User manual BRITAX BABY-SAFE BELTED BASE

[. . . ] An airbag hitting the infant carrier can cause serious injuries to your child, possibly resulting in death. 3) Please observe the instructions in your vehicle manual for the use of child seats. 1 With the vehicle's 3-point seatbelt and support leg (semi-universal) Fastening with the BABY-SAFE Belted Base is based on semi-universal approval. The seat may be used only in those vehicles cited in the enclosed vehicle type list. [. . . ] Tensioning the vehicle seat belt Pull on the diagonal belt section 12 to tension the entire vehicle seat belt. Push the clamping flap 37 down until it engages into the two safety hooks 39. The buckle 9 of the vehicle seat belt must not be positioned in the light blue belt guide 34. Always retension the vehicle seat belt if the adapter 33 has worked loose after prolonged use. Adjusting the support leg Push the adjustment button 40 and pull out the support leg 36 until it rests firmly on the floor of the vehicle. The support leg 36 must never be suspended in mid-air or supported by other objects. Also ensure that the support leg 36 does not raise the adapter 33 from the seat surface. 23 Engaging the baby seat Ensure that the top side of the adapter 33 is free of foreign bodies. Lift the baby seat over the adapter 33 against the direction of travel (baby facing backwards). 2 Removal Press the grey release button 41, tilting the baby seat slightly forwards so that the locking bar X disengages from the foot end. For day-to-day use, you can leave the adapter 33 installed in your vehicle. Always retension the vehicle seat belt if the adapter 33 has worked loose after prolonged use. 27 Removing the adapter Push the light grey handle of the clamping flap 37 slightly downwards. Push back one of the two light grey safety hooks 39 until the clamping flap 37 unhooks. Undo the vehicle seat belt buckle 9 and take the seat belt from the light blue belt guides 34. On the inside of the shock bar 35 joint, push the two metal pins 43 and pull the shock bar 35 slightly upwards. 3 Fitting your baby seat with the BABY-SAFE Belted Base correctly For your baby's safety, check that. € The lap belt section 10 and the diagonal belt section 12 run through the two light blue belt guides 34. 31 • The support leg 36 rests firmly on the floor of the vehicle, and the green mark on the support leg foot 42 is visible. The support leg 36 must not raise the adapter 33 from the seat surface. [. . . ] Buckle: Buckle malfunction is often due to accumulations of dirt and dust which may stop it from working properly. Please contact your retailer directly in the event of a warranty claim. when processing claims , product-specific depreciation rates will be applied. Please refer to our General Terms and Conditions which are available from your retailer. [. . . ]