User manual ASROCK P4I45PE
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ASROCK P4I45PE. We hope that this ASROCK P4I45PE user guide will be useful to you.
Manual abstract: user guide ASROCK P4I45PE
Detailed instructions for use are in the User's Guide.
[. . . ] P4i45PE User Manual
Version 1. 0 Published May 2003 Copyright©2003 ASRock INC. All rights reserved.
1
Copyright Notice:
No part of this manual may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners' benefit, without intent to infringe.
Disclaimer:
Specifications and information contained in this manual are furnished for informational use only and subject to change without notice, and should not be constructed as a commitment by ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this manual. [. . . ] Connect the fan cable to the connector matching the black wire to the ground pin. Connect an ATX power supply to the connector.
GND +12V CPU_FAN_SPEED
Easy I/O header (16-pin EASY_IO1 ) (see p. 9 item 27 )
1
+12V +5V +3V GPI3 GPO4 GPO5 GPO6 GPO7
GND GPO3 GPO2 GPO1 GPO0 GPI2 GPI1 GPI0
This header is designed to meet advanced users' needs for processing specific electronic experiments or specific application. The tables below display each pin's coordinated pin of the super I/O or the south bridge controller. GPI3 GPIO35
Input Pins Pins of Easy I/O Coordinated Pins of South Bridge (ICH4)
GPI0 GPIO32
GPI1 GPIO33
GPI2 GPIO34
16
Output Pins Pins of Easy I/O Coordinated Pins of Super I/O (W83627HF-AW)
GPO0 GPO1 GPO2 GPO3 GPO4 GPO5 GPO6 GPO7 GP23 GP24 GP27 GP30 GP31 GP32 GP33 GP34
For the detailed information of the super I/O, Winbond 83627HF-AW, please refer to the datasheet provided by Winbond at http://www. winbond. com. tw/PDF/sheet/w83627hf. pdf For the detailed information of the south bridge controller, Intel ICH4, please refer to the datasheet provided by Intel at http://www. intel. com/design/chipsets/datashts/290744. htm
17
Chapter 3 BIOS Setup
3. 1 BIOS Setup Utility
This section explains how to configure your system using the BIOS Setup Utility. When you start up the computer, there is a chance for you to run the BIOS Setup. Press <F2> during the Power-On-Self-Test (POST) to enter the BIOS Setup Utility, otherwise, POST continues with its test routines. If you wish to enter the BIOS Setup after POST, restart the system by pressing <Ctl> + <Alt> + <Delete>, or by pressing the reset button on the system chassis. It is a menu-driven program, which allows you to scroll through its various sub-menus and select among the predetermined choices. Because the BIOS software is constantly being updated, the following BIOS setup screens and descriptions are for reference purpose only, and may not exactly match what you see on your screen.
3. 1. 1 BIOS Menu Bar
The top of the screen has a menu bar with the following selections: MAIN Sets up the basic system configuration ADVANCED Sets up the advanced features SECURITY Sets up the security features POWER Configures Power Management features BOOT Configures the default system device that is used to locate and load the Operating System EXIT Exits the current menu or the BIOS Setup To access the menu bar items, press the right or left arrow key on the keyboard until the desired item is highlighted.
3. 1. 2 Legend Bar
At the bottom of the Setup Screen is a legend bar. The following table lists the keys in the legend bar with their corresponding functions.
18
Navigation Key(s) <F1> <ESC> / / +/<Enter> <F9> <F10>
Function Description Displays the General Help Screen Jumps to the Exit menu or returns to the upper menu from the current menu Moves cursor up or down between fields Selects menu to the left or right Increases or decreases values Brings up a selected menu for a highlighted field Loads all the setup items to the default values Saves changes and exits Setup
3. 2 Main Menu
When you enter the BIOS Setup Utility, the following screen appears.
Main
Advanced
Security
AMIBIOS SETUP UTILITY - VERSION 3. 31a Boot Power Exit
[
System Date System Time Floppy Drives IDE Devices BIOS Version Processor Type Processor Speed Cache Size Microcode Update Total Memory DDR1 DDR2
Setup Help
]
Apr 29 2003 Tue 16:07:40
Month: Jan - Dec Day: 01 - 31 Year: 1980 - 2099
P4I45PE BIOS P1. 20 Pentium (R) 4 CPU 2400 MHz 512 KB F24 / 0F 256 MB 256 MB / 133 MHz (DDR266) None
F1:Help Esc:Exit
:Select Item :Select Menu
+/-:Change Values Enter:Select Sub-Menu
F9:Setup Defaults F10:Save & Exit
System Date [Month/Day/Year] Set the system date that you specify. Valid values for month, day, and year are Month: (Jan to Dec), Day: (1 to 31), Year: (up to 2099). System Time [Hour:Minute:Second] Set the system to the time that you specify. IDE Devices Use this to configure IDE devices.
19
TYPE To set the type of the IDE device, first, please select "IDE Devices" on Main menu and press <Enter> to get into the sub-menu. Then, select among "Primary IDE Master", "Primary IDE Slave", "Secondary IDE Master", and "Secondary IDE Slave" to make configuration of its type. After making your selections on this sub-menu, press <ESC> key to return to the upper menu, in whcih the hard disk drive field will display the size of the hard disk drive that you configured. Below are the configuration options.
AMIBIOS SETUP UTILITY - VERSION 3. 31a
Main
Primary IDE Master: [ Auto Setup Help ]
Type Cylinders Heads Write Precompensation Sectors Maximum Capacity LBA Mode Block Mode Fast Programmed I/O Modes 32 Bit Transfer Mode Ultra DMA Mode
Select how to set the parameters of drive, Or Select [AUTO] to set all HDD parameters automatically.
On On Auto On Auto
F1:Help Esc:Previous Menu
:Select Item
+/-:Change Values Enter:Select Sub-Menu
F9:Setup Defaults F10:Save & Exit
[USER]: It allows user to manually enter the number of cylinders, heads, and sectors per track for the drive. Before attempting to configure a hard disk drive, make sure you have the correct configuration information supplied by the drive manufacturer. Incorrect settings may cause the system to fail to recognize the installed hard disk. If autodetection is successful, the BIOS Setup automatically fills in the correct values for the remaining fields on this sub-menu. If the autodetection fails, it may due to that the hard disk is too old or too new. If the hard disk was already formatted on an older system, the BIOS Setup may detect incorrect parameters. In these cases, select [User] to manually enter the IDE hard disk drive parameters. [. . . ] Power Setup Menu
Main
Advanced
Security
AMIBIOS SETUP UTILITY - VERSION 3. 31a Boot Power Exit
[
Suspend To RAM <S3> Repost Video on S3 Resume Restore on AC / Power Loss Ring-In Power On PCI Devices Power On PS / 2 keyboard Power On RTC Alarm Power On RTC Alarm Date RTC Alarm Hour RTC Alarm Minute RTC Alarm Second
Setup Help
]
Disabled Disabled Power Off Disabled Disabled Disabled Disabled Every Day 12 30 30
<Enter> to select auto-detect or disable the ACPI S3 feature.
F1:Help Esc:Exit
:Select Item :Select Menu
+/-:Change Values Enter:Select Sub-Menu
F9:Setup Defaults F10:Save & Exit
Suspend To RAM (S3): This field allows you to select whether to auto-detect or disable the ACPI Suspend-to-RAM feature. Repost Video on S3 Resume: This feature allows you to repost video on S3 resume. It is recommended to enable this feature under Microsoft® Windows® 98 / ME. Restore on AC/Power Loss: This allows you to set the power state after an unexpected AC/power loss. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ASROCK P4I45PE
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ASROCK P4I45PE will begin.