User manual BROTHER PT-580C

[. . . ] Your new P-touch will allow you to design and print labels and stamps for any use. Your labels and stamps can contain characters of many sizes and styles as well as bar codes and graphics imported from other Windows applications. In addition, by using the variety of tape and ink cartridges available, you can print labels with different widths and exciting colors. You no longer have to worry about urgent tasks that require professional printing. [. . . ] ·Align the end of the tape with the edge of the cassette, then try using the multi-color printing function again. Press the CODE and 6 keys to skip colors and return to the point where printing stopped. ·Move the cursor or delete the bar code field before entering the character, symbol, return or new block. ·Move the cursor or delete the bar code field before pressing the text format key. CAN'T HERE ·This message appears if a character, symbol, return or new block is entered while the cursor is located in a bar code field. ·This message appears if the cursor is located in a bar code field and a text format (font, size width, style, underlining and framing, or color) key is pressed. ·This message appears if a text file is recalled and joined to the current massage while the cursor is located in a bar code field. ·This message appears in any mode when the tape compartment cover is open. ·Move the cursor or delete the field before recalling the text files. CHANGE ADAPTOR CLOSE THE COVER! ·Remove the high-voltage adaptor and install the optional 7. 0V 1. 2A AC adaptor. ·Close the compartment cover. 120 ERROR MESSAGE CUT NOW CAUSE ·This message appears after a label has been printed with the Cut pause mode on or before multi-color printing if the end of the tape is incorrectly positioned. ·This message appears when the tape has been cut, but it not removed. ·This message appears if you try printing in Interface mode without installing the correct tape cassette. This message appears if you try to underline or frame more then 25 characters. ·This message appears if the RETURN key is pressed when a TITLE font is selected. ·This message appears if a 1/4" (6-mm)- or 3/8" (9-mm)- wide tape is installed when text is entered using a TITLE font. ·This message appears if the character size is changed when a TITLE font is selected. ·This message appears when the CODABAR protocol is used in Bar code mode, but a letter between A and B has not been entered at the beginning and end of the bar code. ·In Bar code mode, the number of digits required for a code can sometimes be set. This message appears if the set number of digits are not entered while inputting the bar code data. REMEDY ·Press the tape cutter lever to cut the tape. EJECT CUT TAPE & PRESS RETURN ERROR! ·Remove the cut excess tape and press RETURN key. ·Press any key other then tape CODE, SHIFT, ALT or CAPS keys, then install the correct tape cassette. ·Reduce the number of characters that are underlined or framed. ERROR!UL/FRM FIXED SIZE! ·Change the font. ·Insert a tape cassette that is wide enough for TITLE font text to be printed on it. ·Enter a letter between A and D at the beginning and end of the bar code. INPUT ABCD AT BEING & END INPUT WHOLE CODE ·Input the correct number of digits or change the number of digits set in the bar code parameters. 121 ERROR MESSAGE INSTALL COLOR TAPE! CAUSE ·This message appears if a multi-color cassette is not installed while assigning the color settings or during multicolor printing. ·This message appears if a error occurs while data is being transmitted from the computer to this unit in interface mode. [. . . ] ·Este mensaje aparecerá si intenta imprimir una etiqueta o hacer avanzar la cinta cuando no haya cassette de cinta instalado. ·Deje de intentar almacenar el mensaje o borre un archivo innecesario a fin de dejar espacio para el nuevo. ·No intente invocar ni borrar un archivo de texto. ·Instale un cassette de cinta y vuelva a intentarlo. 42 MENSAJE DE ERROR NUMBERING BUFFER FULL CAUSA ·Este mensaje aparecerá si pulsa la tecla RETURN en el modo de numeración cuando la memoria intermedia del área de trabajo esté llena. ·Este mensaje aparecerá cuando se cierre la cubierta del compartimiento de la cinta mientras se rebobina la cinta durante la impresión en colores múltiples. ·Este mensaje aparecerá cuando haya algún problema con la memoria de acceso aleatorio de la máquina. ·Este mensaje aparecerá cuando las pilas alcalinas instaladas estén a punto de agotarse agotadas. [. . . ]