User manual CLARION DB568RUSB

[. . . ] Owners manual Mode demploi Bedienungsanleitung Istruzioni per luso Gebruiksaanwijzing Manual de instrucciones Bruksanvisning Manual de instruções CD/USB/MP3/WMA RECEIVER RECEPTEUR CD/USB/MP3/WMA CD/USB/MP3/WMA RECEIVER RICEVITORE CD/USB/MP3/WMA CD/USB/MP3/WMA ONTVANGER RECEPTOR PARA CD/USB/MP3/WMA CD/USB/MP3/WMA MOTTAGARE RECEPTOR PARA CD/USB/MP3/WMA Thank you for purchasing this Clarion product. Please read this owners manual in its entirety before operating this equipment. After reading this manual, be sure to keep it in a handy place (e. g. , glove compartment). Check the contents of the enclosed warranty card and keep it carefully with this manual. This appliance contains a laser system and is classified as a "CLASS 1 LASER PRODUCT". [. . . ] When "TP" is lit, this means that the RDS broadcast station being received has traffic announcement programmes. 1. Press and hold the [A] button for 1 second or longer to switch to the RDS adjustment selection display. Turn the [ROTARY] knob to select "ON" or "OFF". "REG" in the display lights and REG function turns on. "REG" in the display goes off and REG function turns off. If you press the [TA] button when only "TP" is lit in the display, "TP" and "TA" light in the display and the unit is set into the TA standby mode until a traffic announcement is broadcast. When a traffic announcement broadcast starts, "TRA INFO" appears in the display. If you press the [TA] button while a traffic announcement broadcast is being received, the traffic announcement broadcast reception is cancelled and the unit goes into the TA standby mode. Setting the TA standby mode ON: As "TP" and "TA" lit in the display, press the [TA] button. The "TA" in the display goes off and the TA standby mode is cancelled. If "TP" is not lit, pressing the [TA] button searches for a TP station. Cancelling the TA standby mode OFF: 4. Press the [A] button to return to the previous mode. When "TP" is not lit, if you press the [TA] button, "TA" in the display lights and the unit automatically receives a TP station. Note: If a TP station is not received, the unit continues the search operation. Pressing [TA] button again goes off "TA" in the display and stops TP station searching. Searching for a TP station Manually tuning a regional station in the same network 1. This function is valid when the AF function is ON and the REG function is OFF. Note: This function can be used when a regional broadcast of the same network is received. Auto store function for TP stations 2. Press any one of the [DIRECT] buttons to call out the regional station. If the reception condition of the called out station is bad, press the [DIRECT] button of the same number. The unit receives a local station on the same network. You can automatically store up to 6 TP stations into preset memory. If the number of TP can be received less than 6, broadcast stations already stored in memory and left without being overwritten. 16 DB568RUSB RDS Operations ] As "TA" lit in the display, press and hold the [ button for 2 seconds or longer. The TP stations with the good reception sensitivity are stored into preset memory. Even if you select FM1 or FM2, a TP station is stored into memory for FM3. English Selecting PTY 1. Press and hold the [A] button for 1 second or longer to switch to the RDS adjustment selection display. Press the [ , ] button to select "PTY-S RDS MODE adjustment ] button. Press and hold the [A] button for 1 second or longer to select the RDS MODE. The mode switches as follows each time the [ ] button is pressed: , PTY ON REG ON2 PTY-S<E>1 PTY ON . . . . Press the [A] button to return to the previous mode. Below are the factory default settings stored for the [DIRECT] buttons. Preset number 1 2 3 4 5 6 PTY item ENGLISH Contents News Info Pop M Sport Classics Easy M Press [A] button to exit RDS MODE. Notes: 1 "PTY-S<E>" only available when "PTY ON". 2 "REG ON" only available when "AF ON". PTY This function enables you to listen to a broadcast of the selected programme type even if the unit is on a Function mode other than radio. Some countries do not yet have PTY broadcast. In the TA standby mode, a TP station has priority over a PTY broadcast station. The factory default setting is "OFF". News Information Pop Music Sport Serious Classical Music Easy Listening Music The PTY select mode is cancelled automatically 7 seconds after a PTY is selected. 1. Press and hold the [A] button for 1 second or longer to switch to the RDS adjustment selection display. [. . . ] No sound output when operating the unit with amplifiers or power antenna attached. Power antenna lead is shorted to ground or excessive current is required for remote-on the amplifiers or power antenna. General Nothing happens when button are pressed. Display is not accurate. The microprocessor has malfunctioned due to noise, etc. DCP or main unit connectors are dirty. No sound heard. The speaker protection circuit is operating. DB568RUSB 27 Troubleshooting Problem No sound heard. [. . . ]