User manual BRITAX AFFINITY

[. . . ] This product is not suitable: • As a substitute for a bed or cot. € As a travel system in combination with infant carriers other than the ones mentioned in this user guide. When carrying the stroller, make sure you do not open the safety locks by mistake. When folding the stroller frame, make sure you and others do not get trapped. [. . . ] When folding and unfolding the product, always ensure that the brake is engaged all locks are properly engaged. Open the fold lock and pull the pushchair up with each hand holding onto one side of the stroller. Ensure that the chassis is properly installed and that the central hinge has safely locked into place with an audible click noise. When engaging the brake always ensure that you test it by carefully pushing the pushchair with both hands still on the handle bar. Attaching and removing the seat unit, infant carrier and Britax affinity carrycot with the Click & Go® Adapters WARNING!For attaching the carrycot and infant carriers, please ensure that you follow their user instructions. The Britax affinity uses the innovative Click & Go® attachment system. The Britax affinity seat unit, carrycot and Britax Römer infant carriers use the same adapter system to be attached to the Britax affinity chassis. 14 How to attach/release To attach, just place the Click & Go® adapters over the chassis sockets and push the seat unit into the socket. Always ensure that your seat unit Click & Go® adapter is fully connected before using the pushchair!To release, use both hands to pull the left and right trigger of the Click & Go® adapter on your seat unit upwards and pull the seat unit away from the chassis. How to attach/release To attach, just place the Click & Go® adapters over the chassis sockets and push the seat unit into the socket. Always ensure that your carrycot Click & Go® adapter is fully connected before using the pushchair!To release, use both hands to pull the left and right trigger of the Click & Go® adapter on your carrycot upwards and pull the carrycot away from the chassis. When adjusting the seat angle, always ensure that the recline locking mechanism has properly locked in before using the pushchair. The angle of the seat can be adjusted with the seat forward or rearward facing on the chassis. Harness height adjustment The harness can be adjusted to two different heights. Always ensure that the correct height for the occupying child is adjusted. To adjust the harness height ensure that the buckle is open and that the waist strap tongue is disconnected from the shoulder strap tongue. Also ensure that the button connecting the shoulder pads to the harness are opened. Ensure that the harness retainer is turned 90 degrees again so that it properly retains the harness as shown in the image. Ensure to install the shoulder pads again properly including the button to secure them to the harness. [. . . ] Rear wheel quick release To release the rear wheels press the button as shown in the image and pull out the wheel at the same time. You can find this tag and number on the rear cross bar between the wheels on a special label titled “THEFT PROTECTION”. Com identifies products with the help of an online based product coding system, protects against theft and reunites people with lost property. By activating the CODE number of your Britax affinity pushchair on the internet portal CODE-No. [. . . ]