User manual CHANEY INSTRUMENT MODEL 00852 RF WIRELESS THERMOMETER

[. . . ] Your new RF Thermometer is build with random security code technology; the home unit will learn the random code of the first remote sensor and log in as Channel 1. Battery Installation Home Receiver: Lift off the battery cover at the back, install 2 AA batteries according to the polarity indicated and close the battery cover. Remote Sensor: This remote comes with a bracket stand that clips onto the back of the unit. [. . . ] The registered channels will be erased when the batteries of the remote sensor or the home unit are removed. When replacing batteries for the remote sensor, remember to clear the corresponding channel of the home unit by removing the batteries or in this way: Select the respective channel by pressing the CHANNEL button, hold the CHANNEL button 3 seconds to clear the registration. When replacing batteries for the home receiver, please remove batteries of all remote sensors and re-install the batteries to the sensors according to the desired channel sequence. Press the TX button on the back of remote sensor to verify the RF reception, hold the button 3 seconds to reset. Replace the cover and tighten the 4 screws. 2 C/ F SELECTION Hold "SET" 3 seconds to enter into the setting mode to select C (Celsius) and F (Fahrenheit). Using " + , - " (on the back of the home unit) to adjust and " SET " to confirm, the following values can be set in sequence: 12/ 24 hr > C/F > Yr > Month > Date > Language > Hour > Minutes > Time Zone Offset > Confirm & Exit. LANGUAGE GE = German EN = English FR = French IT = Italian SP = Spanish CLOCK & CALENDAR SETTING ALARM SETTING Hold "CLEAR/ ALARM" for 3 seconds. Press " +, - " to select AL 1 or AL 2 and press "CLEAR/ ALARM" to confirm. Press " +, - " to enter the desired Hr/ Min values and press "CLEAR/ ALARM" to confirm setting. To view alarm time 1 and 2, repeat press "CLEAR/ ALARM" button at normal mode. Alarm time 1 or 2 will display for 10 seconds and resume to normal clock thereafter. To turn Alarm 1, 2 on and off, repeat press " + " button at normal mode. At snooze mode, the alarm will repeat 10 minutes. SNOOZE / LIGHT Press SNOOZE to trigger snooze alarm. Press to trigger an extended green backlight. MAX/ MIN MEMORY Press the "MAX/ MIN" to view the maximum values for 5 seconds, press again to view the minimum memory. To clear the memory record, press "CLEAR/ALARM" while the respective values displaying on screen. Temperature Trend Indicator: The 3 icons will indicate Rising, Steady, Falling if the temperature change is more than 1 degree in an hour. TEMPERATURE ALERT Press "ALERT" to turn temperature alert on and off. [. . . ] 30M (100 ft. ) open area, RF434 MHz 0. 1 degree for temperature 2 AA's for home unit and 2 AAA's for remote sensor LIMITED WARRANTY-- INTERNATIONAL Consumer may have more remedies at law than follows. Chaney Instrument Company warrants to the owner, this product to be free from defect in material and workmanship for one year from date of purchase. CHANEY INSTRUMENT SHALL NOT BE LIABLE FOR ANY INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES, WHETHER ARISING IN CONTRACT OR TORT. [. . . ]