User manual BREIL YM62

[. . . ] The alarm can be set to ring only once at the designated time within the coming 12 hours Crown : (1) normal position (2) first click (3) second click This watch is so designed that the time setting, the alarm hand adjustment and the chronograph hand position adjustment are all made with the crown at the second click position (2). Once the crown is pulled out to the second click, be sure to make all the adjustments at the same time. Unscrew the crown and pu it out to the second click when the small second hand is at the 12 o'clock position. It is recommended that the hands be set to the time a few minutes ahead of the current time, taking into consideration the time required to adjust the chronograph hand position if necessary. [. . . ] While you keep button pressed to advance the alarm hands quickly, they stop when they indicate the current time and the alarm is disengaged. In this case, release button and then press and hold the button again to set the alarm hands to the desired time. When the crown is at the normal position, the alarm hands indicate the current time when the alarm is disengaged and the designated alarm time when it is engaged. Alarm hour hand Alarm minute hand [How to stop the alarm] At the designated time the alarm rings for 20 seconds and it is automatically disengaged as it stops. While the chronograph is measuring, the alarm rings differently than usual. While the alarm is ringing, pressing button or will only stop the alarm and no chronograph operation can be made. Press and hold button until the alarm hands stop and indicate the current time. By knowing how many seconds the vehicle to travel one kilometre, the tachymeter can measure the approximate average speed in km/h during a journey (over a maxinum measurable time of 60 seconds). If the chronograph is started at the same time as the start of the distance measurement, and stopped after 1km, the average speed can be calculated from the position of the second hand. If the vehicle covers the distance one km in 45 seconds, the approximate average speed is 80 km/h. The Telemeter is a distance indicator which allows distance to be calculated on the basis of the speed of sound. It is useful, therefore, for aviation, navy, army and artillery purposes. The hand is started the second a flash, smoke or lightning is seen and stopped when the actual sound is heard. The distance, from 1 to 20 kilometres, between the observer and the explosion or storm is read from the telemetry scale. - In order to prevent water coming into contact with the internal mechanism, never pull the crown out when the watch is wet. - If any watches designed for sportswear or use in water come into contact with salt water or heavy sweating, they should be rinsed in fresh water and dried thoroughly. During daily use Can be worn while swimming but not diving Suitable for skin-diving. - Contact with water may cause a deterioration in the quality of some leather straps. - As internal parts of the watch can retain moisture, when the outside temperature is lower than the inside, the watch glass may mist-up. This phenomenon is purely temporary and should not create any problems. [. . . ] Keeping the watch clean Use an absorbent soft cloth to clean off any dirt or damp from the watch glass. Wearing the watch when the strap or back of the case is dirty can cause skin irritation. cleaning the watch strap: · Metal bands: use a toothbrush and soapy warm to wash the dirt off. Leather straps: gently rub the face of the strap using a soft dry cloth. [. . . ]