User manual BOSCH INDEGO S+ 500

[. . . ] Please read the safety instructions provided below before installing the Indego. Make yourself familiar with the controls and the proper use of the machine. Warning: Operate the isolator switch before working on or lifting the machine. Wait until all machine components have completely stopped before touching The blades continue to rotate after the machine is switched off, a rotating blade can cause injury. [. . . ] Please note that the runtimes will vary depending on the lawn complexity and number of objects within the lawn area. This achieves good mowing results, the battery charge will last longer and you avoid debris on the lawn. When the lawn area is mowed, the mower returns to the docking station. In the programmable "Schedule" mode, with the "Bosch AUTO" calendar function or with the Bosch "SmartMowing" functionality, the mower operates continuously for a set period of time. If the lawn area is mowed before the time period expires, the mower returns to the dock. To stop mowing prematurely, press the Stop button or send the mower back to the docking station pressing the confirm button . With Indego S+ 500 and M+ 700 you can send the mower back to the docking station, by pressing the "Dock" button on the free Bosch Smart Gardening App. energy saving mode The mower reduces its energy consumption by automatically switching off the power in the perimeter wire when it is not mowing and not being charged. To wake up the mower manually from the energy saving mode, press the confirm button and afterwards select either "Mow now" or another "Mowing mode", while the mower is in the docking station. With Indego S+ 500 and M+ 700 you can wake up the mower remotely from the energy saving mode, by pressing the "mow" button on the free Bosch Smart Gardening App. For mowing based on an active schedule or with the "Bosch AUTO" calendar function or with the Bosch "SmartMowing" functionality, the energy saving mode is automatically ended. Mowing small lawn areas with , , SpotMow" SpotMow is intended for mowing small areas that require special treatment without having to mow the whole lawn, such as the area under a piece of garden furniture that has been removed. The mower is positioned at the lower left corner of the intended area to mow (see figure H). The final mowed area depends on the lawn conditions; it will not necessarily be an exact square. After completion of , , SpotMow", follow the instructions on the screen. Note: For safety reasons, , , SpotMow" cannot be used outside the perimeter wire. sensors The mower is equipped with the following sensors: ­ The lift-up sensor is activated when the mower is lifted. The battery is equipped with temperature monitoring that allows charging only if the battery internal temperature is in the range between 5 °C and 45 °C. It is recommended to charge the mower during installation of the perimeter wire in the docking station. The lithium-ion battery can be charged at any time without reducing its service life. When the battery is run flat or discharged, the mower is shut off by means of a protective circuit: the blades no longer move. Replacing the Battery (see figure L) Note: The battery only needs to be replaced when it is exhausted. [. . . ] If the mower is requested to be sent to the service centre, the mower and docking station must always be sent together. Before sending in, remove any personalised top cover that may have been fitted and any accessory cover. Uk you can order spare parts or arrange the collection of a product in need of servicing or repair. The contained lithium-ion batteries are subject to the Dangerous Goods Legislation requirements. [. . . ]