User manual CHEVROLET COBALT SEDAN 2010

[. . . ] 5-30 2010 Chevrolet Cobalt Owner Manual M Service and Appearance Care . i-1 Canadian Owners Propriétaires Canadiens A French language copy of this manual can be obtained from your dealer/retailer or from: On peut obtenir un exemplaire de ce guide en français auprès du concessionnaire ou à l'adresse suivante: GENERAL MOTORS, GM, the GM Emblem, CHEVROLET, the CHEVROLET Emblem, and the name COBALT are registered trademarks of General Motors. This manual describes features that may or may not be on your specific vehicle either because they are options that you did not purchase or due to changes subsequent to the printing of this owner manual. Please refer to the purchase documentation relating to your specific vehicle to confirm each of the features found on your vehicle. [. . . ] After the number is stored the system returns to the main menu. . If the system recognizes the number it responds with "OK, Storing" and repeats the phone number. If the system is unsure it recognizes the phone number, it responds with "Store" and repeats the number followed by "Please say yes or no". The system will ask for the number to be reentered. Using the Digit Store Command The digit store command allows a phone number to be stored by entering the digits individually. The system responds with "Please say the first digit to store" followed by a tone. . 4. After the system stores the phone number, it responds with "Please say the name tag" followed by a tone. 4-77 3. Continue entering digits until the number to be stored is complete. . Using the Directory Command The directory command lists all of the name tags stored by the system. The system responds with "Directory" and then plays back all of the stored name tags. When the list is complete, the system returns to the main menu. If an unwanted number is recognized by the system, say "Clear" at any time to clear the last number. To hear all of the numbers recognized by the system, say "Verify" at any time and the system will repeat them. . 4. The system responds with "Please say the name tag" followed by a tone. The name tag is recorded and the system responds with "About to store <name tag>. Does that sound OK?". . Deleting Name Tags The system uses the following commands to delete name tags: . . Delete Delete all name tags If the name tag does not sound correct, say "No" and repeat Step 5. If the name tag sounds correct, say "Yes" and the name tag is stored. After the number is stored the system returns to the main menu. Using the Delete Command The delete command allows specific name tags to be deleted. The system responds with "Delete, please say the name tag" followed by a tone. . 4-78 3. The system responds with "Would you like to delete, <name tag>?Please say yes or no". . Making a Call Calls can be made using the following commands: . . If the name tag is correct, say "Yes" to delete the name tag. The system responds with "OK, deleting <name tag>, returning to the main menu. " If the name tag is incorrect, say "No". OK, let's try again, please say the name tag. " Dial Digit Dial Call Redial . Using the Dial Command 1. Say the entire number without pausing. . Using the Delete All Name Tags Command The delete all name tags command deletes all stored phone book name tags and route name tags for OnStar, if present. [. . . ] Each bulletin contains instructions to assist in the diagnosis and service of your vehicle. 8-16 Owner Information Owner publications are written specifically for owners and intended to provide basic operational information about the vehicle. In-Portfolio: Includes a Portfolio, Owner Manual, and Warranty Booklet. RETAIL SELL PRICE: $35. 00 (U. S. ) plus processing fee Without Portfolio: Owner Manual only. RETAIL SELL PRICE: $25. 00 (U. S. ) plus processing fee ORDER TOLL FREE: 1-800-551-4123 Monday-Friday 8:00 AM - 6:00 PM Eastern Time For Credit Card Orders Only (VISA-MasterCard-Discover), visit Helm, Inc. [. . . ]