User manual BALAY 3ET738P

[. . . ] Only after read ing these will you be able to operate the appliance correctly. If the appliance is passed to another per son, please enclose the instructions. Before switching on your appliance Transport damage Check your appliance after removing the packaging. If it has suffered any damage during transport, do not connect the appliance but contact the Technical Services department. Before using the appliance for the first time, you must ensure that the domestic electrical system is earthed and meets all the current safety regulations. [. . . ] Switch down to a lower heat setting in good time. Cooking with small quantities of water Lowering the heat setting 16 Timer function This function can be used in two different ways: - to switch a hotplate off automatically - as a cooking timer A hotplate is to switch off automatically Setting procedure All hotplates dispose of this function. When the cooking time has elapsed, the hotplate switches off automatically. 1. Set the heat setting on the hotplate which is to be operated with the timer function. 2. If you select a different hotplate, touch the - and + symbols of the timer function repeatedly and at the same time until the 1 indicator for the required hotplate flashes. 3. For +: 30 minutes For -: 10 minutes The 1 indicator for the hotplate flashes again. 4. Touch the - or + symbol until the desired cooking time appears in the timer indicator. If you have set a cooking time for several hotplates, it is always the shortest cooking time that is displayed. The 1 hotplate indicators light up. 17 When the cooking time has elapsed When the cooking time has ended, the hotplate switches off. Touch the - and + symbols repeatedly and at the same time until the required 1 indicator flashes. If you would like to call up the remaining cooking time for a hotplate: Touch the - and + symbols repeatedly and at the same time until the 1 indicator for the relevant hotplate flashes. The timer function is no longer active after a power cut. Changing prematurely Cancelling prematurely Notes Cooking timer You can use the timer on your cooker to set a time of up to 99 minutes. Touch the - and + symbols repeatedly and at the same time until the a indicator for the cooking timer flashes. Set the time using the - and + symbols. The time disappears after a few seconds. The shortest time set with the timer is displayed. 18 When the cooking time has elapsed A signal sounds when the cooking time has elapsed. Touch the - and + symbols repeatedly and at the same time until the a indicator for the cooking timer flashes. The cooking timer is no longer in operation after a power cut. When the cooking time has elapsed Changing the time Note Memory function You can use the memory function to store the heat settings and times for one meal which can be called up again at any time. It is sensible to use the memory function if you require several different heat settings in order to prepare a meal, and if there is a meal which you cook particularly often. The conditions must always be the same as when you stored the settings when preparing the dish, e. g. : the same pan, the same quantity and the same initial temperature of the dish. 19 Storing the setting This function can be used in the hotplate 4. The maximum cooking time that can be recorded is 99 minutes. 1. Method 2. 3. 1. The hob must be switched on. Touch the symbol for at least 2 seconds. Select the hotplate using the + or - symbol and set the heat setting. When your meal is ready, switch off the hotplate. The cooking event is stored. Notes If you set more than 5 heat settings for your dish, flashes in the timer indicator and flashes in the hotplate indicator. [. . . ] Neither lemon juice nor vinegar should be used for cleaning the hob surround. This could result in matt patches. 26 Procedure in the event of a malfunction Malfunctions often have simple explanations and may be easily rectified. Please read the following instructions before calling the after sales service. The hob does not work Check whether there is a power supply to the appliance. [. . . ]