User manual CLARION CZ309A

[. . . ] CZ309A English 2 CZ309A Thank you for purchasing this Clarion product. Please read this owner's manual in its entirety before operating this equipment. Check the contents of the enclosed warranty card and keep it carefully with this manual. English Contents 1. FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] To select a track, press the [x] or [v] button. Folder repeat play This function allows you to play a track currently being played in the MP3/WMA/AAC folder repeatedly. Press and hold the [RPT] button for 1 second or longer to perform folder repeat play. Random play This function allows you to play all tracks recorded on a disc in a random order. Press the [RDM] button to perform random play. Top function The top function resets the CD player to the first track of the disc. 1) on the disc. In case of MP3/WMA/AAC, the first track of a folder being played will be returned. Folder random play This function allows you to play all the tracks of all the folders recorded on an MP3/WMA/AAC disc in a random order. Press and hold the [RDM] button for 1 second or longer to perform folder random play. Other various play functions Scan play This function allows you to locate and play the first 10 seconds of all the tracks recorded on a disc. Press the operating button previously selected. The various play mode is canceled and the various play off mode appears in the display for 2 seconds. Folder scan play This function allows you to locate and play the first 10 seconds of the first track of all the folders on an MP3/WMA/AAC disc. Press and hold the [SCN] button for 1 second or longer to perform folder scan play. Repeat play This function allows you to play the current track repeatedly. Press the [RPT] button to perform repeat play. CZ309A 15 Operations Common to Each Mode English To change adjustment setting 1. Press and hold the [DISP] button for 1 second or longer to switch to the adjustment selection display. "CLOCK" "SETTINGS" "SCRN SVR" "MSG INP" "SCROLL" "DIMMER" "A-CANCEL" "TEL-SP" "TELSW" "S-CHECK" 3. Press the [w] or [z] button to select the "desired setting value". In the case of display blinking "ENT", you can press the [ ] button to adjust the setting value. After completing settings, press the [DISP] button to return to the previous mode. Turning the screen saver function on or off This unit is provided with the screen saver function which allows you to show various kinds of patterns and characters in the operation status indication area of the display in a random order. If the button operation is performed with the screen saver function on, the operation display corresponding to the button operation is shown for about 30 seconds and the display returns to the screen saver display. The factory default setting is "ON". 2-1. Each time you press the [w] or [z] button, the setting changes in the following order: "MESSAGE" "ON" "OFF" Setting the clock 2-1. Press the [w] or [z] button to set the correct time. The clock is displayed in 12-hour format. Entering message information Message up to 30 characters long can be stored in memory and displayed as a type of screen saver setting. The factory default setting is "WELCOME TO CLARION". 3-4. Press the [ memory. ] button to store the time into Note: · You cannot set the clock when it is displayed with only the ignition on. If you drain or remove the car's battery or take out this unit, the clock is reset. While setting the clock, if another button or operation is selected, the clock set mode is canceled. Displaying the settings The number of indicator of this unit decreases, you can see the state of current settings at any operation mode. Press the [w] or [z] button to display the state of current settings. When the setting is selected, after 1 second the current state will be displayed. 2-1. Press and hold the [BND] button for 1 second or longer to clear the old message. Each time you press the [BND] button, the character type changes in the following order: Capital letters Numbers Symbols Capital letters. . . Press and hold the [ ] button for 2 seconds or longer to store the message in memory. [. . . ] Disconnect the device and reconnect securely. USB/MTP/iPod Sound is The MP3/WMA/AAC files are Use only properly encoded MP3/WMA/AAC files. According to the state of operation on the device, the communication fault is caused. If the device is still not recognized, try replacing with a different device. Disconnect the device and reconnect. The device has been inserted Try reversing the connection direction of the device improperly. [. . . ]