User manual ASROCK P4DUAL-880PRO
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ASROCK P4DUAL-880PRO. We hope that this ASROCK P4DUAL-880PRO user guide will be useful to you.
Manual abstract: user guide ASROCK P4DUAL-880PRO
Detailed instructions for use are in the User's Guide.
[. . . ] P4Dual-880 Pro
User Manual
Version 1. 0 Published April 2005 Copyright©2005 ASRock INC. All rights reserved.
1
Copyright Notice:
No part of this manual may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners' benefit, without intent to infringe.
Disclaimer:
Specifications and information contained in this manual are furnished for informational use only and subject to change without notice, and should not be constructed as a commitment by ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this manual. [. . . ] Besides, to optimize compatibility and performance, please connect your hard disk drive to the primary IDE connector (IDE1, blue) and CD-ROM to the secondary IDE connector (IDE2, black). 13)
SATA1 SATA2
These two Serial ATA (SATA) connectors support SATA data cables for internal storage devices. Either end of the SATA data cable can be connected to the SATA hard disk or the SATA connector on the motherboard.
Serial ATA (SATA) Data Cable
18
Serial ATA (SATA) Power Cable
(Optional) connect to the SATA HDD power connector connect to the power supply
Please connect the black end of SATA power cable to the power connector on the drive. Then connect the white end of SATA power cable to the power connector of the power supply. ASRock 8CH I/O provides you 4 ready-to-use USB 2. 0 ports on the rear panel. If the rear USB ports are not sufficient, this USB 2. 0 header is available to support 2 extra USB 2. 0 ports. ASRock 8CH I/OTM provides you 4 ready-to-use USB 2. 0 ports on the rear panel. If the rear USB ports are not sufficient, this USB 2. 0 header is available to support 2 extra USB 2. 0 ports. This header supports an optional wireless transmitting and receiving infrared module.
USB 2. 0 Header
(9-pin USB67) (see p. 10, No. 20)
1
USB_PWR P-7 P+7 GND DUMMY
GND P+6 P-6 USB_PWR
USB 2. 0 Header
(9-pin USB45) (see p. 10, No. 19)
1
USB_PWR P-4 P+4 GND DUMMY
GND P+5 P-5 USB_PWR
Infrared Module Header
(5-pin IR1) (see p. 10, No. 22)
1
IRTX +5V DUMMY
GND IRRX
Internal Audio Connectors
(4-pin CD1) (CD1: see p. 10, No. 29)
CD-R GND GND CD-L
CD1
These connectors allow you to receive stereo audio input from sound sources such as a CD-ROM, DVD-ROM, TV tuner card, or MPEG card. This is an interface for the front panel audio cable that allows convenient connection and control of audio devices.
Front Panel Audio Header
(9-pin AUDIO1) (see p. 10, No. 25)
1
GND +5VA BACKOUT-R BACKOUT-L
AUD-OUT-L DUMMY AUD-OUT-R MIC-POWER MIC
19
System Panel Header
(9-pin PANEL1) (see p. 10, No. 16)
1
PLED+ PLEDPWRBTN# GND
This header accommodates several system front panel functions.
DUMMY RESET# GND HDLEDHDLED+
Chassis Speaker Header
(4-pin SPEAKER 1) (see p. 10, No. 17)
1
SPEAKER DUMMY DUMMY +5V
Please connect the chassis speaker to this header.
Chassis Fan Connector
(3-pin CHA_FAN1) (see p. 10, No. 18)
GND +12V CHA_FAN_SPEED
Please connect the chassis fan cable to this connector and match the black wire to the ground pin. Please connect the CPU fan cable to this connector and match the black wire to the ground pin. Connect a Game cable to this connector if the Game port bracket is installed.
CPU Fan Connector
(3-pin CPU_FAN1) (see p. 10, No. 2)
CPU_FAN_SPEED +12V GND
Game Connector
(15-pin GAME1) (see p. 10, No. 23)
1
+5V JBB1 JBX MIDI_OUT JBY JBB2 MIDI_IN
+5V JAB2 JAY GND GND JAX JAB1 +5V
ATX Power Connector
(20-pin ATXPWR1) (see p. 10, No. [. . . ] Parallel Port Address Use this item to set the address for the onboard parallel port or disable it. Parallel Port Mode Use this item to set the operation mode of the parallel port. If this option is set to [ECP+EPP], it will show the EPP version in the following item, "EPP Version". Configuration options: [IRQ5] and [IRQ7].
33
OnBoard Game Port Use this item to enable the Game Port or disable it. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ASROCK P4DUAL-880PRO
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ASROCK P4DUAL-880PRO will begin.