User manual AIRLIVE WL-5460AP

[. . . ] WL-5460AP 54Mbps Multi-Function Wireless AP User's Manual Declaration of Conformity We, Manufacturer/Importer OvisLink Corp. 5F. , NO. 6, Lane 130, Min-Chuan Rd. , Hsin-Tien City, Taipei County, Taiwan Declare that the product Wireless AP AirLive WL-5460AP , WL-5450AP is in conformity with In accordance with 89/336 EEC-EMC Directive and 1999/5 EC-R & TTE Directive Clause EN Description Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission equipment operating in the 2. 4GHz ISM band And using spread spectrum modulation techniques; Part 1technical Characteristics and test conditions Part2Harmonized EN covering Essential requirements under article 3. 2 of the R&TTE Directive Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic compatibility(EMC) standard for radio equipment and Services; Part 17Specific conditions for wideband data and HIPERLAN equipment Limits and methods of measurement of radio disturbance characteristics of information technology equipment Information Technology equipment-Immunity characteristics-Limits and Methods of measurement Product standard to demonstrate the Compliance of radio base stations and Fixed terminal stations for wireless Telecommunication System with the Basic restrictions or the reference levels related to human exposure to radio Frequency electromagnetic fields ( 110 MHz ­ 40 GHz ) - General public Safety for information technology equipment including electrical business equipment 300 328 V1. 6. 1 (2004-11) EN 301 489-1 V1. 4. 1 (2002-08) EN 301 489-17 V1. 2. 1 (2002-08) EN 55022: 1998/A1 :2000/A2:2003 55024:1998/A1 :2001/A2:2003 EN EN 50385 EN 60950-1:2001/ A11:2004 marking CE Manufacturer/Importer Signature Name Position/ Title : Albert Yeh Vice President (Stamp) Date 2005/8/17 AirLive WL-5460AP / WL-5450AP CE Declaration Statement Declaration OvisLink Corp. tímto prohlasuje, ze tento AirLive WL-5460AP / WL-5450AP je ve shod se základními pozadavky a dalsími píslusnými ustanoveními smrnice 1999/5/ES. erklærer herved, Dansk [Danish] at følgende udstyr AirLive WL-5460AP / WL5450AP overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF. [. . . ] A device will not be permitted to join the BSS unless it can provide the unique SSID. An SSID is also referred to as a network name because essentially it is a name that identifies a wireless network. This field is to provide for wireless client connection. Channel Number: Allow user to set the channel manually or automatically. If "Auto" is selected, user can set the channel range to have Wireless Access Point automatically survey and choose the channel with best situation for communication. The number of channels supported depends on the region of this Access Point. All stations communicating with the Access Point must use the same channel. SSID of Extended Interface: This field is the SSID of remote Access Point to connect to. 802. 1d Spanning Tree: Spanning tree is to prevent bridge loop when there are multiple active paths between network nodes. Spanning tree allows a network design to include spare (redundant) links to provide automatic backup paths if an active link fails, without the danger of bridge loops, or the need for manual enabling/disabling of these backup links. Site Survey: Use this button to find out the remote Access Point and check the signal strength. To configure the security connection, please refer to Section 3. 9 Wireless Security Settings . . . . . . To configure the Advanced Settings, please refer to Section 3. 10 Advanced Wireless Settings . . . . . . To configure the access control, please refer to Section 3. 11 Access Control Settings . . . . . . To configure the Traffic Control, please refer to Section 3. 12 Access Control Settings . . . . . . 3. 6 WISP Mode Settings Client Mode Settings Router Settings Alias Name: Another name for WL-5460AP. Disable Wireless LAN Interface: Check the box to disable the Wireless LAN Interface, by so doing, you won't be able to make wireless connection with this Access Point in the network you are located. In other words, this device will not be visible by any wireless station. SSID (Network ID): The SSID differentiates one WLAN from another; therefore, all access points and all devices attempting to connect to a specific WLAN must use the same SSID. A device will not be permitted to join the BSS unless it can provide the unique SSID. An SSID is also referred to as a network name because essentially it is a name that identifies a wireless network. In this mode, the SSID is the remote WISP CPE to connect to. WAN Port: WL-5460AP provides 4 methods for client to access the internet. You need to contact the ISP for detail information. Virtual Server: You can use Virtual Server Settings to provide connection on internet. For example, you can have your own web server at home and provide access on internet. This will need port 80 by default for Virtual Server Settings. Special Application: This is to enable internet service such as sound, video and so on. [. . . ] Or click Upload to start the upgrade. 4. 3 Save / Reload Settings This function enables users to save the current configurations as a file (i. e. config. dat) To load configuration from a file, enter the file name or click Browse. . . Save Settings to File: Click "SAVE" to save the current configuration to file. When prompted the upper left screen, select "Save this file to disk", and the upper right screen will prompt you a dialog box to enter the file name and the file location. if you want to load a pre-saved file, enter the file name with the correct path and then click on Upload. [. . . ]