User manual CLARION DXZ646MP

[. . . ] Owner's manual !" DXZ646MP AM / FM CD / MP3 / WMA PLAYER · ^jLcj=`aLjmPLtj^= · AM/FM CD/MP3/WMA Thank you for purchasing this Clarion product. Please read this owner's manual in its entirety before operating this equipment. After reading this manual, be sure to keep it in a handy place (e. g. , glove compartment). Check the contents of the enclosed warranty card and keep it carefully with this manual. [. . . ] When this is set to MP3/WWA type, the CD cannot be played normally in some cases. Listening to a disc already loaded in the unit Press the [FNC] button to select the CD/MP3/ WMA mode. If there is no disc loaded, the indication "NO DISC" appears in the title display. The mode changes each time the [FNC] button is pressed. (Modes are not displayed for equipment that is not connected. ) Radio CD/MP3/WMA (CD changer) AUX (TV) (DVD changer) Disc-In-Play function As long as the ignition key is turned to the ON or ACC position, this function allows you to turn the power to the unit and start playing the disc automatically when the disc is inserted even if the power is not turned on. Loading a CD 1. Press the [OPEN] button to access the CD SLOT behind the FLIP DOWN PANEL. Insert a CD into the center of the CD SLOT with the labeled side facing up. · If the CD is not inserted easily, there may be another CD in the mechanism or the unit may require service. · Discs not bearing the or mark and CD-ROMs cannot be played by this unit. Loading 8 cm compact discs No adapter is required to play an 8 cm CD. Close the FLIP DOWN PANEL. CAUTION · Do not try to put your hand or fingers in the disc insertion slot. · Do not insert discs where adhesive comes out from cellophane tape or a rental CD label, or discs with marks where cellophane tape or rental CD labels were removed. It may be impossible to extract these discs from the unit and they may cause the unit to break down. Backup Eject function Just pressing the [Q] button ejects the disc even if the power to the unit was not turned on. Note: · If the FLIP DOWN PANEL will not open far enough, open it gently with your hand. Note: · Always close the FLIP DOWN PANEL once you take out the disc. CAUTION Be careful not to catch your hand or fingers while closing the FLIP DOWN PANEL. Notes: · If the FLIP DOWN PANEL does not open fully, gently open with your hand. · After loading a CD, always close the FLIP DOWN PANEL. Pausing play 1. To resume CD play, press the [ again. DXZ646MP 17 CD/MP3/WMA Operations English Displaying CD titles This unit can display title data for CD-text/MP3/ WMA disc and user titles input with this unit. Each time you press and hold the [D] button for 1 second or longer, the title display changes in the following order: CD-TEXT disc User title (disc) CD-text title (disc) Artist name CD-text title (track) User title (disc). . . MP3/WMA disc Folder File Album TAG Artist TAG Title TAG Folder. . . Notes: · If the CD playing is not a CD-text CD or no user title has been input, "NO TITLE" appears in the display. · If MP3/WMA disc is not input TAG, "NO TAG" appears in the display. · In the case of album Tags for WMA, the information written into the extension header is displayed. · Only ASCII characters can be displayed in Tags. Folder Select This function allows you to select a folder containing MP3/WMA files and start playing from the first track in the folder. Press the [UP] button to the next folder. 1 Root folder 2 3 4 5 Selecting a track Track-up 1. Press the [d] button to move ahead to the beginning of the next track. [. . . ] Display is not accurate. The microprocessor has malfunctioned due to noise, etc. DCP or main unit connectors are dirty. No sound heard The speaker protection circuit is operating. Wipe the dirt off with a soft cloth moistened with cleaning alcohol. (Speaker volume is reduced automatically when the speaker protection circuit operates). If the sound is muted again, consult our service department. No sound heard MP3/WMA files are absent in Write MP3/WMA files onto the disc properly. [. . . ]