User manual BUSHNELL TROPHY CAM 119455

[. . . ] Congratulations on your purchase of one of the best trail cameras on the market!Bushnell is very proud of this little unit and we are sure you will be pleased with it as well. Please refer to the notes below and the instructions in this manual to ensure that you are completely satisfied with this product. If your Bushnell Trophy Cam does not seem to be functioning properly or if you are having photo/video quality issues, please check the Troubleshooting/FAQ section on pages 25-28. [. . . ] Press OK to execute (then select Yes and press OK again on color viewer models), press MENU (or select NO then press OK) to exit without formatting. Select "On" if you want the date & time (that the photo was captured) imprinted on every photo, select "Off" for no imprint. Press OK and use the UP/DOWN keys (to change the setting) and LEFT/RIGHT keys ( to move to the next field) to set the hour (24-hr format only, "00"=midnight, "12"=noon) and minute, and then (on the lower row), the year, month and date. If the camera is behaving oddly and you think you may have changed the setting for something accidently (but aren't sure which one), this will reset all parameters to their most commonly used or "generic" settings. Mounting After you've set up the camera's parameters to your personal preferences at home or in your truck, you're ready to take it outside and slide the power switch to "ON". When setting up the Trophy Cam for scouting game or other outdoor applications, you must be sure to mount it in place correctly and securely. We recommend mounting the Trophy Cam on a sturdy tree with a diameter of about 6 in. To get the optimal picture quality, the tree should be about 16-17 ft. (5 meters) away from the place to be monitored, with the camera placed at a height of 5-6. Also, keep in mind that you will get the best results at night when the subject is within the ideal flash range, no farther than 45' (14m) and no closer than 10' (3m) from the camera. There are two ways to mount the Trophy Cam: using the provided adjustable web belt, or the tripod socket. Push one end of the belt through the two brackets on the back of the Trophy Cam. Fasten the belt securely around the tree trunk by clicking the buckle ends together after tightening the belt so there is no slack left. Using the tripod socket: The camera is equipped with a socket at the bottom end to enable mounting on a tripod or other mounting accessories with a standard1/4-20 thread. Two optional mounting accessories, a "Bear Safe" metal camera box (model # 19653C) and Deluxe Tree Bracket (model# 119652C) are also available-please see your Bushnell dealer or website for more details. Sensing Angle and Distance Test To test whether the Trophy Cam can effectively monitor the area you choose, this test is recommended to check the sensing angle and monitoring distance of the Trophy Cam. Make movements in front of the camera at several positions within the area where you expect the game or subjects to be. If the motion indicator LED light blinks, it indicates that position can be sensed. The results of your testing will help you find the best placement when mounting and aiming the Trophy Cam. The height away from the ground for placing the device should vary with the animal size appropriately. You can avoid potential false triggers due to temperature and motion disturbances in front of the camera by not aiming it at a heat source or nearby tree branches or brush (especially on windy days). Switching ON the Camera Once you switch to the ON mode, the motion indicator LED (red) will blink for about 10 seconds. [. . . ] This is for setup purposes only and will help the user aim the camera. After moving the switch from "Off" to "Setup" or "On", make sure that the switch is correctly in position to ensure the proper mode (avoid positions "between" two modes). Do not move the switch directly from "On" to "Setup"-always move the switch all the way down to "Off" first, then back up to "Setup". LCD screen shows a faint black line after turning from "Setup" to "On". [. . . ]