User manual ASROCK K8NF4G-SATA2 R2.0

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ASROCK K8NF4G-SATA2 R2.0. We hope that this ASROCK K8NF4G-SATA2 R2.0 user guide will be useful to you.


ASROCK K8NF4G-SATA2 R2.0 : Download the complete user guide (311 Ko)

You may also download the following manuals related to this product:

   ASROCK K8NF4G-SATA2 R2.0 INSTALLATION GUIDE (521 ko)
   ASROCK K8NF4G-SATA2 R2.0 INSTALLATION GUIDE (522 ko)
   ASROCK K8NF4G-SATA2 R2.0 INSTALLATION GUIDE (525 ko)
   ASROCK K8NF4G-SATA2 R2.0 INSTALLATION GUIDE (515 ko)
   ASROCK K8NF4G-SATA2 R2.0 INSTALLATION GUIDE (640 ko)
   ASROCK K8NF4G-SATA2 R2.0 INSTALLATION GUIDE (837 ko)
   ASROCK K8NF4G-SATA2 R2.0 INSTALLATION GUIDE (822 ko)
   ASROCK K8NF4G-SATA2 R2.0 INSTALLATION GUIDE (59 ko)

Manual abstract: user guide ASROCK K8NF4G-SATA2 R2.0

Detailed instructions for use are in the User's Guide.

[. . . ] K8NF4G-SATA2 User Manual Version 2. 1 Published March 2006 Copyright©2006 ASRock INC. All rights reserved. 1 Copyright Notice: No part of this manual may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners' benefit, without intent to infringe. Disclaimer: Specifications and information contained in this manual are furnished for informational use only and subject to change without notice, and should not be constructed as a commitment by ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this manual. [. . . ] High Definition Audio supports Jack Sensing, but the panel wire on the chassis must support HDA to function correctly. Please follow the instruction in our manual and chassis manual to install your system. If you use AC'97 audio panel, please install it to the front panel audio header as below: A. Click the icon on the lower right hand taskbar to enter Realtek HD Audio Manager. Click "Audio I/O", select "Connector Settings" , choose "Disable front panel jack detection", and save the change by clicking "OK". 17 System Panel Header (9-pin PANEL1) (see p. 9 No. 15) 1 PLED+ PLEDPWRBTN# GND This header accommodates several system front panel functions. DUMMY RESET# GND HDLEDHDLED+ Chassis Speaker Header (4-pin SPEAKER 1) (see p. 9 No. 16) 1 SPEAKER DUMMY DUMMY +5V Please connect the chassis speaker to this header. Chassis Fan Connector (3-pin CHA_FAN1) (see p. 9 No. 14) GND +12V CHA_FAN_SPEED CPU Fan Connector (3-pin CPU_FAN1) (see p. 9 No. 30) CPU_FAN_SPEED +12V GND ATX Power Connector (20-pin ATXPWR1) (see p. 9 No. 28) Please connect a chassis fan cable to this connector and match the black wire to the ground pin. Please connect the CPU fan cable to this connector and match the black wire to the ground pin. Please connect an ATX power supply to this connector. ATX 12V Power Connector (4-pin ATX12V1) (see p. 9 No. 2) Please note that it is necessary to connect a power supply with ATX 12V plug to this connector. Failing to do so will cause power up failure. +5V JBB1 JBX MIDI_OUT JBY JBB2 MIDI_IN 1 +5V JAB2 JAY GND GND JAX JAB1 +5V Game Port Header (15-pin GAME1) (see p. 9 No. 22) Connect a Game cable to this header if the Game port bracket is installed. Serial port connector (9-pin COM1) (see p. 9 item 29) 1 RRXD1 DDTR#1 DDSR#1 CCTS#1 This COM1 connector supports a serial port module. RRI#1 RRTS#1 GND TTXD1 DDCD#1 18 2. 8 SAT SATAII Hard Disk Setup Guide Before installing SATAII hard disk to your computer, please carefully read below SATAII hard disk setup guide. Some default setting of SATAII hard disks may not be at SATAII mode, which operate with the best performance. In order to enable SATAII function, please follow the below instruction with different vendors to correctly adjust your SATAII hard disk to SATAII mode in advance; otherwise, your SATAII hard disk may fail to run at SATAII mode. Western Digital 7 8 5 6 3 4 1 2 If pin 5 and pin 6 are shorted, SATA 1. 5GB/s will be enabled. On the other hand, if you want to enable SATAII 3. 0GB/s, please remove the jumpers from pin 5 and pin 6. SAMSUNG 7 8 5 6 3 4 1 2 If pin 3 and pin 4 are shorted, SATA 1. 5GB/s will be enabled. On the other hand, if you want to enable SATAII 3. 0GB/s, please remove the jumpers from pin 3 and pin 4. HITACHI Please use the Feature Tool, a DOS-bootable tool, for changing various ATA features. Please visit HITACHI's website for details: http://www. hitachigst. com/hdd/support/download. htm The above examples are just for your reference. [. . . ] Parallel Port Mode Use this item to set the operation mode of the parallel port. If this option is set to [ECP+EPP], it will show the EPP version in the following item, "EPP Version". OnBoard Game Port Use this item to enable the Game Port or disable it. OnBoard MIDI Port Use this itme to select the address for the MIDI Port or disable it. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ASROCK K8NF4G-SATA2 R2.0




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ASROCK K8NF4G-SATA2 R2.0 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.