User manual AIRLIVE OV-110TSC

[. . . ] Are in conformity with Note on the FCC standard This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. [. . . ] In the event of any manufacturing fault or breakdown, it will be repaired by OvisLink Corp. This warranty shall not be applicable in the event of damage caused by improper use of the product, accidents, faulty handling or manipulation nor any future incompatibility with third party products. LED Indicator PWR 100 LK/ACT (UTP) Color Green Green Green Status ON OFF ON OFF ON Blinking OFF LK/ACT (Fiber) Green ON Blinking OFF FDX/COL (UTP) Orange ON Blinking OFF FDX/COL (Fiber) Orange ON Blinking OFF Power ON Power OFF Works at 100Mbps Works at 10Mbps Port is connected Transmitting/Receiving from UTP devices Port is not connected Port is connected. Therefore, a link loss forward feature is provided in both UTP and Fiber side. pure Converter mode (DIP-Switch 4): When pure converter mode is enabling (on) , it operates with the minimum latency. The transmission flow does not wait until entire frame is ready, but instead it forwards the received data immediately after the data being received. Connect the power adapter to the media converter and the power outlet. Please don't change the DIP-switch setting when UTP or fiber port is transmitting or receiving data. [. . . ] This equipment may be used in AT, BE, CY, CZ, DK, EE, FI, FR, DE, GR, HU, HR, IE, IT, LV, LT, LU, MT, NL, PL, PT, SK, SI, ES, SE, GB, IS, LI, NO, CH, BG, RO, TR Declares that this device is in compliance with the essential requirements and other relevant provisions of directive 1999/5/EC. [. . . ]