User manual CLARION FZ502

[. . . ] FZ502 Bluetooth® USB/MP3/WMA DIGITAL MEDIA RECEIVER LECTEUR MÉDIA NUMÉRIQUE Bluetooth® USB/MP3/WMA RECEPTOR DE MEDIOS DIGITALES Bluetooth® USB/MP3/WMA Contents Thank you for purchasing this Clarion product. · Please fully read this owner's manual before operating this equipment. · Check the contents of the enclosed warranty card and store it in a safe place with this manual. FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Expanding Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2. [. . . ] HD Radio broadcasts can include multiple channels on the same frequency, which is called multicasting. With multicasting, you can receive up to eight additional multicast channels: HD1~HD8. With an HD Radio tuner connected, you will receive HD Radio digital broadcasts automatically when tuned to a station that offers HD Radio Technology. NOTE: Not all FM or AM stations offer HD Radio (digital) broadcasting. You can receive both analog and digital stations with the unit. Select a band Press and hold the [CONTROL] knob (up long press) on the panel or [BAND/TOP] button on the remote control to change between three FM and one AM bands. Each band stores up to six preset stations. Tuning - Seek Tuning Press and hold the [CONTROL] knob (left / right) on the panel or [ , ] buttons on the remote control to seek the next/previous station automatically. - Manual Tuning Press the [CONTROL] knob (left / right) on the panel or [ , ] buttons on the remote control to move the radio frequency number up or down one step. Accessing radio mode Press the [CONTROL] knob or [SRC / ] button on the remote control to switch to the HD RADIO source, and HD icon will illuminate. FZ502 8 HD Radio Operations HD Radio multicast channels To tune to an HD Radio multicast channel, tune to the main signal and then press the [CONTROL] knob on the panel. · Select PTY type from the category list by rotate [CONTROL] knob and push. · Multi channel is available when a digital signal is detected, the DIGITAL icon will illuminate. If the digital signal becomes unavailable, the unit will revert to Analog reception. iTunes® Tagging Note: Multicast stations can be stored as presets, but the unit must be in Digital or Auto reception mode to receive them. Note: Preset scan Press [SCN/PS/AS] button on the remote control to scan and play all preset stations for 10 seconds each. Press [SCN/PS/AS] button on the remote control again to stop scanning and play the current station. · iPhone can also be connected to this system and "iPod" appearing in this manual should be referred to as "iPod/iPhone". · This system will not operate or may operate improperly with unsupported versions. Downloading tags to your iPod To download tags to your iPod, plug your iPod into the unit. All existing tags are automatically transferred to the iPod and deleted from the head unit's memory. If your iPod is connected when a song is tagged, the Tag will be immediately transferred to the iPod. English 9 Tagging music To begin tagging music, tune to an HD Radio station. The DIGITAL icon at the display must be illuminated, indicating a digital station is being received. The tagging function is highly depends on the receptions of the radio station. If the channel reception is insufficient, it will effect the operation of the tagging function. The song information is saved to the unit memory until your iPod is connected. You can tag up to 64 songs before the tags must be transferred to your iPod or deleted. When the Tag memory reaches capacity (64 tags) the bottom of the screen displays "Memory Full". Table 5: TAG Messages Tag Message Reason S T O R E D T A G # # If the Tag data is ready, and OF 64 [ISR] button on the remote control is pressed SENDING HD TAG Tag data is sending to iPod ## MEMORY FULL Tag storage is full TAG DATA IS NOT Tag data is not available AVAILABLE IPOD FULL iPod memory is full TAG NOT SUPPORT When connect and press [ISR] button on the remote control, the iPod without Tagging function Note: When transferring Tags to your iPod, the unit must remain in HD RADIO mode. To purchase tagged songs, you must sync your iPod to iTunes and then click the "Tagged" list on the left side of the iTunes software screen. [. . . ] Place the mounting bracket into the instrument panel, use a screwdriver to bend each stopper of the mounting bracket inward, then secure the stopper. Take care of the top and bottom of the trim ring and mount it so that all the hooks are locked. Some car models require special mounting kits for proper installation. Fasten the front stopper securely to prevent the source unit from coming loose. [. . . ]