimensions. Detailed installation instructions are available from your dealer; please refer to the setup guide. (2) Remove the table stand of the TV when install the TV on a wall as follow: (Please refer to page 62 & 63 ) (3) For proper ventilation, allow a clearance of 10cm on each side from the wall. Under Teletext mode, press the button once to display hidden information if available in received teletext page. - [SUBPAGE] - Carry out the function of SUBCODE in teletext model - [RED / GREEN / YELLOW / BLUE] - Corresponding to different functions in teletext mode ) if you change the value of Bass and Treble on the Sound menu, the sound mode will be changed to "Personal" automatically. nOTE: You can press SMODE button on the remote control to select the Sound Mode directly. Bass Press / button and then use / to increase or decrease the level of the lower-pitched sounds. Treble Press / button and then use / to increase or decrease the level of the higher-pitched sounds. Balance Press / button and then use / to adjust the audio output between left and right speakers. When you are satisfied with your adjustment, press the LCD MENU button to return to the previous menu or press the EXIT button to exit the main menu. Volume Press / button and then use / to adjust the sound level Press MENU button on the front panel or LCD MENU on the remote control to display the main menu. NOTE:SETUP menus are different for different input sources, if the input source is selected e. HDMI/YPbPr/VGA but there are no relative input signal, the SETUP menu may not be available. After adjust the value you want, press LCD MENU button to return to the preview MENU. Press the / button to select your option what you want to adjust in the SETUP menu. When you are satisfied with your adjustment, press the LCD MENU button to return to the previous menu or press the EXIT button to exit the main menu. Child Lock - Press button to set the Child lock ON / OFF Key Lock - Press button to set the Key lock ON / OFF Hotel Lock Press / button to select whether to set on the hotel lock, if you set this function OFF, the functions below will NOT be available. Source Lock Press ENTER or button to enter the source lock list, select the source you want to lock. Default Prog Press / button to select the default program of TV, you can cancel this function by selecting OFF. Clear Lock Press ENTER or button to clear all the lock functions in this menu, and all lock will be set OFF. [. . . ] There are 17 slide modes, press PROG button to toggle between different modes in sequent. (Start from top, Start from bottom, Start from left, Start from right, Start from upper left corner, Start from upper right corner, Merge from left / right, Horizontal blades, Vertical blades, Merge form 4 corners, Random Playback, Slide effect OFF). Press GOTO button, then press buttons to select the input position, then press numeric buttons to input the number of file you want to play. Press REPEAT button to select the repeat mode, there are 4 available modes, and the icons of them are different. [. . . ]