User manual CLARION DXZ368RMP
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual CLARION DXZ368RMP. We hope that this CLARION DXZ368RMP user guide will be useful to you.
You may also download the following manuals related to this product:
CLARION DXZ368RMP (3502 ko)
CLARION DXZ368RMP (3502 ko)
Manual abstract: user guide CLARION DXZ368RMP
Detailed instructions for use are in the User's Guide.
[. . . ] Owner's manual Mode d'emploi Bedienungsanleitung Istruzioni per l'uso Gebruiksaanwijzing Manual de instrucciones Bruksanvisning Manual de instruções
CD/MP3/WMA RECEIVER/CeNET CONTROL RADIO CD/MP3/WMA/CONTRÔLE CeNET CD/MP3/WMA-RECEIVER/CeNET CONTROL RICEVITORE PER CD/MP3/WMA/CeNET CONTROL CD/MP3/WMA-RECEIVER/CeNET CONTROLE RADIO CD/MP3/WMA/CONTROL CeNET CD/MP3/WMA-LÄSARE/CeNET KONTROLL RECEPTOR CD/MP3/WMA/CONTROLO CeNET
Thank you for purchasing this Clarion product. Please read this owners manual in its entirety before operating this equipment. After reading this manual, be sure to keep it in a handy place (e. g. , glove compartment). Check the contents of the enclosed warranty card and keep it carefully with this manual.
CAUTIONS:
This appliance contains a laser system and is classified as a "CLASS 1 LASER PRODUCT". [. . . ] When a traffic announcement broadcast starts, "TRA INFO" appears in the display. If you press the [TA] button while a traffic announcement broadcast is being received, the traffic announcement broadcast reception is cancelled and the unit goes into the TA standby mode.
· Setting the TA standby mode
3. Turn the [ROTARY] knob to select "ON" or "OFF".
DXZ368RMP
17
RDS Operations
As "TP" and "TA" lit in the display, press the [TA] button. The "TA" in the display goes off and the TA standby mode is cancelled.
If "TP" is not lit, pressing the [TA] button searches for a TP station.
English
· Cancelling the TA standby mode
PTY
This function enables you to listen to a broadcast of the selected programme type even if the unit is on a function mode other than radio.
Some countries do not yet have PTY broadcast. In the TA standby mode, a TP station has priority over a PTY broadcast station. The factory default setting is "OFF".
· Searching for a TP station
When "TP" is not lit, if you press the [TA] button, "TA" in the display lights and the unit automatically receives a TP station.
Note: · If a TP station is not received, the unit continues the search operation. Pressing [TA] button again goes off "TA" in the display and stops TP station searching.
1. Press and hold the [ADJ] button for 1 second or longer to switch to the RDS adjustment selection display. ] lever upward or downward
Auto store function for TP stations
You can automatically store up to 6 TP stations into preset memory. If the number of TP can be received less than 6, broadcast stations already stored in memory and left without being overwritten. ] As "TA" lit in the display, press and hold the [ button for 2 seconds or longer. The TP stations with the good reception sensitivity are stored into preset memory.
Even if you select FM1 or FM2, a TP station is stored into memory for FM3.
"PTY" in the display lights and PTY standby mode is turned on. When the selected PTY broadcast starts, the PTY item name appears in the display.
3. · ON:
· OFF:
"PTY" in the display goes off and PTY standby mode is cancelled.
4. Press the [ADJ] button to return to the previous mode.
· Cancelling a PTY interrupt broadcast
Press the [TA] button during the PTY interrupt broadcast, the PTY interrupt is cancelled and the unit returns to PTY standby mode.
RDS MODE adjustment
Press and hold the [ADJ] button for 1 second or longer to select the RDS MODE. The mode switches as follows each time the [ , ] lever are pressed upward or downward: PTY ON PTY-S<E> ON INFO SEL (E) . . . . Press and hold the [ADJ] button for 1 second or longer to switch to the RDS adjustment mode. Press any one of the [DIRECT] buttons to call the Preset Memory for PTY selection. . Press the [ADJ] button to return to the previous mode.
Below are the factory default settings stored for the [DIRECT] buttons.
Press [ADJ] button to exit RDS MODE.
"REG ON" only available when "AF ON".
18
DXZ368RMP
RDS Operations
Preset number 1 2 3 4 5 6 PTY item ENGLISH Contents News Info Pop M Sport Classics Easy M ENGLISH News Affairs Info Sport Educate Drama Culture Science Varied Pop M Rock M Easy M Light M Classics Other M Weather Finance Children Social Religion Phone In Travel Leisure Jazz Country Nation M Oldies Folk M Document PTY item
English
News Information Pop Music Sport Serious Classical Music Easy Listening Music
The PTY select mode is cancelled automatically 7 seconds after a PTY is selected.
PTY seek
1. Press and hold the [ADJ] button for 1 second or longer to switch to the RDS adjustment selection display. Press the [ a PTY broadcast in the direction of higher ] lever downward to frequencies; press the [ search in the direction of lower frequencies.
If no station with the selected PTY broadcast can be received, the unit returns to the PTY select mode.
PTY preset memory
1. Press and hold the [ADJ] button for 1 second or longer to switch to the RDS adjustment selection display. [. . . ] If the amplifiers turn off before all wires are attached, use an external relay to provide remote-on voltage ( excessive current required). (Speaker volume is reduced automatically when the speaker protection circuit operates). If the sound is muted again, consult our service department.
General
English 34
Incorrect wiring. No sound output when operating the unit with amplifiers or power antenna attached. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE CLARION DXZ368RMP
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual CLARION DXZ368RMP will begin.