User manual CARENA REMOTE-FLASH
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual CARENA REMOTE-FLASH. We hope that this CARENA REMOTE-FLASH user guide will be useful to you.
Manual abstract: user guide CARENA REMOTE-FLASH
Detailed instructions for use are in the User's Guide.
[. . . ] In accordance with FCC requirements, changes or modifications not expressly approved by Thomson Inc. This device generates and uses radio frequency (RF) energy, and if not installed and used properly, this equipment may cause interference to radio and television reception. If this equipment does cause interference to radio or television reception (which you can determine by unplugging the unit), try to correct the interference by one or more of the following measures: · Re-orient the receiving antenna (that is, the antenna for the radio or television that is "receiving" the interference). · Move the unit away from the equipment that is receiving interference. [. . . ] SURR (Surround Sound Control) Press to change the surround sound settings. The display will toggle among DOLBY DIGITAL, DOLBY PROLOGIC, DTS , STEREO. LED indicator Lights up whenever a key on the remote control is pressed.
11
Operating Your Receiver
Display
C
R
S
RS
L
C
R
LS
LFE
RS
· Audio output is in dts mode. · Speaker Icons.
· Audio output is in Dolby Digital mode.
SLEEP
· Unit in Sleep mode.
MEMORY
· Audio output is in Dolby Pro Logic mode. · Unit in Memory or Preset mode.
ST
· Tuner stereo signal detected.
KHz MHz
· Tuner frequency unit.
TUNED
· Tuner station detected.
EQ
· EQ effect activated.
12
Operating Your Receiver
Switching on/off
· To switch on the receiver, press ON/STANDBY button once, or any source button on the remote control.
Selection of Audio/Video source
When one of the source buttons is pressed, the audio and video input corresponding to the name will be activated. The receiver acts as a switching device between all the sources that are plugged into it.
EN
ON/STANDBY
SOURCE MUTE SOURCE FM/AM TUN
· Standby: when the receiver is on, press the ON/STANDBY button once to activate the standby mode. · To switch off the unit completely, unplug the power cord from the socket
Example 1: If you connect a DVD player to the DVD input (audio + video) on the receiver and press the DVD button, or press source button repeatedly until DVD is selected, you will be able to have the sound and image transmitted by the DVD.
SOURCE FM/AM SOURCE TUNIN
Example 2: Based on the example 1, the DVD is playing , if a VCR is connected to the VCR 1 input (audio + video) of the receiver, press the VCR button , or press source button repeatedly until VCR is selected, image and sound from the VCR source will replace the DVD.
SOURCE FM/AM SOURCE TU
13
Operating your Receiver
You can connect up to 7 audio/video sources to this amplifier: Source button Corresponding connector (receiver front panel) (receiver back panel) DVD SAT VCR V-AUX CD TV TAPE FM/AM DVD IN (audio / video) SAT IN (audio / video) VCR IN/OUT (audio / video) V-AUX IN (audio / video) CD IN (audio only) TV IN (audio only) TAPE IN/OUT (audio only) built-in
Using the Remote to Control Additional Components
You can set your remote to control other components (like CD, TV, DVD, TAPE, etc. ). What you need is to encode them in advance (not necessary for recent CARENA & Proscan models). Look up the brand and corresponding code number in the code list from page 23 to 25. Press and hold the corresponding Source Button (like VCR, TV, DVD) on the remote while entering the code from the code list using the Number Buttons.
When a source is selected, the source name will be shown on the display. Example: Press DVD to select DVD as the source to the amplifier.
NOTE
1. TV and other electronic devices could be the cause of interferences so try to position the antenna away from them. Select sound effect if needed by pressing Preset EQ or DSP sound (see "Advance sound section" for details).
MUTE
3. Press SOURCE keys to enter TUNER mode.
SOURCE FM/AM SOURCE TUNIN
4- To select band, press the FM/AM button to toggle between AM/FM mode.
Selecting Mono or Stereo Sound
SOURCE FM/AM SOURCE TUNING MEM
Press ST/MONO on the main unit or the DIGITAL button on the remote control to toggle between mono and stereo sound in FM tuner mode (when available).
SURR MODE SETUP TEST TONE EQ DIGITAL INPUT DSP MODE ST / MONO V BA
16
Operating your Receiver
Storing radio stations:
The receiver can store up to 40 radio stations in memory. You can enter every single radio station yourself or the receiver can store all available radio station automatically in an ascending order. Press and hold the MEMORY button on the front panel or MENU on the remote control. "MEMORY" will flash and a preset number will be displayed on the display.
EN
Automatic preset storing : (FM only)
1. Select the band by pressing FM/AM
TUNING
MEMORY OK
SOURCE FM/AM SOURCE TUNING MEMO
4. Press TUNING UP/DOWN, while MEMORY is still flashing to select the desired preset memory location. "MEMORY" will be displayed in red and will blink during the automatic storing process.
CE FM/AM CE TUNING MEMORY
SOURCE FM/AM SOURCE TUNING MEM
5. Press the MEMORY button on the front panel or the remote control to store frequency in selected preset location. Repeat steps 1-5 to store other frequencies.
Radio frequencies will be scanned and radio station stored automatically. [. . . ] · Pay any Authorized CARENA Audio Service Center for the new or, at our option, refurbished replacement parts required to repair your unit.
How you get service:
· Take your unit to any Authorized CARENA Audio Service Center. To identify your nearest Authorized CARENA Audio Service Center, ask your dealer, look in the Yellow Pages, or call 1-800-336-1900. · Show the Authorized Service Center Representative your evidence of purchase date or first rental. · Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the product is within the warranty period must be presented to obtain warranty service. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE CARENA REMOTE-FLASH
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual CARENA REMOTE-FLASH will begin.