User manual AUDIO ANALOGUE ENIGMA

[. . . ] Dear Audiophile, Congratulations and thank you for choosing the multi-function audio unit Enigma. Enigma is a unique unit, the first example of multi-function high-end unit. enigma provides circuital solutions with no compromises and features capable to satisfy advanced users' demands. Its top-class, low-tolerance passive components were chosen for their quality and characteristics after long listening tests. [. . . ] When this button is pressed and immediately released, the frequency level is decreased by one step (SEARCH function). When pressed and released after one second, the frequency level is decreased until a lower-frequency radio station Is reached (SCAN function): if this is not possible, the whole bandwidth is scanned backward until the initial frequency level is reached. This button is active only when the radio tuner is selected as sound source. By pressing this button when the unit is in normal mode, the radio tuner is tuned on the station stored in the memory allocation that precedes the last selected allocation. When the unit exits the Standby mode and when changing modulation type, pressing this button tunes the radio tuner on the station stored in the 18th memory allocation. If no radio station is stored into the selected allocation, an EMPTY indication shows on the display and the radio tuner switches back to the previous station. When in "Storage" mode, pressing this button allows choosing the memory allocation where to store the selected radio station. Please refer to "Radio stations storage" paragraph for further details about storage procedure. Please refer to "Stored Radio stations tuning" paragraph for further details about radio stations tuning. This button is active only when the radio tuner is selected as sound source. Pressing this button puts the unit in "Storage" mode and it is possible to store the current radio station in the unit's memory permanently. Please refer to "Radio stations storage" paragraph for further details about storage procedure. This button is active only when the radio tuner is selected as sound source. By pressing this button it is possible to select the desired sound source: CD, Tuner, Line1, and Line2. Tuned LED (green) turns on when there is a radio station on the selected frequency. The LED is active only when the radio tuner is selected as sound source. Stereo LED (red/green) lights in different colour according to the selected reproduction mode. When the unit is in stereophonic mode, the STEREO LED turns green when the incoming signal is stereophonic, otherwise it stays off. When the unit is in monophonic mode, the STEREO LED turns red to show that the monophonic signal reproduction is being forced. The LED is active only when the radio tuner is selected as sound source. SEARCH+: a single pressure of this button increases of one step the tuned frequency, a continuous pressure of a few seconds activates a fast research increasing the tuned frequency of 6 steps. SEARCH-: a single pressure of this button decreases of one step the tuned frequency, a continuous pressure of a few seconds activates a fast research decreasing the tuned frequency of 6 steps. [. . . ] When headphones are plugged into the unit, the speakers are automatically put in mute mode. Volume settings and silencing (mute) The volume knob on the front panel and the Vol+/Vol- buttons on the remote controller change the general sound level. the mute button on the remote controller allows silencing the unit completely. This function is useful any time you have to suddenly decrease volume, for example when answering to a phone call or talking with people or changing CD in the player. [. . . ]