User manual BUSHNELL TRAIL SCOUT 119833

[. . . ] Congratulations on your purchase of the Bushnell® Digital trail ScoutTM Camera!This trail camera is designed to record the activity of wildlife game in the outdoors with it's still image and movie modes and weatherproof, rugged construction. This instruction manual is designed to maximize your understanding of how the camera operates. Boasting one of the most user friendly interfaces in the industry, this trail camera has a positive toggle switch system that instantly tells you what your camera settings are--without fumbling with a confusing software interface! [. . . ] (b) STD (Standard) Mode: (Xenon flash tube) Note: this switch position may be labeled "Incand" rather than "STD" on some early production units. You can use Standard mode for twilight/cloudy conditions, or to take color still pictures at night. If you want to use the MOViE mode, you can not use Standard flash mode--you must set K3 to LED. K3 (Model 119833) ­ (24Hr / DAY/ NIGHT) MODE: K4 (Model 119935/119905)­ (24Hr / DAY / NIGHT) MODE: The trail Scout has three operating period modes: When the PiR (Passive infra Red sensor) senses a subject, the camera will take a photo and record an EVENt. (b) DAY: The trail camera only takes photos during the Daytime (user defined Day start~end period or default 6am~6pm). When the PiR senses a subject, the unit will take an image and record an EVENt. If the PiR is triggered between the Day end and Day start times, only an EVENt is recorded-an image is not taken. (c) NIGHT: The trail camera only takes photos during the Night (from user set Day end to Day start, or default 6pm~6am). When the PiR senses a subject the unit will take image and record an EVENt. If the PiR is triggered during "Day" time, only an EVENt is recorded, an image is not taken. K4 (Model 119833)­ (30s/1Min/2Min) CAMERA DELAY MODE K5 (Model 119935/119905) ­ (30s/1Min/2Min) CAMERA DELAY MODE: There are three modes for taking delayed pictures: 30 Sec, 1 Min and 2 Min. The unit will record EVENtS while CAMERA is in DELAY MODE each time the PiR senses motion. (a) 30s: After the first picture, a second picture will be taken 30 seconds later. (b) 1Min: After the first picture, a second picture will be taken 1 minute later. (c) 2Min: After the first picture, a second picture will be taken 2 minutes later. Requires infrared energy (heat) in addition to motion to trip sensor to assure detection of live animals. Image--A digital picture recorded on the SD Card when motion is sensed. Image Delay--time elapsed between photos while events are sensed and recorded. Especially useful for night photos when a visible flash is undesirable. (Featured on Models 119935/119905 only) Std (Standard) Flash--Xenon flash tube used for low light or night photography. Automatically fires if necessary due to dark, overcast skies or waning light late in the day. Compatible with up to 1GB capacity SD card (all new trail Scouts include a 128MB card). [. . . ] This warranty does not cover damages caused by misuse, improper handling, installation, or maintenance provided by someone other than a Bushnell Authorized Service Department. Any return made under this warranty must be accompanied by the items listed below: 1) A check/money order in the amount of $10. 00 to cover the cost of postage and handling 2) Name and address for product return 3) An explanation of the defect 4) Proof of Date Purchased 5) Product should be well packed in a sturdy outside shipping carton, to prevent damage in transit, with return postage prepaid to the address listed below: IN U. For products purchased outside the United States or Canada please contact your local dealer for applicable warranty information. [. . . ]