User manual CISSELL VSBMAN61

[. . . ] Va c u u m Spotting Board Model A OWNERS MANUAL CISSELL MANUFACTURING COMPANY HEADQUARTERS 831 SOUTH FIRST ST. BOX 32270 LOUISVILLE, KY 40232-2270 PHONE: (502) 587-1292 SALES FAX: (502) 585-3625 SERVICE/PARTS FAX: (502) 681-1275 THIS MANUAL MUST BE GIVEN TO THE EQUIPMENT OWNER. MAN61 (ECN5680) 10/99 WB 2C Page1 WARRANTY The Cissell Manufacturing Company (Cissell) warrants all new equipment (and the original parts thereof) to be free from defects in material or workmanship for a period of one (1) year from the date of sale thereof to an original purchaser for use, except as hereinafter provided. With respect to non-durable parts normally requiring replacement in less than one (1) year due to normal wear and tear, including, but not limited to, cloth goods, valve discs, hoses, and iron cords, and with respect to all new repair or replacement parts for Cissell equipment for which the one (1) year warranty period has expired, or for all new repair or replacement parts for equipment other than Cissell equipment, the warranty period is limited to ninety (90) days from date of sale. [. . . ] 1 1/4 Operating Steam Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (6. 9 Bars) Steam Supply Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2" Pipe (DN15) Steam Return Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2" Pipe (DN15) Vacuum Outlet Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1/4" Pipe (DN32) Vacuum Requirement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Press capacity (1/2 Hp. ) NOTE: An air compressor is required for the heated compressed air feature. (746W) compressor delivering 6 (2. 8 I/s) to 8 (3. 8 I/s) cfm at 80 (356N) to 125 (556N) lbs. (1119W) compressor will accomodate two boards. INSTALLATION OF STEAM LINES Steam supply line must fall towards machine (without water pockets. ) Connect spotting board to steam supply line with union, globe valve and 12" (or more) riser, as illustrated on previous page. If spotting board is located at the end of stream line, extend line at least 4 feet beyond machine, and install a by-pass trap and check valve as illustrated in dotted lines; if gravity return, omit trap. Connect spotting board to steam return line with a swing connection, unions, strainer, trap, check valve and 12" (or more) riser as illustrated on rever se side. Inspect trap carefully for inlet and outlet markings and install swing connection, trap, and check valve as close to machine as possible with trap as close to floor as practical. Use a separate trap for the spotting board; keep it clean and in good working condition for best performance. IMPORTANT: Before installing trap and connecting steam return line, open globe valve in steam supply connection and flush pipe dope, borings and other foreign matter, from steam connections and steam chamber within spotting board. Failure to do this may later cause trap trouble. Page6 VACUUM SPOTTING BOARD VACUUM SPOTTING BOARD MECHANICAL OPERATION Vacuum draws uniformly through the screen area on the nose of the board and the nose of the swinging sleeve board by pressing on the middle foot pedal. By pushing the swinging sleeve board back, the vacuum operates on the nose of the large board. By pulling the swinging sleeve board forward, vacuum operates on its nose. Changing the position of the swinging sleeve board operates a self-cleaning valve which gives full unrestricted passage for vacuum at all times. Steam is released from the spotting gun by pressing the left foot pedal as follows: a slight touch releases a feather of dry steam; partly down releases dry steam; half-way down releases moist steam; completely down releases wet steam. Hot air for drying is released from the spotting gun by pressing the right foot pedal. Automatic check valve releases all chemicals and water from vacuum chamber to an extra large drain recepticle. Adjustable board for operator comfort from 37" to 44" in height. Loosen knob near top of the column, slide top assembly up or down to desired height, then tighten knob. MECHANICAL MAINTENANCE CLEANING LARGE PAN ASSEMBLY Lift chemical tray and large vitrelite glass from board. [. . . ] FB15 VSB128 FB381 V18 FB931 SF49 V51 V56 FB124 Description Lever Roll Pin Dummy Valve Assy. Hd Cap Screw Page19 VSB-115 - STEAM VACUUM PARTS - CONSISTS OF PARTS 1-13 FB80 STEAM VACUUM VALVE W/VENTURI CONSISTS OF PARTS REF. FB32 FB9 FB12 FB11 VSB29 SF117 SF120 SF46 VSB30 VSB31 J10 VSB154 FB124 Description Gasket Steam Vacuum Body Orifice Venturi 3/8" Copper Tubing 3/8" Compression Bead 3/8" Compression Nut 1/4" MPT x 3/8" Tube Elbow Steam Vacuum Valve 16" Pedal Rod 3/16 - 3 Eye Bolt #10 - 24 Wing Nut 5/16 - 18 Hex Hd. Cap Screw Page20 CISSELL HEAD VALVES OP547 . . . . . . . . . . . . . . . . . . . . . . [. . . ]