User manual CISSELL CHMW35-WE110-132-165
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual CISSELL CHMW35-WE110-132-165. We hope that this CISSELL CHMW35-WE110-132-165 user guide will be useful to you.
Manual abstract: user guide CISSELL CHMW35-WE110-132-165
Detailed instructions for use are in the User's Guide.
[. . . ] 4 3 Installation and connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Ground . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Anchoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Water connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] By means of the START button (S), you can each time reduce 10 minutes.
The programmed stop time is executed after the decimal point in the right display has extinguished. The stop time cannot be programmed during spin.
Remark :
Function F2 (soak) This function can only be chosen during prewash, main wash and first rinse. The bath is filled till high water level and heated up to 40 °C (if a higher temperature was programmed, this will be followed). As long as this temperature is not reached, the machine makes a reduced wash action ( shorter action time and longer pause time). When the bath has reached its temperature, the drum will make one left/right rotation every 4 minutes. Should the temperature fall, the water will be heated again, during which the action will be reduced again. This function remains active until the START button (S) is pressed again. Programmable soak time : In the same way as for the stop time, you can program the soak time (see programmable stop time).
16
4
Function F3 (reduced wash action): By selecting F3, the wash action time and pause time will be reversed; unless the wash action time was programmed to be shorter than the pause time. pause This function does not influence the cycle time - the program continues normally - and remains active until the START-button (S) is pressed. Function F5 (rapid advance): This function is mostly used by technicians and maintenance staff. By pressing and releasing the ECO-button (E), the programs skips to the next segment.
Attention!
If F5 is activated during final spin, this segment of the program will be skipped as described above. The left display will alternately show temperature and "StO", while the central display is showing "F1". When this has been done, press the START-button (S) to continue the run of the program. To remove any possible remains of corrosive products in the tub, the machine will rinse an additional 2 seconds. Programmable automatic start By using this function a program can be started up to 99 hours later. Programming: After selecting the program, press the SELECT-button (P) again and keep it depressed. Every push on the SELECT-button (P) will add 10 minutes to the delayed start time. Hours and minutes are separated by a decimal point: 1. 5 stands for 1 hour and 50 minutes. Operation: After having set the desired delay time, the count-down can be started by pressing the START-button (S). During the count-down the displays blink and the remaining time is counted down. When the delay time has elapsed, the program is started automatically.
19
4
Linking 2 programs It is possible to run 2 programs automatically in sequence. This can be handy to perform very special functions (like waterproofing outerwear) and add these to the wash program. [. . . ] When the price has been adjusted to requirements and no more adjustments are necessary to this program price, press the SELECT-button (P) again. Repeat the previous actions if the price of this program has to be modified as well. When all program prices have been properly set, exit the price setting mode by pressing the button or pushing the coin meter switch-lever back down again once more.
Hidden buttons
26
5
After programming the price for the last program, there are still the following parameters : A : Eco - price This is the decrease in value of the price for economical wash. In other words, the amount that the customer is saving by using economic wash. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE CISSELL CHMW35-WE110-132-165
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual CISSELL CHMW35-WE110-132-165 will begin.