User manual ASROCK 939DUAL-VSTA
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ASROCK 939DUAL-VSTA. We hope that this ASROCK 939DUAL-VSTA user guide will be useful to you.
You may also download the following manuals related to this product:
ASROCK 939DUAL-VSTA INSTALLATION GUIDE (1616 ko)
ASROCK 939DUAL-VSTA INSTALLATION GUIDE (2584 ko)
ASROCK 939DUAL-VSTA INSTALLATION GUIDE (2584 ko)
ASROCK 939DUAL-VSTA INSTALLATION GUIDE (2584 ko)
ASROCK 939DUAL-VSTA INSTALLATION GUIDE (2584 ko)
ASROCK 939DUAL-VSTA INSTALLATION GUIDE (2584 ko)
ASROCK 939DUAL-VSTA INSTALLATION GUIDE (2584 ko)
Manual abstract: user guide ASROCK 939DUAL-VSTA
Detailed instructions for use are in the User's Guide.
[. . . ] 939Dual-VSTA
User Manual
Version 1. 0 Published June 2006 Copyright©2006 ASRock INC. All rights reserved.
1
Copyright Notice:
No part of this manual may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners' benefit, without intent to infringe.
Disclaimer:
Specifications and information contained in this manual are furnished for informational use only and subject to change without notice, and should not be constructed as a commitment by ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this manual. [. . . ] Then connect the white end of SATA power cable to the power connector of the power supply. Besides four default USB 2. 0 ports on the I/O panel, there is one USB 2. 0 header on this motherboard. This USB 2. 0 header can support two USB 2. 0 ports.
Serial ATA (SATA) Power Cable
(Optional)
connect to the SATA HDD power connector connect to the power supply
USB 2. 0 Header
(9-pin USB45) (see p. 11 No. 21)
1 GND P+4 P-4 USB_PWR USB_PWR P-5 P+5 GND DUMMY
Infrared Module Header
(5-pin IR1) (see p. 11 No. 24)
1
IRTX +5VSB DUMMY
This header supports an optional wireless transmitting and receiving infrared module.
GND IRRX
Internal Audio Connectors
(4-pin CD1) (CD1: see p. 11 No. 35)
CD-L GND GND CD-R
CD1
This connector allows you to receive stereo audio input from sound sources such as a CD-ROM, DVD-ROM, TV tuner card, or MPEG card. This is an interface for front panel audio cable that allows convenient connection and control of audio devices.
Front Panel Audio Header
(8-pin AUDIO1) (see p. 11 No. 26)
1 AUD-OUT-L GND AUD-OUT-R MIC-POWER MIC
GND BACKOUT-R BACKOUT-L
21
System Panel Header
(9-pin PANEL1) (see p. 11 No. 17)
1
PLED+ PLEDPWRBTN# GND
This header accommodates several system front panel functions.
DUMMY RESET# GND HDLEDHDLED+
Chassis Speaker Header
(4-pin SPEAKER 1) (see p. 11 No. 18)
1
SPEAKER DUMMY DUMMY +5V
Please connect the chassis speaker to this header.
Chassis Fan Connector
(3-pin CHA_FAN1) (see p. 11 No. 19)
GND +12V CHA_FAN_SPEED
Please connect a chassis fan cable to this connector and match the black wire to the ground pin. Please connect the CPU fan cable to this connector and match the black wire to the ground pin. Please connect an ATX power supply to this connector.
CPU Fan Connector
(4-pin CPU_FAN1) (see p. 11 No. 3)
GND +12V CPU_FAN_SPEED FAN_SPEED_CONTROL
ATX Power Connector
(20-pin ATXPWR1) (see p. 11 No. 4)
Please note that it is necessary to connect a power supply with ATX 12V plug to this connector. Failing to do so will cause power up failure.
Game Port Header
(15-pin GAME1) (see p. 11 No. 25)
1
+5V JBB1 JBX MIDI_OUT JBY JBB2 MIDI_IN
Connect a Game cable to this header if the Game port bracket is installed.
+5V JAB2 JAY GND GND JAX JAB1 +5V
22
2. 8
SAT SATAII Hard Disk Setup Guide
Before installing SATAII hard disk to your computer, please carefully read below SATAII hard disk setup guide. Some default setting of SATAII hard disks may not be at SATAII mode, which operate with the best performance. In order to enable SATAII function, please follow the below instruction with different vendors to correctly adjust your SATAII hard disk to SATAII mode in advance; otherwise, your SATAII hard disk may fail to run at SATAII mode. Western Digital
7 8 5 6 3 4 1 2
If pin 5 and pin 6 are shorted, SATA 1. 5Gb/s will be enabled. On the other hand, if you want to enable SATAII 3. 0Gb/s, please remove the jumpers from pin 5 and pin 6. SAMSUNG
7 8 5 6 3 4 1 2
If pin 3 and pin 4 are shorted, SATA 1. 5Gb/s will be enabled. [. . . ] OnBoard Game Port Use this item to enable the Game Port or disable it. OnBoard MIDI Port Use this itme to select the address for the MIDI Port or disable it. Configuration options: [Disabled], [300], and [330].
39
3. 3. 8 USB Configuration
BIOS SETUP UTILITY Advanced USB Configuration
USB Controller USB 2. 0 Support Legacy USB Support [Enabled] [Enabled] [Disabled] To enable or disable the onboard USB controllers.
+F1 F9 F10 ESC
Select Screen Select Item Change Option General Help Load Defaults Save and Exit Exit
v02. 54 (C) Copyright 1985-2003, American Megatrends, Inc.
USB Controller Use this item to enable or disable the use of USB controller. USB 2. 0 Support Use this item to enable or disable the USB 2. 0 support. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ASROCK 939DUAL-VSTA
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ASROCK 939DUAL-VSTA will begin.