User manual ASROCK K8S8X
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ASROCK K8S8X. We hope that this ASROCK K8S8X user guide will be useful to you.
Manual abstract: user guide ASROCK K8S8X
Detailed instructions for use are in the User's Guide.
[. . . ] K8S8X
User Manual
Version 1. 02 Published May 2004 Copyright©2004 ASRock INC. All rights reserved.
1
Copyright Notice:
No part of this manual may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners' benefit, without intent to infringe.
Disclaimer:
Specifications and information contained in this manual are furnished for informational use only and subject to change without notice, and should not be constructed as a commitment by ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this manual. [. . . ] These connectors allow you to receive stereo audio input from sound sources such as a CD-ROM, DVD-ROM, TV tuner card, or MPEG card. This is an interface for the front panel audio cable that allows convenient connection and control of audio devices.
USB 2. 0 Header
(9-pin USB67) (see p. 8, No. 19)
1
USB_PWR P-6 P+6 GND DUMMY
GND P+7 P-7 USB_PWR
Shared USB 2. 0 Header
(9-pin USB45H)
(see p. 8, No. 29)
1 USB_PWR P-4 P+4 GND USB_PWR P-5 P+5 GND DUMMY
Infrared Module Header
(5-pin IR1) (see p. 8, No. 18)
1
IRTX +5V DUMMY
GND IRRX
Internal Audio Connectors
(4-pin CD1, 4-pin AUX1) (CD1: see p. 8, No. 27)
CD-L GND GND CD-R
CD1
AUX-L GND GND AUX-R
AUX1
Front Panel Audio Header
(9-pin AUDIO1) (see p. 8, No. 25)
1
GND +5VA BACKOUT-R BACKOUT-L
AUD-OUT-L GND AUD-OUT-R MIC-POWER MIC
16
System Panel Header
(9-pin PANEL1) (see p. 8, No. 15)
1
PLED+ PLEDPWRBTN# GND
This header accommodates several system front panel functions.
DUMMY RESET# GND HDLEDHDLED+
Chassis Speaker Header
(4-pin SPEAKER 1) (see p. 8, No. 17)
1
SPEAKER DUMMY DUMMY +5V
Please connect the chassis speaker to this header.
Chassis Fan Connector
(3-pin CHA_FAN1) (see p. 8, No. 14)
GND +12V CHA_FAN_SPEED
Please connect the chassis fan cable to this connector and match the black wire to the ground pin. Please connect the CPU fan cable to this connector and match the black wire to the ground pin. Connect a Game cable to this connector if the Game port bracket is installed.
CPU Fan Connector
(3-pin CPU_FAN1) (see p. 8, No. 1)
GND +12V CPU_FAN_SPEED
Game Connector
(15-pin GAME1)
(see p. 8, No. 20)
1
+5V JBB1 JBX MIDI_OUT JBY JBB2 MIDI_IN
+5V JAB2 JAY GND GND JAX JAB1 +5V
Power LED Connector
(3-pin PWRLED1) (see p. 8, No. 16)
1
PLEDPLED+ PLED+
Please connect a 3-pin power LED cable to this connector.
ATX Power Connector
(20-pin ATXPWR1) (see p. 8, No. 24)
Please connect an ATX power supply to this connector.
ATX 12V Connector
(4-pin U74) (see p. 8, No. 5)
Please connect an ATX 12V power supply to this connector.
17
2. 7 Serial ATA (SATA) Hard Disks Installation
This motherboard adopts SiS 964 southbridge chipset that supports Serial ATA (SATA) hard disks and RAID functions. You may install SATA hard disks on this motherboard for internal storage devices. STEP 1: Install the SATA hard disks into the drive bays of your chassis. STEP 2: Connect one end of the SATA data cable to the motherboard's primary SATA connector (SATA1). STEP 3: Connect the other end of the SATA data cable to the primary SATA hard disk. If you just want to install only one SATA HDD, the installation process is complete at this step. [. . . ] Configuration options: [Auto], [2CLK], [3CLK], [4CLK], [5CLK], and [6CLK]. Configuration options: [Auto], [5CLK], [6CLK], [7CLK], [8CLK], [9CLK], [10CLK], [11CLK], and [12CLK]. Configuration options: [Auto], [2CLK], [3CLK], [4CLK], [5CLK], and [6CLK].
3. 7. 2
South Bridge Configuration
BIOS SETUP UTILITY Chipset
SouthBridge Chipset Configuration
Onboard Ac97 Audio Onboard LAN [Auto] [Enabled]
Enable / Disable onboard Audio device.
+F1 F9 F10 ESC
Select Screen Select Item Change Option General Help Load Defaults Save and Exit Exit
v02. 54 (C) Copyright 1985-2003, American Megatrends, Inc.
OnBoard AC'97 Audio Select [Disabled], [Auto] or [Enabled] for the onboard AC'97 Audio feature. OnBoard LAN Use this item to enable or disable the onboard LAN device.
33
3. 7. 3
AGP Configuration
BIOS SETUP UTILITY Chipset
AGP Chipset Configuration
AGP Aperture Size AGP Data Rate AGP Fast Write Primary Graphics Adapter [64 MB] [8X] [Disabled] [PCI]
Aperture size defines a Window into system memory for the AGP video controller. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ASROCK K8S8X
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ASROCK K8S8X will begin.