User manual CHANEY INSTRUMENT MODEL 00738 DIGITAL WEATHER FORECASTING STATION

[. . . ] For wall mounting, use the hanging slot by fastening with a nail or screw. Rainy Sunny Partly Sunny Cloudy Stormy BATTERY INSTALLATION 1. The weather forecaster will automatically read the atmospheric pressure and predict the weather conditions for the next 12 hours. [. . . ] To clear the memory record, press clear while the respective values are displayed on the screen. TEMPERATURE ALERT Minimum and maximum temperature alerts can be programmed for the indoor and remote channel temperatures. To turn the feature on/off, press the alert button once to display icon. Setting Cycle: To set the alert, press the alert button for 3 seconds to enter setting mode. Press the "+" or "-" buttons on the unit to select the desired channel; press alert to confirm your channel selection. Enter the desired upper limit temperature by pressing the "+" or "-" buttons; press alert to confirm the upper setting. WEATHER FORECASTER SET-UP It is important to calibrate the forecaster to the existing outdoor conditions for proper functioning. Select the existing weather condition by pressing the "-" button on the back of the unit. Press the "+" button to confirm the setting. The lower pointer and temperature will begin to flash. Enter the desired lower limit with the +/- buttons; press alert to confirm and exit the temperature alert mode. When the temperature reaches the limit of the preset alert, the pointers and the temperature begin to flash and an alarm will sound. The temperature will continue to flash until it warms or cools from the alert setting. TIME Clock and Calendar Setting: To activate the clock/calendar setting feature, hold the "set" button for 3 seconds to enter the clock mode. [. . . ] If the forecasting icon is not updating according to the weather, you must calibrate the main unit. (See initial setup procedures). LIMITED WARRANTY: Should this product from the Chaney Instrument Co. [. . . ]