User manual APRILIA SHIVER 750 GT

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual APRILIA SHIVER 750 GT. We hope that this APRILIA SHIVER 750 GT user guide will be useful to you.


APRILIA SHIVER 750 GT : Download the complete user guide (1853 Ko)

You may also download the following manuals related to this product:

   APRILIA SHIVER 750 GT (1870 ko)
   APRILIA SHIVER 750 GT (1870 ko)
   APRILIA SHIVER 750 GT (1867 ko)
   APRILIA SHIVER 750 GT (1867 ko)
   APRILIA SHIVER 750 GT (1928 ko)
   APRILIA SHIVER 750 GT (2105 ko)
   APRILIA SHIVER 750 GT (2105 ko)
   APRILIA SHIVER 750 GT (1858 ko)
   APRILIA SHIVER 750 GT BROCHURE (4287 ko)
   APRILIA SHIVER 750 GT BROCHURE 2009 (2602 ko)

Manual abstract: user guide APRILIA SHIVER 750 GT

Detailed instructions for use are in the User's Guide.

[. . . ] We have compiled this booklet to provide a comprehensive overview of your vehicle's quality features. Please, read it carefully before riding the vehicle for the first time. it contains information , tips and precautions for using your vehicle. It also describes features, details and devices to assure you that you have made the right choice. [. . . ] If needed, top-up the fluid; the clutch must work without gripping and/or sliding. Check that there is no resistance when the side stand is pulled up and down and that the spring tension makes it snap back to its rest position. Engine stop switch (ON - OFF) Lights, warning lights, horn, rear stop light switch and electrical devices Introduce the key (2) in the fuel tank cap lock (3). When using a funnel or any other element, make sure it is perfectly clean. To adjust the setting, the shock absorber is fitted with a set screw (1) that adjusts the hydraulic rebound damping, a ring nut that adjusts the spring preloading (2) and a locking ring nut (3). Turn the (1) screw to adjust the shock absorber hydraulic rebound damping. 29 in) Hydraulic brake (clicks from fully closed): 12 Shock absorber preloading: screw 4 turns (clockwise) with reference to SOFT adjustment Hydraulic brake (clicks from fully closed): 9 Rear shock absorber adjustment: rider + passenger + luggage (HARD adjustment) Shock absorber preloading: screw 6/7 turns (clockwise) with reference to SOFT adjustment Hydraulic brake (clicks from fully closed): 6/7 Push repeatedly on handlebar with the front brake lever pulled to compress the fork completely. The stroke should be soft and there should be no oil marks on the stems. Check the tightening of all the components and the correct operation of the front and rear suspension joints. The distance between the end of the lever (1) and the handgrip (2) can be adjusted by rotating the set screw (3). The MAX and MIN clicks correspond to a lever end-handgrip distance of about 114 mm (4. Push the control lever (1) forward and turn the set screw (3) until the lever (1) is at the desired distance. Turn the cam (2) until the adequate position for the pedal (3) is obtained. The distance between the end of the lever (1) and the handgrip (2) can be adjusted by rotating the set screw (3). The MAX and MIN clicks correspond to a lever end-handgrip distance of about 118 mm (4. Push the control lever (1) forward and turn the set screw (3) until the lever (1) is at the desired distance. Running the engine in is essential to ensure engine durability and correct operation. Twisty roads and gradients are ideal to run in engine, brakes and suspensions effectively. This ensures that components operate under both "loaded" and "unloaded" conditions, allowing the engine components to cool. Do not twist the throttle grip abruptly and completely when the engine is working at a low revs, either during or after runin. During the first 100 Km (62 miles) use the brakes gently, avoiding sudden or prolonged braking. Starting up the engine (03_10, 03_11, 03_12, 03_13, 03_14, 03_15) This is a remarkably powerful vehicle. [. . . ] Using aggressive detergents may damage the surface treatment of these components. Before transporting the vehicle, empty the fuel tank well and make sure it is perfectly dry. During transport, the vehicle must be well anchored and upright, and first gear must be engaged to avoid fuel and oil leaks. Check that vertical oscillation at a point between the pinion and the crown on the lower branch of the chain is around 25 mm (0. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE APRILIA SHIVER 750 GT




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual APRILIA SHIVER 750 GT will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.