User manual BT CALLER DISPLAY 2000
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual BT CALLER DISPLAY 2000. We hope that this BT CALLER DISPLAY 2000 user guide will be useful to you.
Manual abstract: user guide BT CALLER DISPLAY 2000
Detailed instructions for use are in the User's Guide.
[. . . ] For instructions see page 8.
Installing your Caller Display 2000
2
Telephone line socket Associated 3 phone
1 Mains 4 Outside temperature gauge
Check your telephone wall socket
Insert back-up batteries
If you do not have a modern-style socket, call Freefone 0800 800 150 and ask for a BT engineer to come and fit the correct socket. This is a chargeable service.
Open the battery compartment at the back of your Caller Display 2000 by removing the screw and pushing the cover upward from the bottom edge.
Insert 4xAAA alkaline batteries (not included) as shown in the compartment, then replace the cover.
Please note
If the mains power is cut off, the batteries will not power the screen's backlight.
6
It is important to maintain the batteries in your Caller Display 2000 as information in the Calls List and Directory will be lost if a power failure occurs and you do not have back up batteries or if the batteries are flat.
Battery low indicator
BT's Caller Display and Call Waiting Services
Caller Display and Call Waiting services. For information, call: Freefone 0800 800 150 for residential customers. Freefone 0800 800 152 for business customers.
Information displayed via other UK networks
When the batteries are nearing the end of their useful life, the display shows the battery low symbol in lower right hand corner. [. . . ] The list is deleted.
Please note
or
Down
2
Press the DIAL button.
Dial
Press the CLEAR button again and the number is deleted.
If you do not wish to delete once DELETE?is shown, press any button other than CLEAR.
Display shows PICKUP PHONE
3
Lift the handset of any connected telephone. Wait tobe connected.
11
Text messages
WITHHELD The caller has stopped their number from being sent. RINGBACK* The telephone number you set on Ringback is now free to receive your call.
With some incoming calls, the telephone number of the caller is not available and cannot therefore be displayed. In this case, your Caller Display 2000 provides you with some explanatory information about the type of call you have received. This comes in the form of a text message and will be one of the following:
BT Network generated
If you continually receive NO NUMBER messages, call BT free on Freefone 0800 800 150 for residential customers or Freefone 0800 800 152 for business customers or your network service provider.
REPT
Other Network operators may use other text messages. NO NUMBER If your Caller Display 2000 does not recognise the information contained within the caller display message, it will show NO NUMBER rather than risk leaving a message with a possible mistake. It does not mean that there is a fault with your Caller Display 2000.
Repeat will be displayed if a call from the same number has been received earlier. It will be shown as an icon at the bottom right hand corner of the screen.
*Some text messages may have numbers associated with them. Your Caller Display 2000 will alternate between the phone number and the time and date of call every five seconds.
INTERNATIONAL International Call received was from outside the UK. UNAVAILABLE The caller's exchange/ network/switchboard does not offer a Caller Display Service.
12
Call Waiting
Call Waiting lets you know when someone else is trying to get through, even when you're already on the phone. Your Caller Display 2000 displays the Call Waiting icon The calls list will identify a Call Waiting call by displaying the Call Waiting icon.
To use call waiting
2
Press the RECALL button to switch between the two callers. If one caller hangs up, you are automatically connected to the remaining caller.
Please note
C/W
along with the number and/or text message. Providing you are using the phone attached to your Caller Display 2000, it will display the caller's details. You can switch between the two callers.
1
When the Call Waiting icon is displayed and you hear the beeps in the earpiece: Press the RECALL button on your telephone. Press and hold the DIAL and
DIRECTORY
Press the
DIRECTORY button.
The display shows the most recently viewed name and number in the list.
Directory
To enter another number and name, repeat steps 1-11.
To exit from the directory
buttons together until the display shows STORED. It then displays ENTER NAME.
Dial
2
Press the UP or DOWN buttons to display the number you wish to dial.
Up
or
Down
Press and hold the UP and DOWN buttons together.
Up
Directory
3 3
Down
Repeat steps 7-11 on page 14 to enter the name.
Press the DIAL button to dial the number displayed.
Dial
Display shows PICKUP PHONE.
4
Lift the handset on any connected telephone. Wait to be connected.
15
6
To edit a number and name in the directory
7 1
Repeat steps 4 and 5 until number is complete. Press DIRECTORY after the last digit to confirm the full phone number and the first letter of the name will flash. Press the UP or DOWN buttons to scroll through the letters until the first letter you want to store is flashing. Press the
DIRECTORY button to confirm the name.
Use a blank to remove any unwanted digits or letters.
4 2
To delete a number stored in the directory
Press the
DIRECTORY button.
Directory
1
Press the
DIRECTORY button. The display shows the most recently viewed name and number in the list.
Directory
8
2
Press the UP or DOWN buttons to display the entry you want to change. [. . . ] Even where the number of telephones has been limited there is no guarantee that different types of phone on the same line will ring, even when the REN is less than 4.
Clean with a soft cloth.
Although you may have any number of sockets, it is important to limit the number of phones and other items connected in order to ensure that each phone will ring.
20
You must not connect more than 4 Caller Display products to a single line.
Network connection information
Guarantee
If you own your Caller Display 2000 and it is under BT's guarantee: BT guarantees the product for one year, provided that: · The goods have only been used for their intended purpose, and have not been subjected to misuse or been wilfully or accidentally damaged. · The goods have not been tampered with or repaired by anyone other than BT, its staff or its agents. If a fault does occur, and you bought the unit yourself, it will be either repaired or replaced free of charge provided you return it to where you
purchased it and produce your receipt. The terms and conditions of this guarantee do not affect your statutory rights.
If you own your Caller Display 2000, but the guarantee period has expired:
Your Caller Display 2000 is designed to work with both BT and other UK networks, including cable. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE BT CALLER DISPLAY 2000
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual BT CALLER DISPLAY 2000 will begin.