User manual CATERPILLAR 336E L BROCHURE

[. . . ] [. . . ] The first model in the new family, the 336E, meets today's U. S. , European Union, and Japan emissions standards. It is also built with several new fuel-saving and comfort-enabling features and benefits that will delight owners and operators. If you are looking for more productivity and comfort, less fuel consumption and emissions, and easier and more sensible serviceability, you will find it in the all-new 336E and the E Series family of excavators. Contents Hydraulics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Operator Station. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Structures and Undercarriage . . . . . . . . . . . . . . . . . . . . . . . . . 6 Front Linkage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Work Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 . Please consult your Cat dealer for availability. 10 Serviceability Ground-LevelMaintenance Fast, easy and safe access built in The machine is designed to accommodate servicing most maintenance items from the safety and comfort of ground level. ServiceDoors Wider, lighter service doors feature sturdier hinges and latches and a new screen design to prevent debris entry; a new onepiece hood provides easier access to the engine and cooling compartments along with a new hood screen design to prevent debris entry. Compartments The radiator, pump, and air cleaner (1) compartments provide easy access to major components. When an air cleaner plugs, a warning is displayed on the monitor inside the cab. Also, the fresh air filter (2) is located on the side of the cab to make it easier to reach and replace as needed. OtherServiceImprovements The water separator with water level sensor has a primary fuel filter element located in the pump compartment near ground level; the electric priming pump is mounted on the primary filter base and is more reliable and easier to service than traditional handpriming pumps. The engine oil check gauge is situated in front of the engine compartment and is easy to remove. The engine oil filter is situated in the pump compartment for easy access. Changing engine oil is simple due to a drain cock designed to prevent spills. Front linkage pins feature a selflubricated bearing that only has to be greased every 500 hours. The fuel tank features a remote drain cock located in the pump compartment to make it easy to remove water and sediment during maintenance. The optional Fast Fill Fuel System and Fast Fill Engine Oil System make what typically takes hours achievable in minutes. 11 Safety Features to help protect people ReinforcedFrame The upper frame is reinforced to accommodate the installation of a new ROPS cab with redesigned overhead guarding to protect operators. SoundProofing Improved sealing and cab roof lining lower noise levels significantly during machine operation. Anti-SkidPlates The surface of the upper structure and the top of the storage box area are covered with removable antiskid plates to help prevent service personnel and operators from slipping during maintenance. Steps, HandandGuardRails Steps on the track frame (1) and storage box along with extended hand and guard rails to the upper deck enable operators to more securely work on the machine. HighIntensityDischarge(HID)Lights Cab lights can be upgraded to HID for greater nighttime visibility. Visibility­Windows Increased glass coverage improves visibility while meeting the latest ROPS regulations. The 70/30 split configuration features an upper window equipped with handles on the top and both sides so the operator can slide it to store in the ceiling. The lower window is removable and can be stored on the left wall of the cab shell. An available onepiece front windshield comes with a glassbreaking safety hammer. The newly designed skylight is larger than the previous series' skylight and provides greater overhead visibility, excellent natural lighting, and good ventilation. The skylight can be opened completely to become an emergency exit. MonitorWarningSystem The monitor is equipped with a buzzer that can warn an operator of critical events like "Engine Oil Pressure Decrease, " "Coolant Temperature High" or "Hydraulic Oil Temperature High, " allowing for immediate action to take place. RearviewCamera A rearview camera (2) housed in the counterweight area is available as an optional attachment. The image projects through the cab monitor to give the operator a clear picture of what's around the machine. 12 CompleteCustomerCare Service you can count on ProductSupport Cat dealers utilize a worldwide parts network to minimize machine downtime. Plus you can save money with Cat remanufactured components. MachineSelection Make detailed comparisons of machines you are considering. What are the job requirements and machine attachments? What production is needed? Your Cat dealer can provide recommendations. Purchase Consider financing options and daytoday operating costs. Look at dealer services that can be included in the machine's cost to yield lower owning and operating costs over time. CustomerSupportAgreements Cat dealers offer a variety of customer support agreements and work with you to develop a plan to meet specific needs. These plans can cover the entire machine, including attachments, to help protect your investment. Operation Improving operating techniques can boost your profits. Your Cat dealer has videos, literature, and other ideas to help you increase productivity. Caterpillar also offers simulators and certified operator training to help maximize the return on your investment. Replacement Repair, rebuild, or replace? Your Cat dealer can help you evaluate the cost involved so you can make the right choice. 13 Sustainability · · Generations ahead in every way The C9. 3 ACERT engine, along with the Cat Clean Emissions Module (CEM), meets U. S. EPA Tier 4 Interim, EU Stage IIIB, and Japan MLIT Step 4 emissions regulations. The 336E generates 11% more horsepower, moves 5% more material, and burns 2% less fuel than the D Series machine, which means more efficiency and productivity with less resource consumption and fewer CO2 emissions. The 336E has the flexibility of running on either ultralowsulphur diesel (ULSD) fuel with 15 ppm of sulphur or less or bio diesel (B20) fuel blended with ULSD. The 336E features a groundlevel overfill indicator that rises when the tank is full to help the operator avoid spilling. The 336E's quick fill ports with connectors ensure fast, easy, and secure changing of hydraulic oil. The 336E is built to be rebuilt with major structures and components remanufactured to reduce waste and replacement costs. The 336E is an efficient, productive machine that's designed to conserve our natural resources for generations ahead. · · · · · 14 336ELHydraulicExcavatorSpecifications Engine Engine Model Net Flywheel Power Net Power ­ ISO 14396 Net Power ­ SAE J1349 Gross Power ­ SAE J1995 Bore Stroke Displacement Cat® C9. 3 (ATAAC) 217 kW 291 hp 236 kW 316 hp 224 kW 241 kW 115 mm 149 mm 9. 3 L 300 hp 323 hp 4. 53 in 5. 87 in 568 in3 HydraulicSystem ServiceRefillCapacities Weights Minimum Weight* 36 570 kg 80, 620 lb Maximum Weight** 39 370 kg 86, 796 lb *HD Reach boom, R3. 2. DB (10. 5 ft) stick, 2. 28 m3 (2. 98 yd3) GP bucket, 700 mm (27. 6 in) TG shoes. ** S Reach boom, R3. 9DB ES (12 ft 6 in) E stick, 2. 28 m3 (2. 98 yd3) GP bucket, 850 mm (33. 5 in) TG shoes. Main System ­ 578 L/min 152. 69 gal/ Fuel Tank Capacity 620 L 163. 8 gal Maximum Flow min Cooling System 56 L 14. 8 gal (Total) Engine Oil 30. 5 L 8. 1 gal Swing System ­ 275 L/min 72. 65 gal/ (with filter) Maximum Flow min Swing Drive (each) 19 L 5 gal Maximum Pressure 35 000 kPa 5, 076 psi Final Drive (each) 8 L 2. 1 gal ­ Equipment Hydraulic System 380 L 100. 4 gal Maximum Pressure 35 000 kPa 5, 076 psi (including tank) ­ Travel Hydraulic Tank 175 L 46. 2 gal Maximum Pressure 28 000 kPa 4, 061 psi ­ Swing Track Pilot System ­ 26 L/min 6. 87 gal/ Maximum Flow min Number of Shoes (each side) Pilot System ­ 4100 kPa 595 psi Maximum Pressure Long Undercarriage 49 Boom Cylinder ­ 150 mm 5. 9 in Number of Track Rollers Bore (each side) Boom Cylinder ­ 1440 mm 56. 7 in Long Undercarriage 9 Stroke Number of Carrier Rollers Stick Cylinder ­ 170 mm 6. 7 in (each side) Bore Long Undercarriage 2 Stick Cylinder ­ 1738 mm 68. 4 in Stroke SoundPerformance DB Family Bucket 150 mm 5. 9 in Operator Noise SAE J1166 71 dB(A) Cylinder ­ Bore · When properly installed and maintained, the DB Family Bucket 1151 mm 45. 3 in cab offered by Caterpillar, when tested with Cylinder ­ Stroke doors and windows closed according to TB Family Bucket 160 mm 6. 3 in ANSI/SAE J1166, meets OSHA and MSHA Cylinder ­ Bore requirements for operator sound exposure TB Family Bucket 1356 mm 53. 4 in limits in effect at time of manufacture. Cylinder ­ Stroke · Hearing protection may be needed when operating with an open operator station Drive and cab (when not properly maintained or doors/windows open) for extended periods Maximum 4. 9 km/h 3 mph or in noisy environment. Travel Speed Maximum 295 kN 66, 319 lbf Standards Drawbar Pull Brakes ISO 10265 2008 SwingMechanism Cab/FOGS ISO 10262 1998 Swing Speed Swing Torque 9. 2 rpm 109 kN·m 80, 394 lb ft 15 336ELHydraulicExcavatorSpecifications Dimensions All dimensions are approximate. 2 3 1 9 10 7 8 6 4 5 ExtremeServiceand HeavyDutyReachBooms 6. 50m(21. 33ft) Stick R3. 9DB (12. 8ft) mm(ft) 3660 (12. 01) 3660 (12. 01) 11 170 (36. 65) 3500 (11. 48) 4040 (13. 25) 5020 (16. 47) 510 (1. 67) 480 (1. 57) 2590 (8. 50) 3290 (10. 79) 3390 (11. 12) 3440 (11. 29) 3360 (11. 02) 1220 (4. 00) 3360 (11. 02) R3. 2DB (10. 5ft) mm(ft) 3510 (11. 52) 3510 (11. 52) 11 160 (36. 61) 3500 (11. 48) 4040 (13. 25) 5020 (16. 47) 510 (1. 67) 480 (1. 57) 2590 (8. 50) 3290 (10. 79) 3390 (11. 12) 3440 (11. 29) 3360 (11. 02) 1220 (4. 00) 3360 (11. 02) MassBoom 6. 18m(20. 28ft) M2. 55TB (8. 37ft) mm(ft) 3600 (11. 81) 3510 (11. 52) 10 890 (35. 73) 3500 (11. 48) 4040 (13. 25) 5020 (16. 47) 510 (1. 67) 480 (1. 57) 2590 (8. 50) 3290 (10. 79) 3390 (11. 12) 3440 (11. 29) 3360 (11. 02) 1220 (4. 00) 3360 (11. 02) 1 Shipping Height (with Shoe Lug Height) Shipping Height with Top Guard 2 Shipping Length 3 Tail Swing Radius 4 Length to Center of Rollers Long Undercarriage 5 Track Length Long Undercarriage 6 Ground Clearance With Shoe Lug Height Without Shoe Lug Height 7 Track Gauge Long Undercarriage 8 Transport Width Long/Std N/C ­ 700 mm (27. 6 in) Shoes Long/Std N/C ­ 800 mm (31. 5 in) Shoes Long/Std N/C ­ 850 mm (33. 5 in) Shoes 9 Cab Height Cab Height with Top Guard 10 Counterweight Clearance (without Shoe Lug Height) 16 WorkingRanges All dimensions are approximate. 3 4 5 2 1 7 6 ExtremeServiceand HeavyDutyReachBooms 6. 50m(21. 33ft) Stick R3. 9DB (12. 8ft) mm(ft) 8190 (26. 87) 11 720 (38. 45) 10 740 (35. 24) 7500 (24. 61) 1910 (6. 27) 7610 (24. 97) 6310 (20. 70) R3. 2DB (10. 5ft) mm(ft) 7490 (24. 57) 11 020 (36. 15) 10 320 (33. 86) 7110 (23. 33) 2610 (8. 56) 6820 (22. 38) 5500 (18. 04) MassBoom 6. 18m(20. 28ft) M2. 55TB (8. 37ft) mm(ft) 6650 (21. 82) 10 260 (33. 66) 9970 (32. 71) 6620 (21. 72) 2920 (9. 58) 5810 (19. 06) 4450 (14. 60) 1 Maximum Digging Depth 2 Maximum Reach at Ground Level 3 Maximum Cutting Height 4 Maximum Loading Height 5 Minimum Loading Height 6 Maximum Depth Cut for 2440 mm (8 ft) Level Bottom 7 Maximum Vertical Wall Digging Depth 17 336ELHydraulicExcavatorSpecifications OperatingWeightandGroundPressure 850mm(33. 5in) TripleGrouserShoes kg(lb) kPa(psi) LongUndercarriage HD Reach Boom ­ 6. 50 m (21. 33 ft) R3. 9DB (12. 8 ft) 37 696 (83, 105) 52. 1 (7. 56) R3. 2DB (10. 5 ft) 37 532 (82, 744) 51. 9 (7. 53) ES Reach Boom ­ 6. 50 m (21. 33 ft) ­ including 7. 0 mt (7. 7 t) counterweight R3. 9DB HD (12. 8 ft) 39 370 (86, 796) 54. 5 (7. 90) R3. 2DB HD (10. 5 ft) 39 126 (86, 258) 54. 1 (7. 85) Mass Boom ­ 6. 18 m (20. 28 ft) M2. 55TB (8. 37 ft) 38 686 (85, 288) 53. 5 (7. 76) 800mm(31. 5in) TripleGrouserShoes kg(lb) kPa(psi) 700mm(27. 6in) TripleGrouserShoes kg(lb) kPa(psi) 37 415 (82, 486) 56. 8 (8. 24) 36 731 (80, 978) 63. 7 (9. 23) 37 251 (82, 124) 56. 6 (8. 20) 36 567 (80, 616) 63. 4 (9. 19) 39 089 (86, 176) 59. 3 (8. 60) 38 405 (84, 668) 66. 6 (9. 65) 38 845 (85, 638) 59. 0 (8. 55) 38 161 (84, 131) 66. 2 (9. 59) 38 405 (84, 668) 58. 3 (8. 45) 37 721 (83, 160) 65. 4 (9. 48) 18 MajorComponentWeights* kg Base machine (with boom cylinder, without counterweight, front linkage and track) Long Undercarriage Counterweight 6. 0 mt (6. 6 t) 7. 0 mt (7. 7 t) Boom (includes lines, pins and stick cylinder) HD Reach Boom ­ 6. 50 m (21. 33 ft) ES Reach Boom ­ 6. 50 m (21. 33 ft) Mass Boom ­ 6. 18 m (20. 28 ft) Stick (includes lines, pins and bucket cylinder) R3. 9DB HD (12. 8 ft) R3. 9DB ES (12. 8 ft) R3. 2DB HD (10. 5 ft) R3. 2DB ES (10. 5 ft) M2. 55TB (8. 37 ft) Track shoe (Long/per one track) 700 mm (27. 6 in) triple grouser 800 mm (31. 5 in) triple grouser 850 mm (33. 5 in) triple grouser Quick Coupler Buckets DB1536GPC 3422192 SAE 2. 28 m3 (2. 98 yd3) TB1676SD 3393748 SAE 2. 41 m3 (3. 15 yd3) *Base machine includes 75 kg (165 lb) operator weight and 90% fuel weight, and undercarriage with center guard. lb 20, 155 13, 228 15, 432 8, 631 9, 231 9, 006 4, 508 5, 150 4, 147 4, 612 4, 885 9, 714 11, 222 11, 841 1, 200 3, 430 4, 861 9142 6000 7000 3915 4187 4085 2045 2336 1881 2092 2216 4406 5090 5371 544 1556 2205 19 336ELHydraulicExcavatorSpecifications BucketandStickForces ExtremeServiceand HeavyDutyReachBooms 6. 50m(21. 33ft) Stick R3. 9DB (12. 8ft) kN(lb) General Duty Bucket Digging Force (ISO) Stick Digging Force (ISO) Bucket Digging Force (ISO) Stick Digging Force (ISO) General Duty Capacity Bucket Digging Force (ISO) Stick Digging Force (ISO) Bucket Digging Force (ISO) Stick Digging Force (ISO) Heavy Duty Bucket Digging Force (ISO) Stick Digging Force (ISO) Bucket Digging Force (ISO) Stick Digging Force (ISO) Heavy Duty ­ Power Bucket Digging Force (ISO) Stick Digging Force (ISO) Bucket Digging Force (ISO) Stick Digging Force (ISO) Severe Duty Bucket Digging Force (ISO) Stick Digging Force (ISO) Bucket Digging Force (ISO) Stick Digging Force (ISO) Extreme Duty Bucket Digging Force (ISO) Stick Digging Force (ISO) Bucket Digging Force (ISO) Stick Digging Force (ISO) 211. 8 (4, 761) 144. 9 (3, 257) 188. 5 (4, 237) 141. 5 (3, 181) 209. 7 (4, 714) 144. 3 (3, 244) 187. 5 (4, 215) 140. 9 (3, 167) 209. 9 (4, 719) 144. 5 (3, 248) 184. 9 (4, 157) 140. 7 (3, 163) 234. 2 (5, 265) 146. 6 (3, 296) 205. 0 (4, 608) 142. 5 (3, 203) 209. 9 (4, 719) 144. 5 (3, 248) 184. 9 (4, 157) 140. 7 (3, 163) 209. 9 (4, 719) 144. 5 (3, 248) 184. 9 (4, 157) 140. 7 (3, 163) R3. 2DB (10. 5ft) kN(lb) 211. 8 (4, 761) 166. 7 (3, 747) 188. 5 (4, 237) 162. 1 (3, 644) 209. 7 (4, 714) 165. 9 (3, 729) 187. 5 (4, 215) 161. 4 (3, 628) 209. 9 (4, 719) 166. 1 (3, 734) 184. 9 (4, 157) 161. 1 (3, 622) 234. 2 (5, 265) 169. 0 (3, 799) 205. 0 (4, 608) 163. 4 (3, 673) 209. 9 (4, 719) 166. 1 (3, 734) 184. 9 (4, 157) 161. 1 (3, 622) 209. 9 (4, 719) 166. 1 (3, 734) 184. 9 (4, 157) 161. 1 (3, 622) MassBoom 6. 18m(20. 28ft) M2. 55TB (8. 37ft) kN(lb) 264. 9 (5, 955) 190. 8 (4, 289) 234. 7 (5, 276) 184. 6 (4, 150) ­ ­ ­ ­ 264. 9 (5, 955) 190. 8 (4, 289) 234. 7 (5, 276) 184. 6 (4, 150) ­ ­ ­ ­ 261. 4 (5, 876) 190. 2 (4, 276) 231. 0 (5, 193) 183. 9 (4, 134) ­ ­ ­ ­ 20 336ELHeavyDutyReachBoomLiftCapacities­Americas Load Point Height Load at Maximum Reach Load Radius Over Front Load Radius Over Side Boom ­ 6. 50 m (21. 33 ft) Stick ­ R3. 9DB (12. 8 ft) 1. 5m/5. 0ft 3. 0m/10. 0ft Counterweight ­ 6. 0 mt (6. 6 t) Shoes ­ 800 mm (31. 5 in) triple grouser 4. 5m/15. 0ft 6. 0m/20. 0ft 7. 5m/25. 0ft Bucket ­ None 9. 0m/30. 0ft m ft 9 . 0 m 3 0. 0ft 7 . 5 m 2 5. 0ft 6 . 0 m 2 0. 0ft 4 . 5 m 1 5. 0ft 3. 0 m 1 0. 0ft 1. 5 m 5 . 0ft G round Line ­1. 5 m ­ 5. 0ft ­3. 0 m ­ 10. 0ft ­4. 5 m ­ 15. 0ft ­6. 0 m ­ 20. 0ft kg lb kg lb kg lb kg lb kg lb kg lb kg l b kg lb kg lb kg lb kg lb *8900 *19, 900 *14 100 *31, 550 *20 200 *45, 400 *8900 *19, 900 *14 100 *31, 550 *20 200 *45, 400 *8550 *19, 400 *13 300 *30, 050 *19 400 *43, 850 *24 050 *51, 900 *8550 *19, 400 *13 300 *30, 050 *19 400 *43, 850 *24 050 *51, 900 *15 300 *32, 900 *18 450 *39, 800 *20 100 *43, 450 *20 350 *44, 100 *19 500 *42, 150 *17 350 *37, 450 *13 250 *27, 950 14 850 32, 000 13 700 29, 450 13 050 28, 050 12 800 27, 500 12 800 27, 550 13 000 28, 000 *13 250 *27, 950 *9800 *21, 200 *11 600 *25, 100 *13 300 *28, 800 14 450 31, 000 14 150 30, 450 14 100 30, 350 *13 200 *28, 300 *9400 *9800 *21, 200 9700 20, 850 9100 19, 600 8700 18, 700 8450 18, 200 8400 18, 100 8550 18, 400 8950 *7700 *17, 050 *8000 *17, 550 *8750 *19, 100 *9750 *21, 150 10 600 22, 750 10 300 22, 150 10 100 21, 750 10 100 21, 700 *9900 *20, 850 7650 16, 450 7550 16, 200 7300 15, 650 6950 14, 950 6650 14, 250 6400 13, 700 6200 13, 400 6200 13, 350 6350 13, 700 *7500 *14, 550 *8200 *17, 950 8250 17, 700 8050 17, 300 7900 16, 950 7800 16, 800 5550 11, 850 5450 11, 650 5250 11, 300 5100 10, 900 4950 10, 600 4850 10, 450 *6250 *13, 950 *5800 *12, 850 *5650 *12, 450 *5650 *12, 450 *5850 *12, 850 *6200 *13, 600 *6750 *14, 850 7250 16, 000 8150 18, 000 *9450 *20, 850 *9250 *20, 250 *6250 *13, 950 *5800 *12, 850 5150 11, 500 4650 10, 250 4350 9, 600 4250 9, 350 4300 9, 450 4550 10, 000 5050 11, 200 6150 13, 700 8850 20, 100 7. 35 23. 64 8. 53 27. 74 9. 33 30. 48 9. 84 32. 22 10. 10 33. 11 10. 12 33. 22 9. 93 32. 56 9. 48 31. 09 8. 76 28. 66 7. 69 25. 01 6. 06 19. 44 B oom ­ 6. 50 m (21. 33 ft) Stick ­ R3. 2DB (10. 5 ft) 1. 5m/5. 0ft 3. 0m/10. 0ft Counterweight ­ 6. 0 mt (6. 6 t) Shoes ­ 800 mm (31. 5 in) triple grouser 4. 5m/15. 0ft 6. 0m/20. 0ft 7. 5m/25. 0ft Bucket ­ None 9. 0m/30. 0ft m ft 7 . 5 m 2 5. 0ft 6 . 0 m 2 0. 0ft 4. 5 m 1 5. 0ft 3. 0 m 1 0. 0ft 1. 5 m 5 . 0ft G round Line ­1. 5 m ­ 5. 0ft ­3. 0 m ­ 10. 0ft ­4. 5 m ­ 15. 0ft ­ 6. 0 m ­ 20. 0ft kg lb kg lb kg lb kg lb kg lb kg l b kg lb kg lb kg lb kg lb *8800 *8900 *19, 500 *9550 *20, 800 *10 450 *22, 700 10 550 22, 700 10 300 22, 200 10 200 22, 000 10 250 22, 100 7500 7400 15, 950 7200 15, 450 6900 14, 850 6600 14, 250 6400 13, 800 6300 13, 600 6350 13, 750 5350 5250 11, 250 5100 10, 950 5000 10, 750 *13 500 *17 150 *36, 800 *19 700 *42, 550 *20 550 *44, 550 *20 150 *43, 750 *18 700 *40, 550 *15 900 *34, 100 *13 500 14 400 31, 050 13 450 28, 950 13 050 28, 050 12 950 27, 850 13 050 28, 100 13 350 28, 800 *14 500 *32, 800 *22 850 *51, 700 *21 050 *45, 350 *14 500 *32, 800 *22 850 *51, 700 *21 050 *45, 350 *10 900 *23, 600 *12 600 *27, 250 *14 100 *30, 500 14 450 31, 000 14 250 30, 650 *14 250 30, 750 *12 050 *25, 650 10 100 21, 750 9500 20, 500 9000 19, 450 8700 18, 700 8550 18, 400 8600 18, 500 8800 19, 000 8350 8200 17, 650 8050 17, 300 7950 17, 100 *9100 *20, 150 *8700 *19, 150 *8650 *19, 100 8500 18, 800 8350 18, 350 8600 18, 950 9450 20, 850 *10 800 *23, 750 *10 050 *21, 950 8700 19, 700 6800 15, 100 5850 12, 950 5400 11, 850 5250 11, 500 5350 11, 800 5850 12, 950 7050 15, 600 *10 050 *21, 950 6. 58 21. 25 7. 59 24. 74 8. 21 26. 85 8. 51 27. 92 8. 55 28. 05 8. 31 27. 27 7. 78 25. 48 6. 88 22. 45 5. 43 17. 51 *Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. Always refer to the appropriate Operation and Maintenance Manual for specific product information. 21 336ELHydraulicExcavatorSpecifications 336ELHeavyDutyReachBoomLiftCapacities­Americas Load Point Height Load at Maximum Reach Load Radius Over Front Load Radius Over Side Boom ­ 6. 50 m (21. 33 ft) Stick ­ R3. 9DB (12. 8 ft) 1. 5m/5. 0ft 3. 0m/10. 0ft Counterweight­ 6. 0 mt (6. 6 t) Shoes ­ 850 mm (33. 5 in) triple grouser 4. 5m/15. 0ft 6. 0m/20. 0ft 7. 5m/25. 0ft Bucket ­ None 9. 0m/30. 0ft m ft 9 . 0 m 3 0. 0ft 7 . 5 m 2 5. 0ft 6 . 0 m 2 0. 0ft 4 . 5 m 1 5. 0ft 3. 0 m 1 0. 0ft 1. 5 m 5 . 0ft G round Line ­1. 5 m ­ 5. 0ft ­3. 0 m ­ 10. 0ft ­4. 5 m ­ 15. 0ft ­6. 0 m ­ 20. 0ft kg lb kg lb kg lb kg lb kg lb kg lb kg l b kg lb kg lb kg lb kg lb *8900 *19, 900 *14 100 *31, 550 *20 200 *45, 400 *8900 *19, 900 *14 100 *31, 550 *20 200 *45, 400 *8550 *19, 400 *13 300 *30, 050 *19 400 *43, 850 *24 050 *51, 900 *8550 *19, 400 *13 300 *30, 050 *19 400 *43, 850 *24 050 *51, 900 *15 300 *32, 900 *18 450 *39, 800 *20 100 *43, 450 *20 350 *44, 100 *19 500 *42, 150 *17 350 *37, 450 *13 250 *27, 950 14 950 32, 200 13 750 29, 700 13 150 28, 250 12 900 27, 700 12 900 27, 750 13 100 28, 250 *13 250 *27, 950 *9800 *21, 200 *11 600 *25, 100 *13 300 *28, 800 *14 500 31, 250 14 300 30, 700 14 250 30, 550 *13 200 *28, 300 *9400 *9800 *21, 200 9750 21, 000 9150 19, 750 8750 18, 850 8500 18, 350 8450 18, 250 8600 18, 550 9000 *7700 *17, 050 *8000 *17, 550 *8750 *19, 100 *9750 *21, 150 10 650 22, 950 10 400 22, 300 10 200 21, 950 10 150 21, 900 *9900 *20, 850 *7700 16, 550 7600 16, 300 7350 15, 750 7000 15, 100 6700 14, 400 6450 13, 850 6250 13, 500 6250 13, 450 6400 13, 800 *7500 *14, 550 *8200 *17, 950 8300 17, 850 8100 17, 450 7950 17, 100 7850 16, 950 5600 11, 900 5450 11, 750 5300 11, 400 5100 11, 000 5000 10, 700 4900 10, 550 *6250 *13, 950 *5800 *12, 850 *5650 *12, 450 *5650 *12, 450 *5850 *12, 850 *6200 *13, 600 *6750 *14, 850 7300 16, 150 8200 18, 100 *9450 *20, 850 *9250 *20, 250 *6250 *13, 950 *5800 *12, 850 5200 11, 550 4700 10, 350 4400 9, 650 4300 9, 400 4350 9, 500 4600 10, 050 5100 11, 300 6200 13, 800 8900 *20, 250 7. 35 23. 64 8. 53 27. 74 9. 33 30. 48 9. 84 32. 22 10. 10 33. 11 10. 12 33. 22 9. 93 32. 56 9. 48 31. 09 8. 76 28. 66 7. 69 25. 01 6. 06 19. 44 *Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. Always refer to the appropriate Operation and Maintenance Manual for specific product information. 22 336ELExtremeServiceBoomLiftCapacities­Americas Load Point Height Load at Maximum Reach Load Radius Over Front Load Radius Over Side Boom ­ 6. 50 m (21. 33 ft) Stick ­ R3. 9DB (12. 8 ft) 1. 5m/5. 0ft 3. 0m/10. 0ft Counterweight ­ 7. 0 mt (7. 7 t) Shoes ­ 800 mm (31. 5 in) triple grouser 4. 5m/15. 0ft 6. 0m/20. 0ft 7. 5m/25. 0ft Bucket ­ None 9. 0m/30. 0ft m ft 9 . 0 m 3 0. 0ft 7 . 5 m 2 5. 0ft 6 . 0 m 2 0. 0ft 4 . 5 m 1 5. 0ft 3. 0 m 1 0. 0ft 1. 5 m 5 . 0ft G round Line ­1. 5 m ­ 5. 0ft ­3. 0 m ­ 10. 0ft ­4. 5 m ­ 15. 0ft ­6. 0 m ­ 20. 0ft kg lb kg lb kg lb kg lb kg lb kg lb kg l b kg lb kg lb kg lb kg lb *8800 *19, 600 *13 950 *31, 250 *20 100 *45, 150 *8800 *19, 600 *13 950 *31, 250 *20 100 *45, 150 *8400 *19, 150 *13 200 *29, 800 *19 250 *43, 600 *23 450 *50, 600 *8400 *19, 150 *13 200 *29, 800 *19 250 *43, 600 *23 450 *50, 600 *15 000 *32, 200 *18 050 *38, 900 *19 650 *42, 450 *19 850 *43, 050 *19 000 *41, 150 *16 900 *36, 450 *12 850 *27, 050 *15 000 *32, 200 14 650 31, 550 13 950 30, 000 13 700 29, 400 13 700 29, 450 13 950 30, 000 *12 850 *27, 050 *9550 *20, 650 *11 300 *24, 450 *13 000 *28, 050 *14 150 *30, 600 *14 600 *31, 600 *14 250 *30, 800 *12 800 *27, 500 *9050 *9550 *20, 650 10 350 22, 300 9700 20, 950 9250 19, 950 9000 19, 400 8950 19, 300 9100 19, 650 *9050 *7500 *16, 550 *7800 *17, 050 *8550 *18, 550 *9500 *20, 550 *10 450 *22, 600 10 950 23, 500 10 750 23, 100 10 700 23, 050 *9600 *20, 200 *7500 *16, 550 *7800 *17, 050 7750 16, 700 7400 15, 950 7050 15, 200 6800 14, 600 6600 14, 250 6600 14, 200 6750 14, 600 *7400 *14, 250 *7950 *17, 400 *8450 *18, 350 8500 18, 300 8350 17, 950 8250 17, 800 5900 12, 600 5800 12, 400 5600 12, 000 5400 11, 600 5250 11, 250 5150 11, 100 *6150 *13, 650 *5700 *12, 600 *5550 *12, 200 *5550 *12, 200 *5700 *12, 550 *6050 *13, 300 *6600 *14, 550 *7500 *16, 550 8600 19, 050 *9150 *20, 150 *8900 *19, 500 *6150 *13, 650 *5700 *12, 600 5500 *12, 200 4950 10, 900 4600 10, 150 4500 9, 900 4550 10, 000 4800 10, 600 5400 11, 900 6550 14, 600 *8900 *19, 500 7. 35 23. 64 8. 53 27. 74 9. 33 30. 48 9. 84 32. 22 10. 10 33. 11 10. 12 33. 22 9. 93 32. 56 9. 48 31. 09 8. 76 28. 66 7. 69 25. 01 6. 06 19. 44 B oom ­ 6. 50 m (21. 33 ft) Stick ­ R3. 2DB (10. 5 ft) 1. 5m/5. 0ft 3. 0m/10. 0ft Counterweight ­ 7. 0 mt (7. 7 t) Shoes ­ 800 mm (31. 5 in) triple grouser 4. 5m/15. 0ft 6. 0m/20. 0ft 7. 5m/25. 0ft Bucket ­ None 9. 0m/30. 0ft m ft 7 . 5 m 2 5. 0ft 6 . 0 m 2 0. 0ft 4. 5 m 1 5. 0ft 3. 0 m 1 0. 0ft 1. 5 m 5 . 0ft G round Line ­1. 5 m ­ 5. 0ft ­3. 0 m ­ 10. 0ft ­4. 5 m ­ 15. 0ft ­ 6. 0 m ­ 20. 0ft kg lb kg lb kg lb kg lb kg lb kg l b kg lb kg lb kg lb kg lb *8600 *8700 *19, 100 *9350 *20, 350 *10 200 *22, 200 *11 050 *23, 950 11 000 23, 650 10 900 23, 450 *10 800 *23, 150 8000 7950 17, 050 7700 16, 600 7400 15, 900 7100 15, 250 6900 14, 800 6750 14, 600 6800 14, 700 *13 300 *16 850 *36, 150 *19 350 *41, 800 *20 200 *43, 750 *19 800 *42, 900 *18 350 *39, 700 *15 500 *33, 350 *13 300 15 450 33, 350 14 450 31, 150 14 000 30, 150 13 900 29, 950 14 050 30, 200 14 400 30, 950 *14 400 *32, 600 *22 750 *51, 500 *20 600 *44, 350 *14 400 *32, 600 *22 750 *51, 500 *20 600 *44, 350 *10 700 *23, 150 *12 350 *26, 700 *13 850 *29, 900 *14 700 *31, 800 *14 750 *32, 000 *13 950 *30, 150 *11 750 *25, 000 *10 700 *23, 150 10 200 22, 050 9700 20, 850 9350 20, 100 9200 19, 750 9200 19, 850 9450 20, 400 *8400 8750 18, 750 8550 18, 450 8450 18, 200 5750 5600 12, 050 5450 11, 750 5350 11, 500 *7300 *16, 200 *7100 *15, 650 *7150 *15, 750 *7450 *16, 350 *7950 *17, 500 8150 18, 000 8800 19, 350 *9850 *21, 750 *9900 *21, 800 *7300 *16, 200 6300 14, 050 5600 12, 400 5250 11, 500 5100 11, 200 5200 11, 400 5550 12, 200 6350 14, 000 8100 18, 100 7. 70 24. 98 8. 58 28. 00 9. 13 29. 88 9. 40 30. 84 9. 43 30. 96 9. 22 30. 25 8. 74 28. 65 7. 96 26. 00 6. 75 21. 90 *Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. Always refer to the appropriate Operation and Maintenance Manual for specific product information. 23 336ELHydraulicExcavatorSpecifications 336ELExtremeServiceBoomLiftCapacities­Americas Load Point Height Load at Maximum Reach Load Radius Over Front Load Radius Over Side Boom ­ 6. 50 m (21. 33 ft) Stick ­ R3. 9DB (12. 8 ft) 1. 5m/5. 0ft 3. 0m/10. 0ft Counterweight­ 7. 0 mt (7. 7 t) Shoes ­ 850 mm (33. 5 in) triple grouser 4. 5m/15. 0ft 6. 0m/20. 0ft 7. 5m/25. 0ft Bucket ­ None 9. 0m/30. 0ft m ft 9 . 0 m 3 0. 0ft 7 . 5 m 2 5. 0ft 6 . 0 m 2 0. 0ft 4 . 5 m 1 5. 0ft 3. 0 m 1 0. 0ft 1. 5 m 5 . 0ft G round Line ­1. 5 m ­ 5. 0ft ­3. 0 m ­ 10. 0ft ­4. 5 m ­ 15. 0ft ­6. 0 m ­ 20. 0ft kg lb kg lb kg lb kg lb kg lb kg lb kg l b kg lb kg lb kg lb kg lb *8800 *19, 600 *13 950 *31, 250 *20 100 *45, 150 *8800 *19, 600 *13 950 *31, 250 *20 100 *45, 150 *8400 *19, 150 *13 200 *29, 800 *19 250 *43, 600 *23 450 *50, 600 *8400 *19, 150 *13 200 *29, 800 *19 250 *43, 600 *23 450 *50, 600 *15 000 *32, 200 *18 050 *38, 900 *19 650 *42, 450 *19 850 *43, 050 *19 000 *41, 150 *16 900 *36, 450 *12 850 *27, 050 *15 000 *32, 200 14 750 31, 750 14 050 30, 200 13 800 29, 650 13 800 29, 650 14 050 30, 200 *12 850 *27, 050 *9550 *20, 650 *11 300 *24, 450 *13 000 *28, 050 *14 150 *30, 600 *14 600 *31, 600 *14 250 *30, 800 *12 800 *27, 500 *9050 *9550 *20, 650 10 400 22, 450 9800 21, 100 9350 20, 100 9100 19, 550 9050 19, 450 9150 19, 750 *9050 *7500 *16, 550 *7800 *17, 050 *8550 *18, 550 *9500 *20, 550 *10 450 *22, 600 11 000 23, 650 10 800 23, 300 10 800 23, 200 *9600 *20, 200 *7500 *16, 550 *7800 *17, 050 7850 16, 850 7450 16, 050 7100 15, 300 6850 14, 700 6650 14, 350 6650 14, 300 6800 14, 700 *7400 *14, 250 *7950 *17, 400 *8450 *18, 350 8600 18, 450 8400 18, 100 8350 17, 900 5950 12, 650 5800 12, 450 5650 12, 100 5450 11, 700 5300 11, 350 5200 11, 200 *6150 *13, 650 *5700 *12, 600 *5550 *12, 200 *5550 *12, 200 *5700 *12, 550 *6050 *13, 300 *6600 *14, 550 *7500 *16, 550 8700 19, 200 *9150 *20, 150 *8900 *19, 500 *6150 *13, 650 *5700 *12, 600 *5550 *12, 200 4950 10, 950 4650 10, 250 4550 9, 950 4600 10, 100 4850 10, 700 5400 12, 000 6600 14, 700 *8900 *19, 500 7. 35 23. 64 8. 53 27. 74 9. 33 30. 48 9. 84 32. 22 10. 10 33. 11 10. 12 33. 22 9. 93 32. 56 9. 48 31. 09 8. 76 28. 66 7. 69 25. 01 6. 06 19. 44 B oom ­ 6. 50 m (21. 33 ft) Stick ­ R3. 2DB (10. 5 ft) 1. 5m/5. 0ft 3. 0m/10. 0ft Counterweight­ 7. 0 mt (7. 7 t) Shoes ­ 850 mm (33. 5 in) triple grouser 4. 5m/15. 0ft 6. 0m/20. 0ft 7. 5m/25. 0ft Bucket ­ None 9. 0m/30. 0ft m ft 7 . 5 m 2 5. 0ft 6 . 0 m 2 0. 0ft 4. 5 m 1 5. 0ft 3. 0 m 1 0. 0ft 1. 5 m 5 . 0ft G round Line ­1. 5 m ­ 5. 0ft ­3. 0 m ­ 10. 0ft ­4. 5 m ­ 15. 0ft ­ 6. 0 m ­ 20. 0ft kg lb kg lb kg lb kg lb kg lb kg l b kg lb kg lb kg lb kg lb *8600 *8700 *19, 100 *9350 *20, 350 *10 200 *22, 200 *11 050 *23, 950 11 100 23, 850 10 950 23, 600 *10 800 *23, 150 8050 8000 17, 200 7750 16, 700 7450 16, 000 7150 15, 400 6950 14, 900 6800 14, 700 6850 14, 800 *13 300 *16 850 *36, 150 *19 350 *41, 800 *20 200 *43, 750 *19 800 *42, 900 *18 350 *39, 700 *15 500 *33, 350 *13 300 15 550 33, 600 14 550 31, 350 14 100 30, 350 14 000 30, 150 14 150 30, 400 14 500 31, 150 *14 400 *32, 600 *22 750 *51, 500 *20 600 *44, 350 *14 400 *32, 600 *22 750 *51, 500 *20 600 *44, 350 *10 700 *23, 150 *12 350 *26, 700 *13 850 *29, 900 *14 700 *31, 800 *14 750 *32, 000 *13 950 *30, 150 *11 750 *25, 000 *10 700 *23, 150 10 300 22, 200 9750 21, 000 9400 20, 250 9250 19, 900 9300 20, 000 9500 20, 550 *8400 8800 18, 900 8650 18, 550 8500 18, 350 5800 5650 12, 150 5500 11, 800 5400 11, 600 *7300 *16, 200 *7100 *15, 650 *7150 *15, 750 *7450 *16, 350 *7950 *17, 500 8250 18, 100 8850 19, 500 *9850 *21, 750 *9900 *21, 800 *7300 *16, 200 6350 14, 150 5650 12, 450 5250 11, 600 5150 11, 300 5200 11, 450 5600 12, 300 6400 14, 100 8150 18, 250 7. 70 24. 98 8. 58 28. 00 9. 13 29. 88 9. 40 30. 84 9. 43 30. 96 9. 22 30. 25 8. 74 28. 65 7. 96 26. 00 6. 75 21. 90 *Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. Always refer to the appropriate Operation and Maintenance Manual for specific product information. 24 336ELMassBoomLiftCapacities­Americas Load Point Height Load at Maximum Reach Load Radius Over Front Load Radius Over Side Boom ­ 6. 18 m (20. 28 ft) Stick ­ M2. 55TB (8. 37 ft) 1. 5m/5. 0ft 3. 0m/10. 0ft Counterweight­ 6. 0 mt (6. 6 t) Shoes ­ 800 mm (31. 5 in) triple grouser 4. 5m/15. 0ft 6. 0m/20. 0ft 7. 5m/25. 0ft Bucket ­ None 9. 0m/30. 0ft m ft 7. 5 m 2 5. 0ft 6. 0 m 2 0. 0ft 4. 5 m 1 5. 0ft 3. 0 m 1 0. 0ft 1. 5 m 5 . 0ft G round Line ­1. 5 m ­ 5. 0ft ­3. 0 m ­ 10. 0ft ­4. 5 m ­ 15. 0ft ­ 6. 0 m ­ 20. 0ft kg lb kg lb kg lb kg lb kg lb kg l b kg lb kg lb kg lb kg lb *18 400 *41, 800 *22 250 *48, 350 *18 400 *41, 800 *22 250 *48, 350 *14 850 *31, 900 *18 150 *39, 050 *20 200 *43, 650 *20 450 *44, 300 *19 400 *42, 100 *17 150 *37, 100 *12 650 *26, 750 *14 850 *31, 900 14 000 30, 200 13 200 28, 400 12 900 27, 800 12 950 27, 800 13 150 28, 250 *12 650 *26, 750 *10 300 *22, 700 *10 650 *23, 150 *11 800 *25, 600 *13 300 *28, 800 *14 550 31, 400 14 300 30, 750 14 250 30, 550 *13 050 *28, 100 *10 300 22, 400 10 250 22, 100 9800 21, 150 9300 20, 000 8850 19, 000 8550 18, 450 8500 18, 300 8650 18, 600 *9900 *10 400 *22, 650 10 650 22, 950 10 400 22, 400 10 250 22, 000 10 200 22, 000 7100 6950 14, 950 6700 14, 450 6500 13, 950 6300 13, 600 6300 13, 600 *9100 *20, 150 *8700 *19, 150 *8650 *19, 100 8750 19, 300 8550 18, 850 8850 19, 450 9700 21, 450 *10 800 *23, 750 *10 050 *21, 950 8900 20, 150 6950 15, 500 6000 13, 300 5550 12, 200 5400 11, 850 5500 12, 150 6050 13, 300 7250 16, 050 *10 050 *21, 950 6. 58 21. 25 7. 59 24. 74 8. 21 26. 85 8. 51 27. 92 8. 55 28. 05 8. 31 27. 27 7. 78 25. 48 6. 88 22. 45 5. 43 17. 51 *Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. Always refer to the appropriate Operation and Maintenance Manual for specific product information. 336ELWorkToolOfferingGuide* BoomOption S tickOption H ydraulic Hammer HeavyDutyReachBoom R 3. 9(HD) (12. 8ft) H130s H140Ds MP20 S320B S365C** CVP110 R 3. 2(HD) (10. 5ft) H130s H140Ds H160Ds (pinon) MP20 S320B S365C** CVP110 MassBoom M2. 55 (8. 37ft) H130s H140Ds H160Ds MP30 S325B ExtremeServiceBoom R 3. 9(ES) (12. 8ft) H130s H140Ds H160Ds MP20 S320B S325B S365C** CVP110 R 3. 2(ES) (10. 5ft) H130s H140Ds H160Ds MP20 S320B S325B S365C** CVP110 M ultiProcessor Mobile Scrap and Demolition Shear Compactor (Vibratory Plate) C ontractors' Grapple T rash Grapple Thumbs Rippers R akes CenterLock Pin Grabber Coupler Dedicated Quick Coupler ** oom Mount B CVP110 These work tools are available for the 336E. Consult your Cat dealer for proper match. *Matches are dependent on excavator configurations. Consult your Cat dealer for proper work tool match. 25 336ELHydraulicExcavatorSpecifications 336ELBucketSpecificationsandCompatibility Width Linkage WithoutQuickCoupler General Duty (GDC) DB DB DB DB DB DB DB Heavy Duty (HD) DB DB DB DB DB DB DB DB TB Severe Duty (SD) DB DB DB DB DB 750 900 1050 1200 1350 1500 1650 750 900 1050 1200 1350 1500 1650 1800 1800 750 900 1050 1200 1350 30 36 42 48 54 60 66 30 36 42 48 54 60 66 72 71 30 36 42 48 54 0. 94 1. 23 1. 19 1. 56 1. 46 1. 91 1. 73 2. 26 2. 00 2. 62 2. 27 2. 98 2. 55 3. 33 0. 73 0. 95 0. 95 1. 24 1. 17 1. 54 1. 40 1. 84 1. 64 2. 14 1. 88 2. 46 2. 12 2. 77 2. 36 3. 08 2. 69 3. 52 0. 73 0. 95 0. 95 1. 24 1. 17 1. 54 1. 40 1. 84 1. 64 2. 14 952 1040 1147 1232 1342 1451 1536 1031 1178 1267 1398 1459 1566 1697 1851 2423 1096 1252 1353 1493 1599 2, 099 2, 292 2, 528 2, 716 2, 957 3, 197 3, 386 2, 273 2, 595 2, 793 3, 080 3, 215 3, 452 3, 740 4, 080 5, 340 2, 415 2, 760 2, 981 3, 292 3, 524 100% 100% 100% 100% 100% 100% 100% 100% 100% 100% 100% 100% 100% 100% 100% 100% 90% 90% 90% 90% 90% kg l b 5790 12, 761 4990 10, 998 4360 9, 609 5315 11, 714 4585 10, 105 X X X X X X mm in Capacity m3 yd3 W eight kg lb Fill % M assBoom M2. 55 (8. 37 ft) HeavyDutyBoom R 3. 2 HD (10. 5 ft) R 3. 9 HD (12. 8 ft) E xtremeServiceBoom R 3. 2 ES (10. 5 ft) R 3. 9 ES (12. 8 ft) Maximum load pin-on (payload + bucket) MaximumMaterialDensity: The above loads are in compliance with hydraulic excavator standard EN474, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity with front linkage fully extended at ground line with bucket curled. Capacity based on ISO 7451. Bucket weight with General Duty tips. X 2 100 kg/m3 (3, 500 lb/yd3) 1 800 kg/m3 (3, 000 lb/yd3) 1 500 kg/m3 (2, 500 lb/yd3) 1200 kg/m3 (2, 000 lb/yd3) N ot Recommended 26 336ELBucketSpecificationsandCompatibility Width Linkage WithCenter-LockQuickCoupler General Duty (GDC) DB DB DB DB DB DB DB Heavy Duty (HD) DB DB DB DB DB DB DB DB TB Severe Duty (SD) DB DB DB DB DB 750 900 1050 1200 1350 1500 1650 750 900 1050 1200 1350 1500 1650 1800 1800 750 900 1050 1200 1350 30 36 42 48 54 60 66 30 36 42 48 54 60 66 72 71 30 36 42 48 54 0. 94 1. 23 1. 19 1. 56 1. 46 1. 91 1. 73 2. 26 2. 00 2. 62 2. 27 2. 98 2. 55 3. 33 0. 73 0. 95 0. 95 1. 24 1. 17 1. 54 1. 40 1. 84 1. 64 2. 14 1. 88 2. 46 2. 12 2. 77 2. 36 3. 08 2. 69 3. 52 0. 73 0. 95 0. 95 1. 24 1. 17 1. 54 1. 40 1. 84 1. 64 2. 14 952 1040 1147 1232 1342 1451 1536 1031 1178 1267 1398 1459 1566 1697 1851 2423 1096 1252 1353 1493 1599 2, 099 2, 292 2, 528 2, 716 2, 957 3, 197 3, 386 2, 273 2, 595 2, 793 3, 080 3, 215 3, 452 3, 740 4, 080 5, 340 2, 415 2, 760 2, 981 3, 292 3, 524 100% 100% 100% 100% 100% 100% 100% 100% 100% 100% 100% 100% 100% 100% 100% 100% 90% 90% 90% 90% 90% kg l b 5232 11, 531 4432 9, 768 3802 8, 379 4757 10, 484 4027 8, 875 X X X X X X mm in Capacity m3 yd3 W eight kg lb Fill % M assBoom M2. 55 (8. 37 ft) H eavyDutyBoom R 3. 2 HD (10. 5 ft) R 3. 9 HD (12. 8 ft) E xtremeServiceBoom R 3. 2 ES (10. 5 ft) R 3. 9 ES (12. 8 ft) Maximum load with coupler (payload + bucket) MaximumMaterialDensity: 2 100 kg/m3 (3, 500 lb/yd3) The above loads are in compliance with hydraulic excavator standard EN474, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity with front linkage fully extended at ground line with bucket curled. Capacity based on ISO 7451. Bucket weight with General Duty tips. X 1 800 kg/m3 (3, 000 lb/yd3) 1 500 kg/m3 (2, 500 lb/yd3) 1 200 kg/m3 (2, 000 lb/yd3) 9 00 kg/m3 (1, 500 lb/yd3) N ot Recommended Caterpillar recommends using appropriate work tools to maximize the value customers receive from our products. Use of work tools, including buckets, which are outside of Caterpillar's recommendations or specifications for weight, dimensions, flows, pressures, etc. may result in less-than-optimal performance, including but not limited to reductions in production, stability, reliability, and component durability. Improper use of a work tool resulting in sweeping, prying, twisting and/or catching of heavy loads will reduce the life of the boom and stick. 27 336ELStandardEquipment Standard equipment may vary. Consult your Cat dealer for details. ENGINE C9. 3 diesel engine Bio diesel capable Meets EPA Tier 4 (Interim), EU Stage IIIB, and Japan MLIT Step 4 emissions standards 2300 m (7, 500 ft) altitude capability Electric priming pump Automatic engine speed control Standard, Economy and High Power modes Two speed travel Sidebyside cooling system Radial seal air filter Primary filter with water separator and water separator indicator switch Fuel differential indicator switch in fuel line 2×4 micron main filters and 1×10 micron primary filter in fuel line Water level indicator for water separator HYDRAULICSYSTEM Regeneration circuit for boom and stick Reverse swing dampening valve Automatic swing parking brake High performance hydraulic return filter Capability of installing HP stackable valve and medium and QC valve Capability of installing additional auxiliary pump (up to 80 L/min [20 gal/min]) and circuit Capability of installing boom lowering control device and stick lowering check valve Capability of installing Cat Bio hydraulic oil CAB Pressurized operator station with positive filtration Mirror package Sliding upper door window (lefthand cab door) Glassbreaking safety hammer Removable lower windshield with in cab storage bracket Coat hook Beverage holder Literature holder Radio with MP3 auxiliary audio port Two stereo speakers Storage shelf suitable for lunch or toolbox Color LCD display with warning, filter/fluid change, and working hour information Adjustable armrest Height adjustable joystick consoles Neutral lever (lock out) for all controls Travel control pedals with removable hand levers Capability of installing two additional pedals Two power outlets, 10 amp (total) Laminated glass front upper window and tempered other windows UNDERCARRIAGE Grease Lubricated Track GLT2, resin seal Towing eye on base frame ELECTRICAL 80 amp alternator Circuit breaker Capability to electrically connect a beacon LIGHTS Halogen boom and cab lights with time delay Exterior lights integrated into storage box SECURITY Cat one key security system Door locks Cap locks on fuel and hydraulic tanks Lockable external tool/storage box Signaling/warning horn Secondary engine shutoff switch Openable skylight for emergency exit Rearview cameraready 28 336ELOptionalEquipment Optional equipment may vary. Consult your Cat dealer for details. ENGINE Electric refueling pump with auto shut off Starting kit, cold weather, ­32° C (­26° F) Jump start receptacle Quick drains, engine and hydraulic oil Bio hydraulic oil package with compatible travel motors, fine filtration and bio oil HYDRAULICSYSTEM Control pattern quickchanger, two way Additional circuit Hammer return filter circuit Boom and stick lines Highpressure line Mediumpressure line Cat quick coupler line ­ high and medium pressure capable Quick coupler for high pressure Tool control system Tool 21, Electronic Control device, 1/2P, oneway circuit Tool 20, Electronic Control device, (common), 1/2P, common circuit Tool 25, Electronic Control device, 1P, twoway circuit CAB Cab hatch emergency exit Seat, highback air suspension with heater and cooling Seat, highback air suspension with heater Sunscreen Windshield wiper, lower with washer AM/FM radio Air prefilter Travel alarm Left foot switch Left pedal Straight travel pedal Ashtray UNDERCARRIAGE Long undercarriage: 700 mm (27. 6 in) triple grouser shoes 800 mm (31. 5 in) triple grouser shoes 850 mm (33. 5 in) triple grouser shoes Guard, full length for long undercarriage Guard, heavyduty bottom, 4 mm (0. 16 in), without swivel guard and travel motor protection Center track guiding guard Segmented (3 Piece ) track guiding guard Heavyduty travel motor protection COUNTERWEIGHT 6. 0 mt (6. 6 t) 7. 0 mt (7. 7 t) FRONTLINKAGE Bucket linkage, DB family with lifting eye Bucket linkage, TB family with lifting eye Extreme Service 6. 5 m (21. 33 ft) reach boom with left and rightside light Extreme Service 3. 2 m (10. 5 ft) stick for Extreme Service reach boom Extreme Service 3. 9 m (12. 8 ft) stick for Extreme Service reach boom Heavy Duty 6. 5 m (21. 33 ft) reach boom with left and rightside light Heavy Duty R3. 9DB 3900 mm (12. 8 ft) stick R3. 2DB 3200 mm (10. 5 ft) stick Mass boom 6. 18 m (20. 28 ft) with left and rightside light M2. 55TB1 2550 mm (8. 37 ft) stick LIGHTS Working lights, cab mounted with time delay HID lights, cab mounted with time delay SECURITY FOGS, bolton Guard, cab front, mesh Guard, vandalism Cat MSS (antitheft device) Rubber bumper Rearview camera and mirrors TECHNOLOGY Cat Grade Control, Depth and Slope Product Link 29 Notes 30 31 336ELHydraulicExcavator For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at www. cat. com © 2011 Caterpillar Inc. All rights reserved Materials and specifications are subject to change without notice. Featured machines in photos may include additional equipment. See your Cat dealer for available options. CAT, CATERPILLAR, SAFETY. CAT. COM, their respective logos, "Caterpillar Yellow" and the "Power Edge" trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission. AEHQ6153 (01-2011) [. . . ] [. . . ]