User manual BOSCH MUM58231

[. . . ] Connect and operate the appliance only in accordance with the specifications on the rating plate. Do not use the appliance if the power cord and/or appliance are damaged. Before replacing accessories or additional parts, which move during operation, switch off the appliance and disconnect from the power supply. Always disconnect the appliance from the supply if it is left unattended and before assembling, disassembling or cleaning. [. . . ] If the appliance features an automatic cord winder, do not insert the cord manually. If the cord jams, pull out the cord all the way and then allow it to wind up. WWRisk of injury from the rotating tools While the appliance is operating, never place fingers in the mixing bowl. Do not change tools until the drive has come to a standstill ­ when the appliance is switched off, the drive continues running briefly and stops in the tool change position. For reasons of safety the appliance may only be operated when unused drives have been covered with drive guards (5, 8). Kneading hook (15) for kneading heavy dough and mixingin ingredients that ought not be cut (e. Depending on the processing task, insert the stirrer, whisk or kneading hook until it locks into position. Note: If using the kneading hook, rotate the dough deflector until the kneading hook can lock into position (Fig. Set the rotary switch to the desired First stir in at setting 1 (1), then select setting 7 (4) ­­ Whisk: setting 7 (4), mix in at setting 1 (1) ­­ Kneading hook: first stir in at setting 1 (1), knead at setting 3 (2) Adding more ingredients Switch off the appliance with the rotary switch. Add more ingredients through the feed After using the appliance Switch off the appliance with the rotary Take the tool out of the drive. WWRisk of injury Do not grip the sharp blades or edges of the cutting discs. Before attaching / removing the continuousfeed shredder, wait until the drive has come to a standstill and pull out the mains plug. Operate the continuous-feed shredder in the indicated operating position only. The built-in predetermined breaking point protects the drive of the appliance. If an overload occurs, the drive shaft of the continuous-feed shredder breaks. A new disc holder with drive shaft is available from customer service. Designation on the reversible slicing disc: "1" for the thick slicing side "3" for the thin slicing side warning!The reversible slicing disc is not suitable for slicing hard cheese, bread, rolls or chocolate. reversible shredding disc ­ coarse / fine For shredding vegetables, fruit and cheese, except for hard cheese (e. Designation on the reversible shredding disc: "2" for the coarse shredding side "4" for the fine shredding side The reversible shredding disc is not suitable for shredding nuts. grating disc ­ medium-fine For grating raw potatoes, hard cheese (e. The grating disc is not suitable for grating soft cheese and cheese slices. [. . . ] Eltekrok (15) for elting av tyngre deiger og for å blande inn ingredienser som ikke skal kuttes opp (f. Betegnelsen på vende-skjæreskiven: "1" for den tykke skjæresiden "3" for den tynne skjæresiden Betegnelsen på vende-raspeskiven: "2" for den grove raspesiden "4" for den fine raspesiden For kutting av ferskt kjøtt for biff tartar eller kjøttpudding. Fin for tilberedning av postei eller mousse, grov for stekepølser og bacon. For riving av rå poteter til "Rösti" og stekte potetkaker, for skjæring av frukt og grønnsaker i tykke skiver. [. . . ]