User manual BOSCH MUMS2TW00

[. . . ] Never immerse the appliance or the power cord in water or clean in the dishwasher. Never let the power cord come into contact with hot appliance parts or heat sources. Never let the power cord come into contact with sharp points or edges. Only attach and remove tools and accessories once the drive Has stopped and you have unplugged the appliance. [. . . ] Note: If the drive does not move, the correct parked position has already been reached. Before using for the first time 6Before using for the first time Prepare the appliance for use. Clean all parts that come into contact with food before using for the first time. Pull the power cable out to the re- To shorten the cable, push it into the cable storage compartment. Press the release button and move the swivel arm down until it engages in the vertical position. "Moving the drive to the parked position", Page 32 Press the tool into the main drive until it engages. Insert the kneading hook with the protective cap fitted in the main drive. Press the release button, raise the swivel arm slightly and hold in place. Lift the lid slightly at the front, slide fully onto the bowl and set down. Press the release button, raise the swivel arm slightly and hold in place. You can find out everything you need to know about processing food here. Keep hands, hair, clothing and Accessories once the drive has stopped and you have unplugged the appliance. Before changing tools or cleaning the appliance, switch off and disconnect it from the mains. Only use the tools when the bowl is inserted, the lid is fitted and the drive covers are in place. Switch on the appliance only if all preparations are complete and the swivel arm is engaged in the position described. Never leave the appliance switched on if the power supply is interrupted. The appliance will automatically start up again following the interruption in the power supply. Press the release button and push the swivel arm down until it en- Set the rotary switch to the required speed. A The drive slowly moves until the correct parked position is reached. Tips ¡ You can change the speed at any time during processing or interrupt processing. To add ingredients during processing, use the filling shaft in the To add large quantities, set the Wait until the appliance stops. A The drive slowly moves until the correct parked position is reached. [. . . ] Ställ upp apparaten med tillräckligt avstånd till väggen och till känsliga ytor och apparater. Avstånd till väggen och till känsliga ytor och apparater. Rue Picard 7, box 400, Picardstraat 7, box 400 1000 Bruxelles - Brussel Tel. Grand Union House, Old Wolverton Road, Wolverton Milton Keynes MK12 5PT To arrange an engineer visit, to order spare parts and accessories or for product advice please visit www. [. . . ]