User manual CLARION M255

[. . . ] CHANGES OR MODIFICATIONS TO THIS PRODUCT NOT APPROVED BY THE MANUFACTURER WILL VOID THE WARRANTY AND WILL VIOLATE FCC APPROVAL. Bottom View of Source Unit M255 5 5. HANDLING COMPACT DISCS This unit has been designed specifically for playback of compact discs bearing the mark. To remove the compact disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges. Removing the disc Proper way to hold the compact disc English Note on compact discs Never stick labels on the surface of the compact disc or mark the surface with a pencil or pen. No Do not use any solvents such as commercially available cleaners, anti-static spray, or thinner to clean compact discs. To remove fingermarks and dust, use a soft cloth, and wipe in a straight line from the center of the compact disc to the circumference. No Do not use compact discs that have large scratches, are misshapen, or cracked, etc. [. . . ] Radio mode CD mode Note: · If the CD mode is selected when no disc is inserted, the display shows "NO DISC". Adjusting the bass 1. Turning the [ROTARY] knob clockwise emphasizes the bass; turning it counterclockwise attenuates the bass. The factory default setting is "0". (Adjustment range: ­7 to +7) Adjusting the volume Turning the [ROTARY] knob clockwise increases the volume; turning it counterclockwise decreases the volume. The volume level is from 0 (minimum) to 33 (maximum). Adjusting the treble 1. Turning the [ROTARY] knob clockwise emphasizes the treble; turning it counterclockwise attenuates the treble. The factory default setting is "0". (Adjustment range: -7 to +7) Note: · Bass and Treble can only be adjusted when the "Zenhancer" is off. 8 M255 Basic Operations English Adjusting the balance 1. Turning the [ROTARY] knob clockwise emphasizes the sound from the right speaker; turning it counterclockwise emphasizes the sound from the left speaker. The factory default setting is "0". (Adjustment range: L13 to R13) Switching the clock display Press and hold the [BND] button, and then press the [DISP] button to switch between the operation mode and the clock display. Setting the clock 1. Press and hold the [BND] button, and then press the [DISP] button to display the clock display. Press and hold the [BND] button, and then press the [DISP] button for 2 seconds or longer. Then turn the [ROTARY ] knob clockwise to increase hour / minute or counterclockwise to decrease hour / minute. Press the [BND] button, then clock is set. Note: · If you select another operation mode while you are setting the clock, the clock setting operation will be canceled. · If you remove the vehicle's battery for a check or repair, the clock will reset, so you must set it again. Adjusting the fader 1. Turning the [ROTARY] knob clockwise emphasizes the sound from the front speakers; turning it counterclockwise emphasizes the sound from the rear speakers. The line-level outputs are used in conjunction with the rear speaker settings. The factory default setting is "0". (Adjustment range: F12 to R12) Turning the MAGNA BASS EX on/off The MAGNA BASS EX emphasizes deep bass to provide you with a dynamic sound. The factory default setting is off. Press and hold the [A-M] button for 2 seconds or longer to turn the MAGNA BASS EX and "M-B EX" in the display lights on or off. Turning the screen saver function on or off This unit is provided with the screen saver function. If the button operation is performed with the screen saver function on, the operation display corresponding to the button operation is shown for about 30 seconds and the display returns to the screen saver display. Press the [SS] button while keeping the [BND] button pressed, to turn the screen saver function on or off. M255 9 Radio Mode Operations English FM reception For enhanced FM performance the tuner includes signal actuated stereo control and multipath noise reduction circuits. Manual memory function 1. Press the [BND] button, to select a band you want to store in the memory. Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store the current station into preset memory. Listening to the radio 1. To select a preset band, press the [BND] button, then select one of the preset bands such as FM1, FM2, FM3 or AM. Every time the [BND] button is pressed, the display will change as: FM1 FM2 FM3 AM FM1 3. [. . . ] WIRE CONNECTIONS Head Unit Harness Wire Connections Wire Color Yellow Red Black Blue Orange/White Blue/White Grey Grey/Black White White/Black Purple Purple/Black Green Green/Black Function +12VDC Constant Power Source/Memory +12VDC Switch Lead/Accessory Ground Power Antenna Turn-on Dimmer Amplifier Remote Turn-on Right Front Speaker (+) Right Front Speaker (-) Left Front Speaker (+) Left Front Speaker (-) Right Rear Speaker (+) Right Rear Speaker (-) Left Rear Speaker (+) Left Rear Speaker (-) English Note: All wire functions may not be available on the head unit. RCA Connections Red White Right Rear Line Level Output (Full Range) Left Rear Line Level Output (Full Range) 10. ERROR DISPLAYS To protect the system, this unit has been equipped with self diagnostic functions. Follow the corrective measures and remove the fault. Error Display Corrective Measure This error display indicates that a fault has arisen in the mechanism of the source unit (for example, the disc cannot be ejected). This error display indicates that the pickup focus is off because of a scratched disc or some other factor during source unit play. [. . . ]