User manual BROTHER HL-2400C

[. . . ] Brother Color Laser Printer HL-2400C series USER'S GUIDE i USER'S GUIDE Trademarks Brother is a registered trademark of Brother Industries, Ltd. Apple and LaserWriter are registered trademarks, and TrueType is a trademark of Apple Computer, Inc. EPSON is a registered trademark, and FX-850 and FX-80 are trademarks of Seiko Epson Corporation. Hewlett-Packard, HP, PCL5C and PCL are registered trademarks, and HP LaserJet 4+, HP LaserJet Plus, HP LaserJet II, HP LaserJet IID, HP LaserJet IIID, HP-GL, HP-GL/2, and Bi-Tronics are trademarks of Hewlett-Packard Company. [. . . ] To change them, you need to first unlock the panel buttons. 4­41 USER'S GUIDE To lock or unlock the panel buttons as above, you need to enter a 3-digit pass number. Change the first digit of the number with the v or w button and move to the next digit with the Set button. After you finish entering your 3-digit pass number, the panel buttons are locked or unlocked. Note Do not forget your pass number that you have used to lock the panel buttons. The display shows the following message: INCORRECT!! s Auto Form Feed If unprinted data remains in the printer's memory, the Data LED stays on. The auto form feed mode you can set in this menu allows you to print out the remaining data without pressing the Form Feed button. You can turn on or off the auto form feed in this mode menu as follows: Display Message Auto Form Feed Turn off the auto form feed. You need to press the Form Feed button every time data remains in the printer's memory. Every time data remains in the printer's memory, an auto form feed takes place after the wait time set as below. AUTO FF=OFF AUTO FF=ON When you turn on the auto form feed as above, you need to set the wait time in the following sub-setting menu: Display Message Wait Time Set the wait time for the auto form feed. The printer automatically prints out the remaining data after the set wait time. WAIT TIME=99s 4­42 CHAPTER 4 CONTROL PANEL s Form Feed Suppress You can turn on or off the form feed suppress function in this mode menu as follows: Display Message Form Feed Suppress Turn off the form feed suppress function. (Factory setting) Turn on the form feed suppress function. FF SUPPRESS=OFF FF SUPPRESS=ON If pages contain no print data, the printer would normally print blank pages. When you turn this function on, you can suppress printing blank pages. When the printer is used in a network environment, it may deliberately print a blank page at the end of each print job. When you turn on this function, the printer does not print blank pages. ERROR PRINT Note The setting in this mode menu is effective only in the BR-Script 2 mode. Display Message Error Mode Turn on the error print so that the printer prints an error if it occurs. Turn off the error print so that the printer does not print an error if it occurs. (Factory setting) ERROR PRINT=ON ERROR PRINT=OFF 4­43 USER'S GUIDE CONTINUE MODE If any recoverable error occurs including "Toner Empty, " it can be cleared with the Continue button. Display Message Continue Mode Select the manual or auto error recovery mode. You need not press the Continue button. CONTINUE=MANUAL CONTINUE=AUTO SCALABLE FONT Note The setting in this mode menu is effective only in the HP PCL5C mode. Since this printer has many scalable fonts, some application programs may not be able to handle them correctly. [. . . ] ", " (space)", "$", " / ", "+", and "%" can be accepted as bar code data. The bar code data automatically starts and ends with an asterisk " * " (start character and stop character). If the received data has an asterisk " * " at its beginning or end, the asterisk is regarded as a start character or stop character. · When Interleaved 2 of 5 is selected with the parameter "t1" or "T1": Ten numerical characters "0" to "9" can be accepted as bar code data. [. . . ]