User manual CLARION DB355MP

[. . . ] Owner's manual Mode d'emploi Manual de instrucciones Contents 1. FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CONTROLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 SOURCE UNIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Turning the [ROTARY] knob clockwise emphasizes the treble; turning it counterclockwise attenuates the treble. The factory default setting is "0". (Adjustment range: -7 to +7) Adjusting the volume Turning the [ROTARY] knob clockwise increases the volume; turning it counterclockwise decreases the volume. The volume level is from 0 (minimum) to 33 (maximum). Adjusting the balance 1. Turning the [ROTARY] knob clockwise emphasizes the sound from the right speaker; turning it counterclockwise emphasizes the sound from the left speaker. The factory default setting is "0". (Adjustment range: L13 to R13) Setting the Z-Enhancer This unit are provided with 3 types of sound tone effects stored in memory. Select the one you prefer. 10 DB355MP Basic Operations English Adjusting the fader 1. Turning the [ROTARY] knob clockwise emphasizes the sound from the front speakers; turning it counterclockwise emphasizes the sound from the rear speakers. The factory default setting is "0". (Adjustment range: F12 to R12) Note: · Bass and Treble can only be adjusted when the "Zenhancer" is off. 5. Press [ ]/ [ ] button to switch the ADJ mode items, CLOCK(E) SCRN SVR A-SCROLL 6. The ADJ Mode Title will be display for 2 seconds before showing the ADJ Mode setting. Adjusting clock setting 1. Press the [ D ] button and press [ ] / [ ] button to select "CLOCK (E)". Turn the [ ROTARY ] knob clockwise to increases hour/minute or counterclockwise to decrease hour/minute. Press [ the clock will blink for 2 seconds and return to "CLOCK(E)". Note: · If you remove the vehicle's battery for a check or repair, the clock will be reset, so you must set it again. Turning on/off MAGNA BASS EX The MAGNA BASS EX does not adjust the low sound area like the normal sound adjustment function, but emphasizes the deep bass sound area to provide you with a dynamic sound. The factory default setting is off. Press and hold the [A-M] button for 1 second or longer to turn the MAGNA BASS EX and "M-B EX" in the display lights on or off. Switching display Press the [D] button to select the desired display. The display switches in the following order: Main Display Clock Display Main Display . . . If the display is changed by other button operation when the clock is displayed, the clock display returns automatically after the operation. Adjusting screensaver setting 1. Press the [ D ] button and press [ ] / [ ] button to select "SCRN SVR". "SS ON" or "SS OFF" will be display after 2 seconds. Turn the [ROTARY] knob clockwise to turn on the screensaver or counterclockwise to turn off the screensaver. If Screensaver setting is set to on, Screensaver will be activated after 30 seconds no key operation. Illumination dimmer function When the illumination line of this unit is connected with the car-side illumination signal line, the display illumination of this unit dims in connection with turning on the car-side illumination. ADJ mode adjustment 1. Press [D] button more than 1 second at POWER ON mode to enter ADJ mode, the previous selected ADJ items will be called out. Press [D] button again at ADJ mode will cancel ADJ mode and return to previous display. (Mode changes of LOADING, EJECT, interruption and interruption release) Adjusting auto-scroll setting ]/[ ] 1. Press the [ D ] button and press [ button to select "A-SCROLL". [. . . ] The displayed item can be scrolled by pressing the [T] button for more than 1 second. If a MP3 file does not support for ID3 TAG, the display will show "NO TAG" 5. If a MP3 file encode with ID3 TAG header but no consist of any TAG information, the display will show nothing. Note: · The folder name will be displayed as "ROOT" which the file allocates in the root folder. · The MP3 player decodes each file ID3 TAG ver 2 by default, if ID3 TAG ver 2 is unavailable, ID3 TAG ver 1 will be decoded. [. . . ]