User manual CLARION DSH920S

[. . . ] 13 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FEATURES s s s s CeNET Connection RCA Output Switching between Slave, Stand-alone Provided Connection of DSC920S (Exclusive Commander) Supporting the other Manufacturer's Center Units s Antenna Terminals for Satellite and Terrestrial Waves (SMB) s 3 Bands Having 6 Channels each, a Total of 18 Channels for Memorization Enabled 2 DSH920S 2. The first time or when starting after turning off the backup power supply, the receiver does not operate normally until reception. Text data regarding the names of received channels is written to the receiver 30 to 60 seconds after start of normal operation. [. . . ] · Since this manual covers several models, the names of some buttons vary with the model. As shown below, this manual gives the different button names when more than name is used. [FNC] (FUNC) button, [SC] (SCN) button etc. DSH920S 5 Display Items English Source unit display, example 1 Operation status indication : SIRIUS indication Preset channel indication Function mode indication : Manual indication Source unit display, example 2 Operation status indication Preset channel indication : Manual indication : Category indication : SIRIUS indication 6 DSH920S 4. SIRIUS OPERATION Selecting Sirius Radio modes Press the [SAT] button or the [FNC] (FUNC) button to select the Sirius mode. The Sirius indication lights entering the mode that was engaged when the unit was turned off last time. · The [FNC] (FUNC) button selects the external devices connected to the source unit in order, for example: Radio mode § DAB mode § Sirius mode § CD mode § CD changer mode § . . . In the main display, press and hold the [DISP] (D) button for 1 second or longer to cycle between the following display modes: Channel name § title § artist name § category name § text § channel name § . . . Notes: · The Operation status indication of the source unit displays the abbreviated channel name for 2 seconds when a station is selected before returning to the previous display mode. · Scrolling starts when the channel name or other text has been displayed for 2 seconds. · The [ADJ] button is described in the source unit instruction manual either as the [T] (TITLE) button or [A-M] button. This refers to the function of the button labeled "ADJ" on the source unit panel. English Selecting a band Press the [BND] button to select a band. SR1 § SR2 § SR3 § SR1 . . . The currently received band is displayed in the function mode indication. Models without a function mode indication display the band name and channel number in the Operation status indication. or etc. Channel selection Channels are selected with the following buttons. · The [a] or [d] button · A [DIRECT] button · The [SCN] (SC) button · The [CAT] (RDM) button For details, see the following operation descriptions. Notes: The audio output is muted and other button operations are not accepted during channel selection. q Information displayed during reception The following information is displayed in the Operation status indication when Sirius Radio cannot be received normally. · UPDATING : when the receiver is turned on the first time or after a reset · ACQUIRING : when a channel is being tuned in (no signal is yet received) ("LINKING" is shown on an 8digit display) · INVALID CH : a channel without a broadcast has been selected ("INVLD CH" is shown on an 8digit display) · NO SIGN-UP : a channel not covered by your contract · ANTENNA : no antenna is connected or the antenna is defective) Tuning mode (T-MODE) There are two channel selection modes: seek mode and manual mode. q Seek tuning Only channels that can be received are selected while channels without broadcasts and channels not covered by the contract are automatically skipped. The receiver seeks the next available channel below or above the current channel. The main display or the clock display appears each time you press the [DISP] (D) button. DSH920S 7 Sirius operation English The receiver moves to seek channels below or above the current channel. If the channel found when either button is released is available that channel is received. q Manual tuning Any channel including channels without broadcasts and channels not covered by the contract can be selected during manual tuning. Press and hold the [BAND] (BND) button for 1 second or longer. This changes the seek mode to manual mode and the "MANU" indicator on the display lights. [. . . ] CeNET/STAND ALONE switch Be sure to check to see if the select switch located on the back side of the main unit is set to the "CeNET" position. Also, set it to the "STAND ALONE" position when the SIRIUS controller (DSC920S), sold separately, is used. 2. SIRIUS antenna Connect a SIRIUS antenna (sold separately) to the SIRIUS antenna terminal. 3 4 When removing, extract while keep pressing the portion B. Note: · Be sure to turn the main unit power off when the SIRIUS antenna cable is connected. [. . . ]