User manual AIRLIVE WHA-5500CPE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual AIRLIVE WHA-5500CPE. We hope that this AIRLIVE WHA-5500CPE user guide will be useful to you.


AIRLIVE WHA-5500CPE : Download the complete user guide (3577 Ko)

You may also download the following manuals related to this product:

   AIRLIVE WHA-5500CPE QUICK SETUP GUIDE (4692 ko)
   AIRLIVE WHA-5500CPE QUICK SETUP GUIDE (4692 ko)
   AIRLIVE WHA-5500CPE QUICK SETUP GUIDE (4692 ko)
   AIRLIVE WHA-5500CPE QUICK SETUP GUIDE (4692 ko)
   AIRLIVE WHA-5500CPE QUICK SETUP GUIDE (4692 ko)
   AIRLIVE WHA-5500CPE QUICK SETUP GUIDE (4692 ko)
   AIRLIVE WHA-5500CPE QUICK SETUP GUIDE (4692 ko)
   AIRLIVE WHA-5500CPE QUICK SETUP GUIDE (4692 ko)
   AIRLIVE WHA-5500CPE QUICK SETUP GUIDE (4692 ko)
   AIRLIVE WHA-5500CPE V2.0 (4824 ko)
   AIRLIVE WHA-5500CPE DATASHEET (522 ko)
   AIRLIVE WHA-5500CPE QUICK SETUP GUIDE (4692 ko)

Manual abstract: user guide AIRLIVE WHA-5500CPE

Detailed instructions for use are in the User's Guide.

[. . . ] WHA-5500CPE 802. 11a Multi-Function Outdoor CPE User's Manual Declaration of Conformity We, Manufacturer/Importer OvisLink Corp. 5F. , NO. 6, Lane 130, Min-Chuan Rd. , Hsin-Tien City, Taipei County, Taiwan Declare that the product 802. 11a Multi-function Outdoor AP AirLive WHA-5500CPE is in conformity with In accordance with 89/336 EEC-EMC Directive and 1999/5 EC-R & TTE Directive Clause EN Description Broadband Radio Access Network(BRAN); 5GHz high performance RLAN; Harmonized EN Covering essential requirements of Article 3. 2 of the R&TTE Directive. Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission equipment operating in the 2. 4GHz ISM band And using spread spectrum modulation techniques; Part 1technical Characteristics and test conditions Part2Harmonized EN covering Essential requirements under article 3. 2 of the R&TTE Directive Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic compatibility(EMC) standard for radio equipment and Services; Part 17Specific conditions for wideband data and HIPERLAN equipment Generic standard to demonstrate the compliance of low power Electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic field (10MHz ­ 300GHz) -General public Safety for information technology equipment including electrical business equipment 301 893 v1. 3. 1 (2005-03) 300 328 v1. 7. 1 (2006-10) EN EN 301 489-1 v1. 6. 1 (2005-09) EN 301 489-17 v1. 2. 1 (2002-08) EN 50371:2002 EN 60950-1:2001 CE marking Manufacturer/Importer Signature Name Position/ Title : Albert Yeh Vice President (Stamp) Date 2007/10/4 AirLive WHA-5500CPE CE Declaration Statement Declaration OvisLink Corp. tímto prohlasuje, ze tento AirLive WHA-5500CPE je ve shod se základními pozadavky a dalsími píslusnými ustanoveními smrnice 1999/5/ES. [. . . ] Basic Configuration 3. 2. 2 SYSTEM MANAGEMENT Advanced Settings>> System Management Clicking the System Management button to configure system related parameters to for the WHA-5500CPE. HTTP Port No. : HTTP stands for Hyper Text Transfer Protocol. Time-out: This setting specifies the duration of idle time (inactivity) before a web browser or telnet management session times out. UPnP: The Universal Plug and Play (UPnP) feature allows a Windows XP/ME PC to discover this WHA-5500CPE and automatically show an icon on the screen. Then a user can double-click the icon to access this device directly (without having to find out its IP address). Syslog: Syslog is an IETF (Internet Engineering Task Force - the Internet standards body)-conformant standard for logging system events (RFC-3164). When the WHA-5500CPE encounters an error or warning condition (e. g. , a log-in attempt with an invalid password), it will create a log in the system log table. To be able to remotely view such system log events, you need to check the Enable Syslog box and configure the IP address of a Syslog daemon. When doing so, the WHA-5500CPE will send logged events over network to the daemon for future reviewing. Syslog server IP address: System event messages generated by the wireless access point will be sent to a Syslog daemon running on a server identified by this IP address. 25 AirLive WHA-5500CPE User's Manual 3. Basic Configuration 3. 2. 3 SNMP Settings Advanced Settings>>SNMP Settings This screen allows you to configure SNMP parameters including the system name, the location and contact information. System Name: A name that you assign to your 802. 11a+g Router. System Contact: Contact information for the system administrator responsible for managing your 802. 11a+g Router. Community String For Read: If you intend the router to be managed from a remote SNMP management station, you need to configure a read-only "community string" for read-only operation. The community string is an alphanumeric string of up to 15 characters. Community String For Write: For read-write operation, you need to configure a write "community string". 26 AirLive WHA-5500CPE User's Manual 3. Basic Configuration Assign a specific name and IP address for your SNMP trap manager: A trap manager is a remote SNMP management station where special SNMP trap messages are generated (by the router) and sent to in the network. You can add a trap manager by entering a name, an IP address, followed by pressing the ADD button. You can delete a trap manager by selecting the corresponding entry and press the DELETE SELECTED button. To enable a trap manager, check the Enable box in the corresponding entry; to disable it, un-check the Enable box. 27 AirLive WHA-5500CPE User's Manual 3. Basic Configuration 3. 2. 4 MAC FILTERING SETTINGS Advanced Settings>>Mac Filtering Settings The WHA-5500CPE allows you to define a list of MAC addresses that are allowed or denied to access the wireless network. Disable MAC address control list: When selected, no MAC address filtering will be performed. Enable GRANT address control list: When selected, data traffic from only the specified devices in the table will be allowed in the network. Enable DENY address control list: When selected, data traffic from the devices specified in the table will be denied/discarded by the network. To add a MAC address into the table, enter a Mnemonic Name and the MAC Address, and then click ADD. [. . . ] You can click the REFRESH button to get latest environment information. Site Survey list will indicate the following information: ESSID, MAC Address, Conn Mode, Channel, Turbo, Super, XR, WME, Signal strength (%), Security and Network The Site Survey table is available for only the following operation modes: (1) Access Point (2) Repeater (3) Client Infrastructure (4) Client Adhoc (5) WISP Router 59 AirLive WHA-5500CPE User's Manual 4. Manage the WHA-5500CPE 4. 5. 1 Signal survey Device Status >> Site Survey >> Signal Survey This is a unique feature from AirLive. Better signal strength means better alignment results, which aims to improve link quality. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE AIRLIVE WHA-5500CPE




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual AIRLIVE WHA-5500CPE will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.