User manual BECKER 7820 TRAFFIC PRO HS UPDATECD1 3

[. . . ] All digitised roads of the southern countries are also included on the Southern Europe CD. In these detailed areas of the Northern or Southern Europe CD road map, motorways, regional roads and unclassified roads as well as country roads are stored. For smaller towns and communities, the regional and unclassified roads or access roads and the town centres are included. [. . . ] In some cases, the speed limit indicated by the navigation system may be incorrect. At all times, the driver must decide whether or not to heed the speed limit indicated. We do not accept liability for erroneous data provided by the navigation system. !"! T The distance to the next point at which for example a turn should be made is displayed below the navigation arrow, which appears in reduced format. On routes with variable speed limits (dependent on weather conditions, time of day etc. ) a symbol with the text @5Y or a speed with an underscore (e. g. : "80") draws the driver's attention to the fact that the speed limit is variable. due to road works) are usually short-lived, these have not been included on the CD.  ! !! Set and confirm ! in the System Settings menu. F By pressing the right rotary control selection can be made between speed limits display or . Setting is confirmed and accepted by pressing and holding the right rotary control . Subject to errors and technical modifications 17 Copyright by Becker GmbH, D-76303 Karlsbad Navigation CD 3. X Dynamic navigation with TMC Note: Dynamic route guidance is not possible in all countries. To use dynamic navigation and the functions described below, TMC must be switched on, as described under "Switching TMC on/off" on page 22. When any route recalculations are made with active dynamic route guidance, the navigation system may request the Navigation CD (if the Navigation CD is not already inserted). Dynamic route guidance is used to calculate the route, taking current traffic announcements into account. The traffic announcements are transmitted by a TMC radio station in addition to the radio programme and are received and analysed by the navigation system. Note: Traffic announcements are transmitted by radio stations, therefore we cannot accept any responsibility for the completeness and correctness of the announcements Activating dynamic route guidance Dynamic route guidance can be started by selecting !!S&Y Y in the route menu. Austria: The location and event code was made available by ASFINAG and BMVIT. Note: Can only be selected if TMC has been switched on or is currently switched on. See "Switching TMC on/ off" on page 22. # !! D F F " Y If !!S&Y !!S !Y ), then & must be selected by entering the route settings. Y Y Subject to errors and technical modifications 18 Copyright by Becker GmbH, D-76303 Karlsbad Navigation CD 3. X Note: !"! Dynamic route guidance is started after confirmation of & "! [. . . ] This transmitter then corresponds to the traffic programme transmitter. If TMC is switched off, a traffic programme transmitter can be selected freely. Note: Dynamic navigation functions (dynamic route, traffic information) cannot be selected or called up. Using the right rotary control , select <;6:, 3, *; and press to confirm. [. . . ]