User manual CLARION DXZ766MP

[. . . ] DXZ766MP CD/MP3/WMA RECEIVER/CeNET CONTROL Thank you for purchasing this Clarion product. Please read this owner's manual in its entirety before operating this equipment. After reading this manual, be sure to keep it in a handy place (e. g. , glove compartment). Check the contents of the enclosed warranty card and keep it carefully with this manual. [. . . ] Each time the button is pressed, the radio reception band changes in the following order: F1 (FM1) F2 (FM2) F3 (FM3) A (AM) F1 (FM1). . . Press the [å, ] lever upward or downward to tune in the desired station. Recalling a preset station A total of 24 preset positions (6-FM1, 6-FM2, 6FM3, 6-AM) exists to store individual radio stations in memory. Pressing the corresponding [DIRECT] button recalls the stored radio frequency automatically. Press the corresponding [DIRECT] button to recall the stored station. Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store that station into preset memory. Tuning There are 3 types of tuning modes available, seek, manual and preset tuning. Manual memory 1. Select the desired station with seek tuning, manual tuning or preset tuning. Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store the current station into preset memory. Seek tuning 1. Press the [BND] button and select the desired band (FM or AM). If "MANU" is lit in the display, press and hold the [BND] button for 1 second or longer. "MANU" in the display goes off and seek tuning is now available. Auto store Auto store is a function for storing up to 6 stations that are automatically tuned in sequentially. If 6 receivable stations cannot be received, a previously stored station remains unoverwritten at the memory position. The stations with good reception are stored automatically to the preset channels. 2. Press the [å, ] lever upward or downward to start automatic station tuning. When the lever is moved up, the station is sought in the direction of higher frequencies; if the lever is moved down, the station is sought in the direction of lower frequencies. Manual tuning There are 2 ways available: Quick tuning and step tuning. When you are in the step tuning mode, the frequency changes one step at a time. Press the [BND] button and select the desired band (FM or AM). If "MANU" is not lit in the display, press and hold the [BND] button for 1 second or longer. "MANU" is lit in the display and manual tuning is now available. Preset scan Preset scan receives the stations stored in preset memory in order. This function is useful when searching for a desired station in memory. When a desired station is tuned in, press the [ ] button again to continue receiving that station. Note: · Be careful not to press and hold the [ ] button for 2 seconds or longer, otherwise the auto store function is engaged and the unit starts storing stations. 2. GQuick tuning: Press the [å, ] lever upward or downward and hold in position for 1 second or longer to begin station tuning. GStep tuning: Press the [å, ] lever upward or downward to perform manual tuning. 16 DXZ766MP Radio Operations Instant station recall (ISR) Instant station recall is a special radio preset that instantly accesses a favorite radio station at a touch of a button. GRecalling a station with ISR In any mode, press the [ISR] button to turn on the radio function and tune the selected radio station. Press the [ISR] button again to return to the previous mode. CD/MP3/WMA Operations English MP3/WMA What is MP3? MP3 is an audio compression method and classified into audio layer 3 of MPEG standards. [. . . ] (No sound is produced. ) No audio when operating the unit with amplifiers. Consult Clarion dealer. English Amplifier turn-on lead is Turn the unit off and check each wire for a possible shorted to ground or short. If the amplifier turn-on lead shorts out, cover it excessive current is required. Turn off the power, then press the [RELEASE] button and remove the DCP. [. . . ]