User manual AIRLIVE NAS-235

[. . . ] NAS-235 AirLive 2Bay DiskMaster User's Manual Copyright and Disclaimer Copyright & Disclaimer No part of this publication may be reproduced in any form or by any means, whether electronic, mechanical, photocopying, or recording without the written consent of OvisLink Corp. OvisLink Corp. has made the best effort to ensure the accuracy of the information in this user's guide. However, we are not liable for the inaccuracies or errors in this guide. All information is subject to change without notice All Trademarks are properties of their respective holders. i AirLive NAS-235 User's Manual Copyright and Disclaimer FCC Statement Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] Remember that this is not sent to the Server until you click "OK". 41 AirLive NAS-235 User's Manual 5. Administration NTP (Network Time Protocol) Enable NTP NTP Server If enabled, the NAS Server will synchronize its clock with a NTP (Network Time Protocol) Server. Enter the domain name or IP address of the NTP server you wish to use. The NTP server can be a public server (on the Internet) or a local server (on your own network). Select how often you want the NAS Server to synchronize its clock with the specified NTP server. This allows you to specify that the synchronization should be performed (for example) at 11. 00 pm each day. Use this button to synchronize with the NTP server immediately. NTP Status Synchronize . . . Sync Now Language Language Environment Specify the language environment for FTP clients and Download Manager. Download Manager Enable Download Manager If enabled, you can use Download Manager function on homepage to download files with FTP and HTTP URLs. If a special language exists in the URLs, you must make sure the Language Environment above is correct, or they possibly fail to be downloaded. The option only takes effect when Download Manager is enabled. 42 Maximum Running BT Tasks Maximum Running HTTP/FTP Tasks Enable Schedule AirLive NAS-235 User's Manual 5. If you want Download Manager to run in specified period every day, you need select "Every Day", or you can select others to limit Download Manager to run on one specified day. If selection of Day is not "Every Day", the End Time cannot be after Start Time. Time E-Mail Alert Send E-Mail. . . Alerts will be sent when there is some problem requiring the Administrator's attention. Specify one E-Mail Address that appear in the "From" field of e-mail alert generated by the NAS. Usually it's helpful for e-mail alerts to avoid being filtered as junk mails. Enter the text you wish to appear in the "Subject" field of e-mail alert generated by the NAS. Send test mail to specified e-mail address to verify whether the e-mail address can be reached. E-Mail Address From Address (Optional) Subject (Optional) Send Test Mail Use Specified SMTP You can specify one SMTP (Simple Mail Transport Protocol) server Mail Server to be used to send E-Mail. SMTP Mail Server Specify the address of the SMTP Mail Server. SMTP Port Number Specify the port number used by SMTP server. Mail Server requires If the SMTP Server requires a "login" in order to send mail, check it Authentication and enter your login name and password for the SMTP server. Meanwhile, you need specify the "From Address" as the E-Mail Address that is correlative with the Account Name. Account Name Password Specify the login name that is used to login the SMTP server. Specify the password that is used to login the SMTP server. 43 AirLive NAS-235 User's Manual 5. Administration Options Enable 'guest' account If enabled, then user can use "guest" as user ID to login to the NAS. [. . . ] If an entry for TCP/IP -> Network card is not listed, use Add - Protocol Microsoft - TCP/IP to add it. You then need to select the new entry (TCP/IP -> Network card), click Properties, and configure the IP Address tab. If your LAN has a DHCP Server, you can select "Obtain an IP Address automatically". Otherwise, you must select "Specify an IP Address", and enter values for IP Address and Subnet Mask. [. . . ]