User manual CLARION DXZ525

[. . . ] Owner's manual Mode d'emploi Manual de instrucciones AM/FM CD PLAYER WITH DVD/CD/MD CHANGER CONTROL · RADIO AM/FM-LECTEUR CD AVEC COMMANDE DE CHANGEUR DVD/CD/MD · RADIO-REPRODUCTOR AM/FM DE DISCOS COMPACTOS CON CONTROL DE CAMBIADOR DE DVD/DISCOS COMPACTOS/ MINIDISCOS Clarion Co. , Ltd. All Rights Reserved. Printed in China / Imprimé en Chine / Impreso en China 2002/2 (D·C) PE-2509B 280-7813-00 Thank you for purchasing this Clarion product. Please read this owner's manual in its entirety before operating this equipment. After reading this manual, be sure to keep it in a handy place (e. g. , glove compartment). [. . . ] qWhen "EXCITE 0" selected, you can adjust the bass and treble in the range of -3 to 3. When Z-Enhancer Plus is selected, press and hold the [Z-E] button for 2 seconds or longer to change the "CUSTOM" mode. Bass/treble charasteristics become flat and the indication "--FLAT--" is shown in the display. Press the [Z-E] button again to change the "Z+ OFF" mode. Changing the reception area This unit is initially set to USA frequency intervals of 10kHz for AM and 200kHz for FM. When using it outside the USA, the frequency reception range can be switched to the intervals below. While pressing the [DISP] button, each time you press and hold the number "6" of the [DIRECT] buttons for 2 seconds or longer, the reception area switches from inside the USA to outside the USA or from outside the USA to inside the USA. Any station preset memories are lost when the reception area is changed. Turning on/off the loudness The loudness effect emphasizes the bass to create a natural sound tone. When you are listening to music at a low volume, it is recommended to use the loudness effect. Turning the [ROTARY] knob clockwise or counterclockwise to select "LOUD ON"(on) or "LOUD OFF"(off). When loudness effect is turned on, "LD"lights on the display. The factory default setting is "LOUD OFF". Listening to the radio 1. Each time the button is pressed, the radio reception band changes in the following order: FM1 § FM2 § FM3 § AM § FM1. . . Press the [a] or [d] button to tune in the desired station. Tuning There are 3 types of tuning mode available, seek tuning, manual tuning and preset tuning. 14 DXZ525 Radio Operations English Seek tuning 1. Press the [BAND] button and select the desired band (FM or AM). If "MANU" is lit in the display, press and hold the [BAND] button for 1 second or longer. "MANU" in the display goes off and seek tuning is now available. Manual memory 1. Select the desired station with seek tuning, manual tuning or preset tuning. Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store the current station into preset memory. 2. When the [d] button is pressed, the station is sought in the direction of higher frequencies; if the [a] button is pressed, the station is sought in the direction of lower frequencies. Auto store Auto store is a function for storing up to 6 stations that are automatically tuned in sequentially. If 6 receivable stations cannot be received, a previously stored station remains unoverwritten at the memory position. The stations with good reception are stored automatically to the preset channels. If auto store is performed in the FM bands, the stations are stored in FM3 even if FM1 or FM2 was chosen for storing stations. Manual tuning There are 2 ways available: Quick tuning and step tuning. When you are in the step tuning mode, the frequency changes one step at a time. Press the [BAND] button and select the desired band (FM or AM). If "MANU" is not lit in the display, press and hold the [BAND] button for 1 second or longer. "MANU" is lit in the display and manual tuning is now available. Preset scan Preset scan receives the stations stored in preset memory in order. This function is useful when searching for a desired station in memory. When a desired station is tuned in, press the [SCN] button again to continue receiving that station. [. . . ] ERROR DISPLAYS If an error occurs, one of the following displays is displayed. Take the measures described below to eliminate the problem. Error Display ERROR 2 Cause A CD is caught inside the CD deck and is not ejected. Measure This is a failure of CD deck's mechanism and consult your store of purchase. CD CD changer MD changer English ERROR 3 ERROR 6 A CD cannot be played due to scratches, etc. A CD inside the CD changer is not loaded. Replace with a non-scratched, non-warped-disc. [. . . ]