User manual BOSCH PVQ695FC5E

[. . . ] Additional information on products, accessories, replacement parts and services can be found at www. The instruction and installation manual, as well as the appliance certificate, in a safe place for later use or for subsequent owners. If it has suffered any damage in transport, do not connect the appliance, contact the Technical Assistance Service and provide written notification of the damage caused, otherwise you will lose your right to any type of compensation. This appliance must be installed according to the installation instructions included. [. . . ] the kitchen timer You can use the kitchen timer to set a time of up to 99 minutes. This functions independently from the hotplates and from other settings. Changing or deleting the time Touch the 0 symbol repeatedly until the V indicator lights up. Change the time in the settings area or set << in order to delete the programmed time. When the 0 symbol is touched, the displays go out and the audible signal ceases. The PowerBostfunction PowerBoost function enables you to heat up large quantities of water faster than when using heat setting S. This function can always be activated for a hotplate, provided the other hotplate in the same group is not in use (see illustration). Otherwise, > and S will flash in the display for the selected hotplate; the S heat setting will then be set automatically without activating the function. Note: In the Combi zone, the PowerBoost function can only be activated if the two cooking zones are used independently of each other. > goes out on the display and the hotplate switches back to the S heat setting. Note: In certain circumstances, the PowerBoost function can switch itself off automatically in order to protect the electronic elements inside the hob. This FryingSensor function can be used to fry food while maintaining the suitable frying pan temperature. The cooking zones that have this function are identified by the roasting function symbol. advantages when frying The hotplate only heats up if this is required to maintain the temperature. The frying function reports when the empty frying pan has reached the optimum temperature for adding oil and then for adding the food. If butter, margarine, extra virgin olive oil or lard is used, set heat setting ~. Never leave a frying pan, with or without food, unattended when it is being heated. If the hotplate is a higher temperature than the cookware or vice versa, the frying sensor will not be activated correctly. frying pans for the frying sensor Frying pans specifically suited for use with the frying sensor are available. These optional accessories can be purchased from specialist retailers or through our technical after-sales service. These frying pans have a non-stick coating so that you can fry food with only a small amount of oil. Notes The roasting function was set especially for this type of frying pan. [. . . ] Solution Use other electrical devices to check whether a short-circuit has occurred in the power supply. Ensure that the device has been connected in accordance with the circuit diagram. If the fault cannot be eliminated, inform the technical after-sales service. Wait until the electronics have cooled down sufficiently and switch the hotplate on again. [. . . ]