User manual BROTHER INNOV-IS 1500 BROCHURE

[. . . ] IMPORTANT SAFETY INSTRUCTIONS When using this machine, basic safety precautions should always be taken, including the following: Read all instructions before using. DANGER - To reduce the risk of electric shock: 1. Always unplug the machine from the electrical outlet immediately after using and before cleaning. To reduce the risk of burns, fire, electric shock, or injury to persons: WARNING 1. Close attention is necessary when the machine is used by or near children. [. . . ] to return to If the pattern is bunched together: Press in the FINE ADJUST VERTI. Each press of the key increases the value and lengthens the pattern. 4 Character/Decorative Stitches If the pattern is stretched: Press in the FINE ADJUST VERTI. Each press of the key decreases the value and shortens the pattern. If the pattern is skewed to the left: Press in the FINE ADJUST HORIZ. Each press of the key increases the value and moves the pattern to the right. If the pattern is skewed to the right: Press in the FINE ADJUST HORIZ. Each press of the key decreases the value and moves the pattern to the left. 93 EDITING STITCH PATTERNS EDITING STITCH PATTERNS Using the editing functions, you can change the patterns in a variety of ways, such as resizing them or flipping them to create a mirror image. Memo Depending on the pattern that is selected, some editing functions may not be available. ab g f e c d j h i l k m n Key Functions No. a Key Name Screen lock key Function Press this key to lock the screen. When the screen is locked, the various settings, such as the stitch width and stitch length, are locked and cannot be changed. Press this key to check an image of the selected patterns (characters). Page 45 b c Image check key 89, 90 43 Automatic Press this key to select the automatic reinforcement stitching setting. If you select reinforcement stitch key this setting before sewing, the machine will automatically sew reinforcement stitches at the beginning and end of stitching. Automatic thread cutting key Press this key to select the automatic thread cutting setting. If you select this setting before sewing, the machine will automatically cut the thread at the end of stitching. Press this key again to cancel the setting. d 44 e f g Horizontal mirror image Press this key to create a horizontal mirror image of the selected stitch pattern. key Vertical mirror image key Press this key to create a vertical mirror image of the selected stitch pattern. 95 95 31 Needle mode selection Press this key to select the setting for twin needle sewing. Each time this key is key (single/twin) pressed, the setting switches between that for single needle sewing and for twin needle sewing. Elongation key Single/repeat sewing key Stitch settings key Delete key If a 7 mm satin stitch pattern is selected, press this key to select from five settings for changing the pattern length without changing the zigzag width or stitch length. Press this key to switch between sewing the pattern a single time or repeatedly. Press this key to change the stitch width, stitch length and thread tension for the selected pattern. If the wrong pattern was accidentally selected, press this key to erase it. If patterns have been combined, each press of this key erases the last pattern in the combination. Press this key after selecting a pattern to change the size of the pattern (large or small). Press this key after selecting a pattern to change the stitching density of the pattern. h i j k 95 96 42 89, 90 l m n Memory key Size key Thread density key 103 95 96 94 EDITING STITCH PATTERNS Changing the Pattern Size After selecting a stitch pattern, press desired size is selected. until the Creating a Vertical Mirror Image After selecting a stitch pattern, press pattern vertically. to flip the Memo · Stitch patterns entered after the pattern size was changed are added at the selected size until it is changed again. [. . . ] 52 needle position button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 needle threader lever . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 30 O operation buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 11 options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]