User manual CHANEY INSTRUMENT MODEL 00594 PROFESSIONAL WIRELESS WEATHER STATION
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual CHANEY INSTRUMENT MODEL 00594 PROFESSIONAL WIRELESS WEATHER STATION. We hope that this CHANEY INSTRUMENT MODEL 00594 PROFESSIONAL WIRELESS WEATHER STATION user guide will be useful to you.
 |
Manual abstract: user guide CHANEY INSTRUMENT MODEL 00594 PROFESSIONAL WIRELESS WEATHER STATION
Detailed instructions for use are in the User's Guide.
[. . . ] · Temperature measurement ranges: Indoor main unit: +32º F to +122º F ( 0ºC to +50ºC ) Outdoor wireless sensor: -4º F to +158º F (-20ºC to +70ºC ) · Battery operated. (batteries not included 2x "AA", 2 x "AAA") 1 CHECK PACKAGE CONTENTS (1) Main Unit - 2. 75" x 4" x 1. 25"* (1) Wireless Sensor dimensions: 3. 75" x 2. 5" x 1" * (1) Instruction Manual
*Dimensions are approximate.
NOTE: Carefully remove the units from their packaging. [. . . ] 2 READ Please read these instructions carefully before you set up the thermometer. In this way you can become familiar with all of the thermometer's features and get the most benefit from them.
3 SETUP NOTE: The main unit is intended for indoor use only. Choose a dry location away from dust, dirt, mold, smoke and avoid temperature extremes. It is a sensitive electronic device and not designed to withstand high impact blows of any kind. Next, Install 2 "AA" batteries (lithium is recommended for areas where the temperature may fall below -4ºF) into the wireless sensor.
Operating Range of Batteries
LITHIUM BATTERIES ALKALINE BATTERIES
4 CHOOSE WHERE TO PLACE THE MAIN UNIT and WIRELESS SENSOR Main Unit: Choose wall mount or table-top placement. · Choose a location for main unit that is at least 10 feet away from other electronic devices that may interfere with the wireless signal. · Wall mounting: Use the mounting slot on the back of main unit to hang on the wall. 2) Adjust the HOUR setting by pressing the "+" or "-" buttons (NOTE the AM & PM). 3) Confirm and move on to the MINUTE setting by pressing the "ALARM" button. 4) Adjust the MINUTE setting by pressing the "+" or "-" buttons. 5) Confirm and exit alarm setting mode by pressing the "ALARM" button again. To Turn the Alarm On or Off: press and release the "ALARM" button (which will immidiately display the alarm time that is currently set) and then press the "+" button. Reset the Alarm: To turn the alarm off (while it is ringing) for 24 hours, press the "ALARM" button. Snooze/Light: Press the "SNOOZE" button to silence the alarm for 10 minutes. [. . . ] Reset the Alarm: To turn the alarm off (while it is ringing) for 24 hours, press the "ALARM" button. Snooze/Light: Press the "SNOOZE" button to silence the alarm for 10 minutes. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE CHANEY INSTRUMENT MODEL 00594 PROFESSIONAL WIRELESS WEATHER STATION
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual CHANEY INSTRUMENT MODEL 00594 PROFESSIONAL WIRELESS WEATHER STATION will begin.