User manual CATERPILLAR RM300 BROCHURE

[. . . ] RM300 Rotary Mixer ® Cat® C11 Engine with ACERT® Technology Gross Power (SAE J1995) Net Power (ISO 9249) at 1800 rpm Rotor Width Rotor Depth (maximum) 261 kW/355 hp 260 kW/354 hp 2438 mm 508 mm Operating Weight (with ROPS and cab) with universal rotor with soil rotor with combination rotor 24 450 kg 23 920 kg 24 640 kg Productivity, Serviceability and Comfort in a Durable Package The RM300 offers enhanced production capabilities, optimized performance, simplified service and exceptional operator comfort. C11 Engine with ACERT® Technology ACERT Technology works at the point of combustion to optimize engine performance and provide low exhaust emissions. Electronically controlled on-demand variable speed cooling fan provides the lowest overall noise levels and high ambient operation capability. Isolated operator's station with heavyduty rubber mounts reduce machine vibration transmitted to the operator. [. . . ] The machine operates at either maximum torque to propel the machine through the toughest conditions or a faster speed for moving around the job site. The propel lever and speed dial control infinitely variable machine speed. Equal hydraulic oil flow to each drive motor increases tractive effort in slippery conditions. 1 2 3 4 Caterpillar C11 Engine Electronic Control Modules Front Wheel Propel Pump Front Flow Divider Control Valve 5 Front Wheel Drive Motor 6 Rear Wheel Propel Pump (optional) 7 Rear Flow Divider Control Valve (optional) 8 Rear Wheel Drive Motor (optional) 7 Rear Wheel-Drive Optional rear wheel-drive includes a separate hydraulic pump and large displacement motors on each rear wheel. One pump is dedicated to drive the front wheels, while the second propel pump is dedicated to drive the rear wheels. High torque large displacement motors on rear wheels makes this a true four-wheel drive machine. Tyres with an aggressive tread and large footprint propels the machine easily in the most severe applications. This feature can be activated by a switch on the operator's console when maximum tractive effort is required. The mechanical rotor drive system provides three rotor speeds for maximum performance in a variety of materials and cutting depths. The hydraulically engaged clutch, high torque mechanical transmission and drive axle allows efficient and reliable transfer of engine power to rotor and is sized to handle tough cutting and deep mixing. Three rotor speed selection provides maximum performance in a variety of materials and cutting depths. Second and third rotor speeds can be used as blending or mixing passes. 1 2 3 4 Caterpillar C11 Engine Clutch Transmission Axle 5 Rotor 6 Rotor Drive Chains 7 Shear Disc 8 Mixing Chamber Mixing chamber is a heavy-duty hood with large volume to handle deep mixing. The mixing chamber allows the rotor to move independently so that the capacity of the chamber actually increases in deeper cuts to allow better material mixing. Total machine weight on rotor helps keep rotor steady in the cut for uniform depth control. Allows more precise sizing control when operating in the reverse direction. Side access doors enable quick and simple replacement of cutting tools on rotor ends. Hydraulic Front Door Optional front door is ideal for peak efficiency on soil stabilization, bio-remediation or mixing passes on asphalt reclamation. Hydraulic rotor hood tilt rotates hood forward for convenient access to rotor for inspection and tool maintenance. Hinged service doors open wide on sides of engine, rotor hood and on top deck for access to power train and rotor drive components. Three warning levels alert operator to conditions on the machine that require attention. Level Two ­ level one warning plus the warning action lamp flashing. [. . . ] Machine Weights with sliding platform with universal rotor 24 450 kg with soil rotor 23 920 kg with combination rotor 24 640 kg Optional Configurations (add to above figures) ROPS FOPS Cab Tires Front 713 mm x 660 mm 18-ply lug-type R-1 262 kPa Rear 467 mm x 762 mm 12-ply lug-type R-1 221 kPa Service Refill Capacities Liters 512 kg 213 kg 468 kg Fuel tank (useable) Cooling system Engine oil w/filter Propel planetary gear reducer (each) Hydraulic tank Rotor drive axle Rotor axle hub (each) Rotor bearing reservoir Chain case (each) Rotor transmission 1056 62. 7 14 RM300 Rotary Mixer specifications Optional Equipment Some options listed may be an option in some areas and standard in others. The two-post structure that bolts directly onto flanges welded to the mainframe. Bolts directly to the ROPS which provides Level 1 protection and also serves as a sun canopy. [. . . ]