User manual BROTHER PT-30

[. . . ] Although this machine is easy to use, we suggest that you read this manual carefully before starting. FCC NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] If the tape is cut without being fed, a label like that shown in the illustration below is produced. 1" (24mm) q When "printed. If 1" (24mm) " is set, the tape is not automatically fed after the label is CODE + SPACE FEED is pressed to feed the tape and the tape is cut, a label like that shown in the illustration below is produced. 1" (24mm) q When "# " is set, 4mm of the tape is automatically fed after the label is printed. If CODE + SPACE FEED is pressed to feed the tape and the tape is cut, a label like that shown in the illustration below is produced. Please cut the tape on the ":" mark with scissors. 1" 1/6" (24mm) (4mm) 1/6" (4mm) -40- If the tape is cut at the cutline, the text is centered in the middle of the label. The tape is automatically fed 1/3"(8mm) when "## " is set, and 1/2"(12mm) when "### " is set. q Continuous printing When "# " is set and three labels are printed continuously, the tape is fed and a label like that shown in the illustration below is produced. If "## " or "### " is set, the labels are printed with the appropriate margin widths. Repeat printing (See page 34. ) 1" 1/6" (24mm) (4mm) 1/6"1/6" (4mm)(4mm) 1/6"1/6" (4mm)(4mm) 1/6" (4mm) 2. Numbering (See page 35. ) q Printing with different styles When "- " is set, different styles can be used to print one label since the tape is not fed after a label is printed, different characters can be entered and the style can be changed. If the new label is printed, it will continue printing from the point where the first label stopped. After the whole label is printed, feed and cut the tape. -41- PHRASE MEMORY OPERATION PHRASE MEMORY You can use the Phrase Memory function to store your most frequently used messages. The stored message appears on the display, along with its area number. A A A AA 1:J. CAPS STL UNDL/FRM To alter recalled memory: q Press SET . The message is moved to the working area and remains on the display. A A A AA J. SM CAPS STL UNDL/FRM ITH q You can see the current printing information on the display for STL, UNDL/FRM and the SIZE and BIG size settings. q You can check the style (UNDL/FRM) by pressing the UNDL/FRM # 3 CODE + (UNDL/FRM). q Now you can print or edit the message. SET Note: Before you press CLEAR DEL you can cancel recall by pressing . -45- DELETING THE PHRASE MEMORY To delete an area of PHRASE MEMORY: (1) Hold down the CODE key and press the M. DEL key. The following message appears on the display: A A A AA 1-9? CAPS STL UNDL/FRM (2) Select the number key (1-9) of the memory area you want to delete, and press it. The key number and the beginning of the message appear on the display. If you accidentally selected the wrong number, you can press another number key (1-9) to display the correct phrase. (4) The Phrase Memory area is cleared and the message previously in the working area reappears on the display. Example To delete "J. SMITH" from the Phrase Memory: q Press play: A A CODE + M. DEL ( 9 . The following guidance appears on the dis- A AA 1-9? CAPS STL UNDL/FRM -46- To delete Phrase Memory q Press 1. The stored message appears on the display. A A A AA 1:J. CAPS STL UNDL/FRM q Press SET . The message previously in the working area (in this case, the same "J. [. . . ] El indicador de cinta no aparecerá cuando haya ajustado "-", "#", "##", ni "###". Cuando haya ajustado "-", "#", "##", o "###", pulse SPACE FEED CODE q + para alimentar la cinta después de que se haya impreso la etiqueta y antes de cortar la cinta. Si no alimenta la cinta antes de cortarla, es posible que se corten algunos de los caracteres impresos. -18- OPERACION DE LA MEMORIA DE FRASES MEMORIA DE FRASES Usted podrá utilizar la función de memoria de frases para almacenar sus mensajes utilizados con más frecuencia. Estos mensajes no se borrarán con la operación de borrado normal de mensajes (CODE + CLEAR). [. . . ]