User manual AIRLIVE WFP-101UV2

[. . . ] WFP-101U v2 Wireless Multi-function Print Server User's Manual Declaration of Conformity OvisLink Corp. 5F. , NO. 6, Lane 130, Min-Chuan Rd. , Hsin-Tien City, Taipei County, Taiwan Declare that the product We, Manufacturer/Importer Wireless Multi-function Print Server AirLive WFP-101U v2 is in conformity with In accordance with 2004/108/EC Directive and 1999/5 EC-R & TTE Directive Clause EN 300 328 v1. 7. 1 Description Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission equipment operating in the 2. 4GHz ISM band And using spread spectrum modulation techniques; Part 1technical Characteristics and test conditions Part2Harmonized EN covering Essential requirements under article 3. 2 of the R&TTE Directive (2006-05) Electromagnetic compatibility and Radio spectrum Matters (ERM); (2005-09) Electromagnetic compatibility(EMC) standard for radio equipment and EN 301 489-17 V1. 2. 1 Services; Part 17Specific conditions for wideband data and (2002-08) HIPERLAN equipment EN 50371:2002 Generic standard to demonstrate the compliance of low power Electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic field (10MHz ­ 300GHz) -General public business equipment EN 301 489-1 V1. 6. 1 EN 60950-1:2001+A11 Safety for information technology equipment including electrical :2004 CE marking Manufacturer/Importer Signature Name Position/ Title Albert Yeh Vice President (Stamp) Date 2008/5/5 AirLive WFP-101U v2 CE Declaration Statement Country cs Cesky [Czech] Declaration OvisLink Corp. tímto prohlasuje, ze tento AirLive WFP-101U v2 je ve shod se základními pozadavky a dalsími píslusnými ustanoveními smrnice 1999/5/ES. deklaruoja, kad sis AirLive WFP-101U v2 atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. [. . . ] You can directly connect or disconnect the all-in-one printer and check its status from the here. Quick Setup Status The current status of the all-in-one printer will be displayed here. "Connected" indicates that you are connecting to the all-in-one printer. "Idle" indicates that the all-in-one printer is free to use by any users. Connect If the all-in-one printer is free to use, "Connect" will be available. Otherwise it will be grayed out. AirLive WFP-101U v2 User's Manual 34 Quick Setup Disconnect Disconnect the selected all-in-one printer. Information To check more information about the MFP server and the all-in-one printer, please click this button. The information will be listed as the illustration above. 35 AirLive WFP-101U v2 User's Manual 4. 5 4. 5. 1 Option Settings General Setting General Setting Run MFP Manager when Execute the "MFP Manager" when Windows starts Windows starts Minimized when start MFP Manager every time. Minimize the "MFP Manager" to an icon in the system tray when you start the "MFP Manager". BY DEFAULT, IT IS ENABLED. Your Contract Information Enter your contact information here. When you connect to the all-in-one printer, your contact information will be displayed on the right side of the program for other users to contact you. AirLive WFP-101U v2 User's Manual 36 4. 5. 2 Search for MFP server If MFP server is not in the same network as your computer, you can enter the IP Address of the MFP server to do remote search. The MFP server in the "Remote MFP Server List" will be added to the "MFP Server List" for you to configure. Note: If the remote MFP server you have searched is behind a NAT Router, the MFP server may not operate normally. 37 AirLive WFP-101U v2 User's Manual Chapter 5: 5. 1 Server Configuration Introduction This chapter introduces the MFP server's system configuration utility in Windows environment. This utility provides the most complete management and configuration functions on the MFP server side. This utility only provides configuration functions for MFP server itself; it does not include configuration functions for client side or other file servers in the network environment. The Configuration Utility provides the following configuration and management functions: Search MFP server: Search All Available MFP servers on the Network. General Configuration: Configure general settings about the MFP server such as Server Name, Password, etc. System Configuration: MFP server Network Ability Setting and Firmware Upgrade. Wireless Configuration: Search for the available wireless networks and configure the wireless settings of the MFP server for the wireless connection. Administrators can force disconnect the current connection of the MFP server. Report: List the information of All Available MFP servers on the Network. We will explain each function separately in the following section. AirLive WFP-101U v2 User's Manual 38 5. 2 Search for All Available MFP server To run the "Server Manager" configuration utility, click the "Search" icon on the tool bar. The configuration utility will delay for several seconds because the utility is using the system's available network protocols to search for all MFP servers on the network. All available MFP servers will be listed under "Server Group" on the left side of the window. [. . . ] Printer Type: LPD/LPR Printer Address: Input the IP Address of the MFP server Queue Name: The queue name of the MFP server is "p1". Printer Model: Select the all-in-one printer or Printer Model that is attached to the MFP server. AirLive WFP-101U v2 User's Manual 94 6. You can print a file to check whether the MFP server is installed successfully. 95 AirLive WFP-101U v2 User's Manual Chapter 11: Troubleshooting 1. The MFP server is not found even after searching with the "MFP Manager". [. . . ]