User manual AUDIO ANALOGUE ROSSINI 2.0 REV1.1A

[. . . ] the equipment has been projected and manufactured according to the Regulations of the Community 89/336/CEE and is marked CE. This equipment can't be used for different purposes other than those for which it has been manufactured. AUDIO ANALOGUE does not take any responsibilities for accidents or damages due to improper use of the equipment. WARNING Please do respect the safety standards contained in this manual before starting to operate the equipment. [. . . ] Keep the equipment far from sources of heat such as the solar light, kitchens, radiators etc. Always Switch off and unplug the supply cable before cleaning the equipment externally. If the amplifier was carried from an extremely cold environment to and extremely hot one, it could create internal condensation, causing possible bad functioning. If this occurs, please wait for at least an hour before using it again, to allow it to gradually reach room temperature. INSTRUCTIONS TO PUT IT OUT OF SERVICE Consult qualified staff Follow the regulations of the current legislation regarding recycling and waste disposal. When playback is stopped, it allows choosing the CD track from which resuming playback or search CD tracks backward. When playback is stopped, it allows choosing the CD track from which resuming playback or search CD tracks forward. If necessary, replace them with others of the same kind (see back panel). 0123456789 (NUMERIC KEYS): According to the functioning state of the CD player you have two different actions: - when the CD player is in stop it is possible to select a track pressing the number of the correspondent song (the unit waits for PLAY to be pressed). - When the CD player is playing, pressing the number of the desired song it immediately skips to the indicated track. TIME: pressing this key it is possible to visualize different information on the reproducing time. The alternative modalities are: - the time that is left until the end of the song, modality "end of track" (on the display it appears in "_" between the indication of the minutes and the seconds). - The time that is left until the end of the CD, modality "end of disc" (on the display it appears in "-" between he indication of the minutes and the seconds). - The time that has gone by since the beginning of the CD, modality "total time" (on the display it appears in ". RPT (REPEAT): This key has two different functions according to the functioning state of the CD player. - When the CD player is in stop it is possible to choose to repeat a track or the entire disc by pressing the key once or twice. To choose to repeat a track you press the keys PREV and NEXT or pressing directly the number of the track using the numeric keys. - When the CD player is reproducing, pressing this key in two different moments determines the initial instant (A) and final (B) of a random section to repeat. When this option is active, you can de-activate it by pressing the key again, and the normal reproduction of the CD is reestablished. 0123456789 (TASTI NUMERICI): a seconda dello stato di funzionamento del CD player si hanno due differenti comportamenti: - Quando il CD player è in stop è possibile selezionare una traccia digitando il numero del brano corrispondente, l'apparecchio rimane in attesa del comando di riproduzione (PLAY). If one of the items listed above is missing, please contact your Audio Analogue retailer. After extracting the smallest items from the package, pull out the unit carefully. [. . . ] When the CD player is in standby mode, the analog circuits are off, reducing power consumption and minimizing damage risks due to overloads or lightning. Please set the unit on stand-by mode when unused for short periods of time or turn the unit off unplugging it from the outlet when unused for long periods of time or during lightning and electric storms. Display is off No sound Burned-out fuses Faulty or incorrectly plugged connectors between Rossini CD Player and the amplifier Incorrectly selected source on the amplifier CD player is on but the display is off Faulty front panel No battery/ worn-out battery You're standing too far or on an exceeding angle from the front panel Worn-out or damaged fuse Remedy Push STBY button on the remote controller or any button on the front panel Make sure the power cord is correctly plugged into the wall outlet Check fuses in the fuse panel (after unplugging the power cord from the wall outlet) above the IEC inlet and replace them with new ones of the same type Check cords and their connection Check that Rossini CD Player is correctly selected through the amplifier inputs Contact your Audio Analogue retailer for connections check and front panel substitution Place/replace battery (2 `AAA' batteries) Get closer to the unit or reduce angle Remote controller doesn't work The unit is on but there is no sound Contact your Audio Analogue retailer for fuse check and substitution If the suggested remedies should not work or the problem is not shown in the list above, please contact your local Audio Analogue retailer. All of our CD players may not be able to read some specific CD's manufactured with a unique protection system against copying. [. . . ]