User manual CLARION HX-D2

[. . . ] Owner's manual HIGH-FIDELITY AM/FM CD PLAYER · · Thank you for purchasing this Clarion product. Please read this owner's manual in its entirety before operating this equipment. After reading this manual, be sure to keep it in a handy place (e. g. , glove compartment). This manual includes the operating procedures of the CD changer and TV tuner connected via the CeNET cable. [. . . ] If no CD is loaded in the unit, "NO DISC" appears in the display. Pausing play 1. To resume CD play, press the [s] button again. 14 HX-D2 CD Operations English Fast-forward/fast-backward GFast-forward Press and hold the [D] button for 1 second or longer. GFast-backward Press and hold the [A] button for 1 second or longer. Random play The random play selects and plays individual tracks on a disc in no particular order. "RDM" lights in the display, an individual track is selected randomly and play begins. "RDM" goes off from the display and normal play resumes. Top function The top function resets the CD player to the first track of the disc. 1) on the disc. Scan play The scan play locates and plays the first 10 seconds of each track on a disc automatically. This function continues on the disc until it is cancelled. The scan play is useful when you want to select a desired track. 1. "SCN" goes off from the display and the current track continues to play. Repeat play The repeat play continuously plays the current track. "RPT" lights in the display and the current track is repeated. "RPT" goes off from the display and normal play resumes. HX-D2 15 Operations Common to Each Mode English Setting the clock This unit displays the time when the car engine is running (ACC ON). · When a navigation system is connected, the clock cannot be adjusted as clock data is sent from the navigation system. The previously adjusted item "CLOCK", for example, is displayed on the title display, and the mode changes to the Adjust mode. "PM 2:20") is displayed, and the mode changes to the Clock setup mode. Blinking Selecting the sampling frequency (SAMPLING) GAbout the sampling frequency You can switch between 96 kHz and 48 kHz as the sampling frequency. When the sampling frequency is set to 96 kHz, high band spread, depth of tones and transparency of sound are improved. The factory default setting is "fs=96 kHz". 1. Press the [ ] or [ ] button to select "fs=96kHz" or "NORMAL" (fs=48kHz). Press the [ADJ] button to return to the previous mode. Selecting the audio mode (MODE) * The clock is not adjusted if you press any other button while you are setting the clock. Note: · You cannot set the clock when it is displayed with the power turned OFF. · Set the clock again if you remove the battery for inspection or repairs. Press the [ADJ] button to return to the previous mode. GStandard mode <STANDARD>/Multi mode <MULTI> This is used to make various sound adjustments for playback. For details, see "About the Standard mode and Multi mode" (page 18) GDirect mode <DIRECT> This is used to playback tones as they are without adjusting the tones of this unit. The configuration of the speaker system becomes "front (2ch) + rear (2ch) + non-fader (2ch). " 1. [. . . ] Doing so will trigger the auto store function and start storing stations into memory. Setting the TV diversity (TV DIVER) This function automatically switches to reception by a good-reception antenna during reception of TV broadcasts (when a TV tuner is connected). * The factory default setting is "ON". Set again to "OFF" when the TV diversity antenna is not in use. 1. Press the [ ] or [ ] button to select "ON" or "OFF". Press the [ADJ] button to return to the previous mode. 28 HX-D2 8. [. . . ]